Question about Vizio L32 32 in. LCD HDTV

1 Answer

Won't stay on see a flash then turns off - Vizio L32 32 in. LCD HDTV

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

It can be the power supply problem, or the power supply detected shorted circuits so it goes into shutdown mode.
You need to at least open it up and look inside for any bad caps with leaking/bulging tops, you may also have to disconnect the cable from the power supply to the backlights inverter board to see if the TV will stay on (it will have sound but no pictures of course).
You can see the pictures of the boards at www.shopjimmy.com so you will know what the boards look like.

The one shown in my picutres here had blown power supply module and also bad T-CON board, so for the set this old, you can expcet more problem later on.
Most parts that go bad in LCD TV are the power supply module, backlights inverter board, and T-CON board.

If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Posted on Dec 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn Signals stay on, Won't flash on 99 H-D Electra Glide Ultra Classic


Hi Anonymous, check the connections to the turn signal module located under the top fork bracket behind the headlight. Look for corroded, broken or loose pins. Good luck

Mar 13, 2013 | Harley Davidson FLHTCUI Electra Glide...

1 Answer

Monitor button flashes and repeatedly clicks but won't turn on screen


Tell me where on a laptop is a monitor button, first

Post back in a Comment

Regards,
joecoolvette

Mar 08, 2013 | Computers & Internet

1 Answer

Won't stay on


i could be that the rechargeable batter is weak. try replaceing the battery for a new one. also check that the connections for the battery are clearn.

I hope this was useful.

Feb 15, 2013 | Sony Cyber-Shot DSC-P52 Digital Camera

1 Answer

My durango dash lights won't come on and my flashers and turn signals won't blink they just stay on any ideas


for the dash lights i would check the fuse...the turn signals not flashing, u need a flasher, usually by the fuse box,most are silver in color.

Feb 09, 2013 | 2000 Dodge Durango

1 Answer

Directional signals won't flash on a 1992 Buick century


Have you checked or replaced the flasher unit ?
Are all of the bulbs front and rear coming on ?

Jan 29, 2013 | 1992 Buick Century

1 Answer

Connecting - flashes 3 times - picture & sound come on - flashes 2 times and turns off - won't stay on


COULD BE A SHORT IN THE POWER SUPPLY IF YOU ARE NOT A TECH THEN HAVE A TECH REPAIR YOUR TV.GOOD LUCK.

Oct 06, 2011 | LG 42LC2D 42 in. LCD HDTV

1 Answer

My "50" RCA Scenium won't


That's usually caused by a bad lamp. However that chassis is famous for having bad caps on the power board. The repair kit is available at the following link and has repair instructions included. http://servicemanuals.vstore.ca/product_info.php/pName/rca-atc336-dlp-power-board-repair-kit/cName/repair-kits

Aug 16, 2011 | RCA HDLP50W151 50" Rear Projection HDTV

1 Answer

When i turn the ignition on and turn the run off switch to on the check engine lamp flashes and it won't start.


Turn the run switch back to the ON position and start the bike. The check light stays on until that switch is on to show it works.

Jul 03, 2011 | 2007 Buell Lightning XB12Scg

1 Answer

My BB pearl won`t turn on, first the screen went white


You can re-charge your battery fully by the provide electrical charger for 6 hr , then you can try and send me status.

Jul 22, 2010 | RIM BlackBerry Pearl 8100

Not finding what you are looking for?
Vizio L32 32 in. LCD HDTV Logo

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Vizio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...