I need UL and NSF certification proof for Hoshizaki KM-900 MAF Ice maker. Can please provide?

that could be a number of problems..is it making any beeps or flashing lights on the circuit board? Have you tried to reset the circuit boards reset button with the machine on. ? If the machine seems totally dead then the bin thermostat is most likely the problem..

A few simple things to check is the condenser for dust. Blow it out. If their is a water filter going into the unit change it. Get some ice machine cleaner and follow directions. Do these things before calling anyone out.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Video Ice machine repair


Tech sheet

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hoshizaki is the bhest ice machine on the market, what can i do for you.

you can replace the housing only, Check with your local Hoshi supplier for parts. Start there as a new pump is very pricy.

Hoshizaki America, Incorporated
618 Hwy 74 South Peachtree City, GA 30269
1-800-438-6087

Do you hear the machine cycling like normal but just not dropping? Could be the hot gas solenoid. If you never hear it trying to drop that could be anything from a dirty condenser to dirty plates to bad ice thickness control. Run some ice machine cleaner through it and blow the condenser out.


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

km-450mwb hoshizaki problem is machine strate is ok but to long time ice making , not dropping, two beeps every three seconds what problem i don't no pleas help mi

Update on the above! The water does shut off, but when the water is running it runs and splashes for awhile down all over the ice thats in there. Water bill is very high when it is in use.