It is looking for a password (WiFi Network
Key) You have to double click on the little computer icon down in the
right tool bar area, the one with the two side radiating arcs, and
possibly has a small red X under it. The red X indicates that it is NOT
connected. When you double click on that icon a window called RT28701
opens up, then you click on Wireless Information tab, then you cursor
down to the name of your WiFi
and high light it and click the connect box. Then another window opens
up called Network Properties. Uncheck "The key is provided
automatically" box. This will allow you to type in your "Network Key",
the password that protects your network from outsiders. This "KEY" was
set up when you installed the router on your server computer. If this
does not work at first, turn the machine over on it's back and using a
toothpick, insert it into the little hole about an inch diagonally from
the right corner of the data plate, this will re-load a new copy of
everything including the WiFi RT28701 driver.
sometimes this driver gets confused. See my TIP at: http://www.fixya.com/support/r7350901-fix_synet07526_wifi_flashing
170 views
Usually answered in minutes!
×