Question about Mackie MR5 MR5 Reference Monitor

Open Question

When I hook these speakers up to my computer and put sound through them, the tweeter part works, but no sound will come through the sub part. What is weird though, when I am getting a text message, the weird sound that comes through electronics happens to my speaker, but the sound comes through the sub. I have no clue to what is wrong.

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 5603 Answers

SOURCE: Need to find out which

You can probably trace which colors go to the smaller of the amps... Yellow is often used for tweeter but there really is no standard. Striped wire is probably the minus lead. If a pair is heavier, that would be the pair for the woofer... and red is often positive for woofer and black the minus. Searching the Mackie schematics doesn't really show colors. You could call their service dept.

Posted on Dec 14, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I service Behringer epa900 speaker


Can't say for sure....there should be a bunch of screws in the back so you can gain access....is this a powered cabinet??...can you dis-connect the present speaker and horn and hook up another just to make a test?? Is the cabinet plastic?? There could be loose screws....Does the cabinet have a recess for a stand??If so, check the retaining screws in that as well....and don't forget to check the grill....

Oct 13, 2014 | Behringer Europort EPA900 Ultra compact...

1 Answer

Peavey sp2 pa speakers quit working


Ok,

First of all i need some more information, such the power amp you've hooked to them rating in watts and please specify if you are not getting sound from tweeter or 15" BW speaker or both of them, this way i can improve accuracy helping you out.

Feb 03, 2013 | Peavey SP2 PA Passive Speaker

1 Answer

How do I hook up passive subs to my board


Sub outs needs an active speaker.

An active speaker have a built in amplifier and preamplifier.

For a passive speaker it needs an amplifier.

Oct 01, 2012 | Mackie 2404-VLZ3 Mixer

1 Answer

On my peavey pro 15 neo speakers i don't know which wire is for what. What is the black, red, blue and yellow wires for?


black and red will goto 1 speaker. and blue/yellow to the other. typically red and yellow are + and black and blue are -. the crossover board might tell you which is which where they solder to it. but i'm pretty sure the black/red goto woofer. try hooking up both to woofer and listen to it. 1 way is going to sound horribly wrong lol. that will mean you hooked up the tweeter leads to the woofer. but DO NOT HOOK UP WOOFER LEADS TO TWEETER. thats why i say to do it on woofer.

Aug 30, 2011 | Peavey PR15 400w PA Speakers

1 Answer

When I connect my cables from the TRS outputs to my direct-field monitors, the latter seem to be unbalanced: one monitor plays more higher frequencies than the other


Plug in one a at time using the same input. Take the left speaker and the left input wire. Plug the wire from the mixer into the one speaker if it sounds ok then unplug the speaker and replace it with the right speaker. If it sounds ok replace the wire with the right wire. This will tell you that each speaker is working and each cable is working. If you switch speakers and they sound different then the possibility of a blown high end driver in one. If they sound ok each by it self but the high end suffers when they are both hooked up then the possibility of the speakers might be. Not sure what the sub has to do with the whold setup. Any further questions call me at the store.

Vito Vacirca Jr.

Pro Line Music

490 Lincoln Highway

Fairless Hills Pa. 19030

215-736-8055

servicedepartmentprolinemusic@comcast.net

prolinemusic@comcast.net

www.prolinemusic.com

Jul 15, 2011 | M-Audio SBX10 Monitor Studio Sub

1 Answer

I have a peavey 1220 powered mixer and I'm trying to hook up to two sp15's top's and 2 18; peavey subs for my band and I can't get the bass seperated so it's out of my tops


Hi. The mixer puts out a full range mix, the solution is in your speaker setup.

Many subs have a built in crossover that splits the signal for the tops. Check your sub specs or manual. If your subs have this, run your output signal to them first and then link them to the tops from the special daisychain socket.

If they don't have one, you can install a passive crossover to your subs or buy an external crossover unit.

The last (and not very good) option is to fake a crossover with the desk's stereo EQ. Connect the subs to the left or right channel and the tops to the other and use the EQ to remove the bass from the tops and vice versa, pan everything dead center. Obviously this sacrifices your stereo sound and isn't brilliant.

Jun 29, 2011 | Peavey XR 1220 Powered Mixer Mixer Powered

2 Answers

The amplifier keeps burning the tweeters in the speakers after replacement


Please check the wattage of the replaced speakers, now check the cross over in the speakers, if the capacitors are short the voltage might flow into the tweeter coils to burnt them out. Also you can try and reduce the high frequency and also see if the tweeters heat up . If so use high wattage super cooled tweeters.
Check finally for fault in the amplifier output- high voltage/current.

May 12, 2011 | Peavey Pv 2600 Power Amplifier

1 Answer

Need to find out which is the proper speaker wires for hook up yellow to tweeter or sub? And striped one is positive or negative?


You can probably trace which colors go to the smaller of the amps... Yellow is often used for tweeter but there really is no standard. Striped wire is probably the minus lead. If a pair is heavier, that would be the pair for the woofer... and red is often positive for woofer and black the minus. Searching the Mackie schematics doesn't really show colors. You could call their service dept.

Dec 14, 2010 | Mackie Th15a Power Speaker Pair 15 Two Way...

1 Answer

Replace High Frequency Transducer (Tweeter) on


You should order an exact replacement from Mackie since this is a reference monitor.

Consider putting a limiter or fuse in series to protect the speakers if this was due to overdriving it.

Sep 20, 2009 | Mackie MR5 MR5 Reference Monitor

Not finding what you are looking for?
Mackie MR5 MR5 Reference Monitor Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mackie Music Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Vito Vacirca Jr.

Level 2 Expert

140 Answers

Lawrence Nentwig
Lawrence Nentwig

Level 1 Expert

8 Answers

Are you a Mackie Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...