Question about Cobra 25 LTD 40-Channels Base CB Radio

1 Answer

Cobra 25 uk ltd soundtracker locks up on channels

Bit of a strange 1 this, the cb tx and rx but get locked up on channels ,you are unable to change the channel selector when in the normal mode.by switching the pa on and off a few times it allows you change channel.it also tx and rx on diferent channels normaly 1 on mid and the other on uk, i have checked for dry joints but are unable to find any,any pointers please

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 69 Answers

Probably is the tuner chip or main board that gave troubles...assistance from expert only!
rgds, stefano

Posted on Jan 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Wiring the mic 4 pin


#1 shield #2 white #3 red #4 black
#1 gr #2 tx #3 tx #4 rx

Apr 10, 2014 | Cobra 25 Wx Nw St Classic Cb Radio With...

1 Answer

How do i adjust dead key on a cobra 25 ltd classic cb


The only "adjustment" is the AM POWER trimmer. Lowering this will lower your dead key but will also lower your "swing" power. the TX circuit must be modified to lower the dead key and maintain full output. there are many articles on the web for such modification.

Apr 12, 2013 | Cobra 25 LTD 40-Channels Base CB Radio

1 Answer

Cobra 29 ltd c b radio no tx no rx


you will have to take it to a repair shop and let them fix it or buy another one .

Dec 08, 2012 | Cobra 29 LTD CB Radio

1 Answer

I just picked up a 99 china cobra ltd st. Tx works on all channels, but no Rx on channels 1-19. Any help pointing me in the right direction would be greatly appreciated.


May be bad antenna match on that end. Check SWR at CH 1 and at CH 40. If quite different readings you will need to adjust the SWR and maybe the antenna itself.

Feb 18, 2011 | Cobra 29 LTD CB Radio

1 Answer

I just picked up a 99 china cobra ltd st. Tx works on all channels, but no Rx on channels 1-19. Any help pointing me in the right direction would be greatly appreciated.


somebody tampered with internal adjustors seems to me. you can take a screw driver and turn off receive for so many channels but crank it for higher band. It was probably locked on a upper channel for a Friendly chat station say Channel #28. Where they stayed and talked on 1 channel all time. Could be that. Maybe its got broke wires or board on that other set of channels or parts fried, chip bad etc. Get it checked out at CB shop. if you have any knowledge, turn IF to receive and crank up receive inside radio. If don't know anything take to shop..sounds like simple fix to me.

Feb 18, 2011 | Cobra 29 LTD CB Radio

1 Answer

I have expanded my 25 ltd and want a rx/tx fine tune possibly using the rf gain control?


look at a schematic of a 29ltd to do that.. the 25 does'nt have it in there easily.. the 29 can be fixed to change tx/rx freq. with the delta tune

Feb 11, 2011 | Cobra 25 LTD 40-Channels Base CB Radio

1 Answer

Cobra 200GTL: Clarifier affects TX


Unfortunately, most people look to unlock the clarifier in radio's it is locked in.

From what I understand it is possible to lock it in that radio, however I do not know it because I usually unlock it in my radio's.

I also did a search, and asked a few people I know who are also very good with radio's and they do not know either. The only thing I found was this, and you have to pay this shop to do it.

http://cobraworxshopz.com/12.html


Feb 02, 2009 | Cobra 200 GTL DX 4-Channels Base CB Radio

1 Answer

New final meter says it is not tx wattage


The ERF 2030 will not work with out the added companion parts that need to be added with!! I am assuming you had all the parts with the ERF 2030 and instructions??

The added parts are as follows: along with the ERF 2030
1-EN 1230 & 1- pF Ceramic disk capacitor

E-mail us for other details

Dennis

Nov 14, 2008 | Cobra 25 LTD 40-Channels Base CB Radio

1 Answer

Cobra ltd classic no modulation


Assuming that you've tried another mike, the problem may lie in the speech amplifier circuit within the radio, something that will require someone with technical knowledge to repair.

Sep 22, 2008 | Cobra 25 LTD 40-Channels Base CB Radio

Not finding what you are looking for?
Cobra 25 LTD 40-Channels Base CB Radio Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cobra CB Radios Experts

AnyMHz.com
AnyMHz.com

Level 2 Expert

489 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Brad Brown

Level 3 Expert

13530 Answers

Are you a Cobra CB Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...