Question about Televison & Video

2 Answers

The light above the power switch on my Zenith Z42PJ240 was blinking red. What does that mean?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The Zenith Z42PJ240 we have turns off with the remote but will not do the following with the remote (we have switched batteries): when the channel up/down is pressed it does not go up/down one channel it goes through all and will not stop, cannot switch between components also does the scan thing, we can do all functions on the tv itself...change channels ect... is this issue the remote or the remote sensor on the tv?

Posted on May 14, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 233 Answers

Means you have a fryed chip board in the tv, time to buy new, good luck

Posted on Dec 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zenith z52sz80 comes on, has no light above lamp. Tv shuts off and red light flashes 9 times


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty...

Dec 16, 2016 | Zenith Televison & Video

1 Answer

Hi. I have a Zenith Plasma TV Model:Z42PJ240-UB. I power on the TV with my external DVD attached via RCA Connectors. I can hear the sound coming from the TV but I have a blank or black screen.


Yellow is the video connector.. if you don't have a yellow connection on the TV, try the red, green and blue till you find one that works. You might also need to change the input to get it to work.

Mar 29, 2016 | RCA Televison & Video

1 Answer

What might the problem be on a zenith tv


video control board remove back panel and look for bad capacitors

Mar 25, 2015 | LG Z42PJ240 42 in. Zenith Plasma TV

1 Answer

I have a Z42PJ240 42 in. Zenith Plasma television I canno.v.t find anywhere to manually power on the t


hi the power button might be underneath the tv or a touch screen panel

regards
shaun

Apr 21, 2014 | LG Z42PJ240 42 in. Zenith Plasma TV

1 Answer

Runco flat panel tv displays solid green then blinking red light. What doe this mean?


How many times this standby/power light blinks at one time switch ON? Count it carefully. These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/

Nov 14, 2013 | Runco Televison & Video

3 Answers

The LED flashes, but the lights won't come on. Do I need to install a light shield. The sensor is mounted in a well shaded area 10 to 12 feet above ground. There are landscape lights beneath the sensor are...


There are settings on the sensor itself. Should be a dusk to dawn setting that will keep it off during those times and then function at night. as far as not working I would first suggest setting the sensitivity. Disrupting to power could have reset this.

Oct 15, 2013 | Heath Zenith Heath/Zenith SL-5411-WH Heath...

1 Answer

The picture gradually goes light than dark all the time zenith Z42PJ240 plasma tv


Go into your user menu and turn off your eco settings. There is an ambient light sensor that is monitoring the light in your room and is constantly adjusting your brightness. Just go in and turn it off and all will be well.

Apr 05, 2011 | Televison & Video

1 Answer

Zenith z44sz80


the light next to the power light is the lamp indicator when it blinks red it means there is a problem with the lamp . if its orange it means its getting close to the end of its life span.let me know if you need anything further .

Apr 13, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73635 Answers

Cindy Wells

Level 3 Expert

5056 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...