Question about IBM ThinkPad X30 2672 Notebook

1 Answer

I am computer illiterate to this computer. I press the start button and lights on the system status indicator come on for afew seconds and go off. screen will not come on. I have removed battery and power cord to reset with no luck. Can anyone suggest anything?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 536 Answers

Unfortunately, it sounds like something has failed in your notebook.
I suggest that you take it in to a service center for a technician to perform diagnostics on it.

Posted on Dec 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset my service engine light on a 2000 mitsubishi galant


  • Turn the ignition key to the "ON" position without starting the engine.
  • 2 Press the button to the left of the display on the instrument panel twice within one second. The oil life status will be displayed on the panel -- this should be past the mileage due for the service interval if the wrench icon is illuminated
  • 3 Turn the ignition key to the "OFF" position within 10 seconds of the status display.
  • 4 Press and hold the button to the left of the display again with one hand while turning the ignition key back to the "ON" position without starting the engine. The oil life status will show once again
  • 5 Continue to hold down the button for a few seconds longer, and then release it. Wait 10 seconds until a chime indicates and displays 6,000 miles for at least another 10 seconds.
  • Aug 16, 2016 | Mitsubishi Cars & Trucks

    Tip

    How to Reset Your Water Filter Light


    <b>Amana:<br /></b> <ol> <li>Press and hold the <b>dispenser lock</b> and <b>auto light</b> buttons on the dispenser for 4 seconds until the filter status indicator begins to flash, then release the buttons.</li></ol>or<br /> <ol> <li>Press and hold the <b>dispenser lock</b> and <b>water</b> buttons for 4 seconds until the filter status indicator begins to flash, then release the buttons.</li></ol>or<br /> <ol> <li>After replacing the water filter, press and hold the Reset Filter pad for 3 seconds. The Order and Replace indicator lights will blink and then go off when the system is reset.</li></ol><span style="font-weight: bold;">Brita:</span><br /> <ol> <li>Press firmly and hold start button for 5 to 10 seconds.</li> <li>Four bars will appear in the display, one after the other, and flash. Do not release the start button until the 4 bars appear and start to flash. If you have difficulty pressing the start button, a capped ballpoint pen may be used to press the button down.</li> <li>A small flashing dot in the lower right corner shows the indicator is working.</li> <li>Every 2 weeks a bar automatically disappears. When only 1 bar remains make sure you have a new filter on hand.</li> <li>After 2 months, when all bars have disappeared, an arrow will flash at the top of the display reminding you to change your filter. </li></ol><b>Frigidaire<br /></b> <ol> <li>Press and hold the <b>reset </b>button on the dispenser until the green light flashes (up to 15 seconds).</li></ol><b>GE:<br /></b> <ol> <li><b>P</b>ress and hold the <b>reset water filter</b> button on the dispenser for 3 seconds.</li></ol>or<br /> <ol> <li> Press the reset button on the dispenser for 4 to 8 seconds then release. </li></ol><b>Hotpoint:<br /> </b> <ol> <li><b>P</b>ress and hold the <b>reset water filter</b> button on the dispenser for 3 seconds.</li></ol> <b>Jenn-Air:<br /> </b> <ol> <li>Press and hold the <b>lock</b> and <b>light</b> buttons (<b>lock and water</b> on newer fridges) on the dispenser for about 4 seconds, until the indicator light blinks.</li></ol><b>Kenmore:<br /></b> <ol> <li>Press and hold the button next to the filter light for 10 seconds.</li></ol><b>KitchenAide</b>:<br /> <ol> <li>Press the <b>light</b> switch 5 times within 10 seconds. If the fridge has a <b>filter button</b>, press and hold it for 5-10 seconds.</li></ol><b>LG:<br /> </b> <ol> <li>Press and hold the <b>reset</b> button for 3 seconds.</li></ol><b>Magic Chef</b> <br /> <ol> <li> Press and hold the light and lock pads until the change filter light flashes. (approximately 3 seconds)</li></ol> <b>Maytag:<br /></b> <ol> <li>Press and hold the <b>lock</b> and <b>light</b> buttons (<b>lock and water</b> on newer fridges) on the dispenser for about 4 seconds, until the indicator light blinks.</li></ol>or<br /> <ol> <li>Press the refrigerator's light switch five times within ten seconds.</li></ol><b>Samsung:<br /> </b> <ol> <li>Press the <b>ice type</b> and <b>child lock</b> buttons simultaneously for 3 seconds. NOTE: Hold the buttons for only 3 seconds. If you press these 2 buttons simultaneously for 5 seconds, the reset function ceases.</li> <li>Release the buttons and repeat the same step one more time. The water filter indicator light should turn green.</li></ol>or<br /> <ol> <li><span>Press and hold the "Alarm/Hold" button for 3 seconds.</span></li></ol>or<br /> <ol> <li><span>Press and hold the <i>Fridge </i>and <i>Power Cool</i> buttons for 3 seconds.</span></li></ol><b>Whirlpool</b>:<br /> <ol> <li>Press the <b>light</b> switch 5 times within 10 seconds. If the fridge has a <b>filter button</b>, press and hold it for 5-10 seconds.</li></ol>

    on Jun 17, 2011 | Refrigerators

    Tip

    Pontiac service light 1983-01


    Firebird

    1998-01

    To reset the "CHANGE OIL" light, press and hold the "TRIP/OIL RESET" button on the instrument panel for 12 seconds. When the light flashes and goes out, the system is reset.


    Grand Am


    1999 -01

    To reset the Change Oil light, open the driver's side instrument fuse panel and turn the ignition on. Press the "RESET" button and release. The light will flash. Press the button again and the system will be reset.


    Grand Prix


    1999-01

    Driver Information Center If Equipped). Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three times within five seconds. If the CHANGE OIL SOON indicator flashes two times, the system is resetting. Turn the ignition key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on, repeat the procedure. To reset the OIL LIFE indictor if equipped with a Trip Computer: Press the trip MODE button until the light appears next to OIL LIFE. Press and hold the trip RESET button until the oil life percentage changes to be 99 percent.


    Grand Prix


    1997-98

    To reset the oil life indicator, press the "MODE" button until the light next to "OIL LIFE" is lit. Press and hold "RESET" for 3 seconds until oil life percentage is 100%.


    Grand Prix SE


    1997

    Turn the ignition on, but do not start the vehicle. Within 5 seconds, push the accelerator to the floor 3 times. Turn the ignition off. Start the car and the Change Oil Soon indicator light will be reset.


    Grand Prix

    w/ Trip Computer

    1988-93

    To reset "CHANGE OIL", "CHANGE OIL FILTER", or the mileage of either on the Trip Compute, continually press the "SERVICE" or "SYSTEMS CHECK" button until the item appears with the mileage below it. Then press the "RESET" button and the mileage will be reset to the maximum value. If you want to reduce this value, hold the "RESET" button down and the mileage will count down. Release the button at the mileage you would like to observe.


    Bonneville,
    6000

    w/ Driver Information Center

    1983-91

    To reset "CHANGE OIL SOON" or "OIL FILTER" or to adjust the mileage on the Driver Information Center, continually press the "DIC" button until either message appears with the mileage below it. At this point, hold down the button. In 5 to 10 seconds, the mileage will count down. When it passes 0, it will cycle back to a maximum figure. Release the button when the mileage gets to the service interval you'd like to observe. If "CHANGE OIL" or "OIL FILTER" already appears, just hold the button down to reset the mileage. "CHANGE OIL" and "OIL FILTER" are reset separately.













    on Dec 07, 2009 | Pontiac Grand Prix Cars & Trucks

    1 Answer

    How to get alarm to stop blinking after replacing water filter


    Here is a list of refrigerator manufacturers and how to reset the filter change indicator light:
    Amana- Press and hold the Auto and Dispenser Lock buttons until the water filter status indicator light flashes.
    Frigidaire- Press and Hold the Reset Button Until the Indicator Light Flashes.
    GE General Electric- Press and Hold the Reset Button for around 8 Seconds.
    HotPoint- Press and Hold the Reset Button for around 8 Seconds.
    Jenn-Air- Press and Hold The Water and Lock Buttons until the Water Filter light flashes.
    Kitchen Aid- Press and Release the Light Button 5 times Quickly.
    Maytag- Press and Hold The Light and Lock Buttons until the Water Filter light flashes.
    Samsung- Press and Hold the Ice Type and Child Lock Buttons at the same time for 3 seconds.
    Whirlpool- Press and Release the Light Button 5 times Quickly.

    Dec 03, 2015 | Fagor FQ9925XUS

    1 Answer

    Have changed water filter, but indicatot panel calls for order h2o filter, and comes on every time we dispence water. why?


    Most models also have a filter indicator reset button located in the same area. After changing the filter, reset the filter status light by pressing the Filter Indicator Reset button or by pressing and holding the Filter button for 3 seconds. The status light will change from red to green or the status display will change from "Replace" to "Good" when the system is reset.

    If your model has a water filter indicator, but no reset button, press the light switch in the refrigerator compartment 5 times within 10 seconds to reset the system. The status light will change from red to green when the system is reset.

    Oct 16, 2012 | KitchenAid KBFA25ER Bottom Freezer French...

    1 Answer

    Battery light flashing orange


    Your battery may have Battery charge status indicator, when you press the button next to the 4 led indicators the LEDs indicate the charge status.
    Also the System Battery/Charge LED indicates the battery's current operational condition.
    Flashing orange indicates Battery failure.

    May 25, 2012 | Dell Inspiron Mini 10v Netbook Computer

    1 Answer

    I changed my water filter but the filter status light still says to change. How do I get it to go to ok status.


    Simply press and hold the dispenser lock and auto light buttons on the dispenser (at the same time) for four (4) seconds until the filter status indicator begins to flash, then release the buttons. On some Amana refrigerators, you need to press the dispenser lock and water buttons for four (4) seconds until the filter status indicator begins to flash, then release the buttons.

    Feb 01, 2011 | Amana Refrigerators

    1 Answer

    Green start button won't stop blinking


    START/RESET status indicator light flashing


    You have pressed the indicator light flashing START/RESET pad while the START/RESET dishwasher is running. This will cancel the cycle. The light will stop flashing after the dishwasher drains (about 90 seconds).


    Press the pad once to start the dishwasher. Press the pad a second time when the dishwasher is running only if you wish to cancel the cycle.


    Power to the dishwasher was turned off while a cycle was running and power has just been restored to the dishwasher. The blinking lights indicate that the dishwasher is draining the potential water inside.


    The light will stop flashing after the dishwasher drains. A new cycle will start automatically.


    Good luck

    Nov 29, 2010 | General Electric GLD6966RSS Stainless...

    1 Answer

    Error code e10


    Communication failure =E10
    1. Rotate the CYCLE SELECT KNOB to the 3 O’clock
    position.
    2. Press and hold the Select and Pause Cancel
    buttons simultaneously for (6) seconds.
    3. Immediately after, press and hold the START and
    Pause Cancel
    buttons simultaneously for (4)
    seconds.
    4. Rotate the CYCLE SELECT KNOB to the 2 O’clock
    position.
    The STATUS indicator lights will flash the number of
    times for the first digit of the code and the START indicator
    light will flash the number of times for the second digit.
    The code is obtained by counting the number of times
    the lights flash. Example E24: the STATUS indicator
    lights would flash twice indicating the 2 and the START
    indicator light will flash four times indicating the 4. The
    STATUS indicator lights and the START indicator light
    will start flashing at the same time. The control will then
    pause for 2 seconds, then repeat the code.
    Troubleshoot the problem by using the chart on next
    page.
    To move to the next code, press the OPTIONS button.
    To clear code, press the Select botton.
    To exit this mode, simultaneously press and hold the
    Select and Pause Cancel buttons for (6) seconds to
    reset.
    if this does not work need to replace control

    Sep 07, 2008 | Frigidaire Washing Machines

    2 Answers

    Water Filter Indicator


    I discovered by sheer luck that if I hold down the OK button for a few seconds the filter indicator changed from the flashing 1% to 99%.

    Aug 01, 2007 | Whirlpool S20DRSS33 Side by Side...

    Not finding what you are looking for?
    IBM ThinkPad X30 2672 Notebook Logo

    Related Topics:

    37 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top IBM Computers & Internet Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18392 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Computer Links

    Level 3 Expert

    2385 Answers

    Are you an IBM Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...