Question about Computers & Internet

1 Answer

Will not do anything stuck in settings area page three not a problem with my router it is with the amazonkindle reader will not advance or go to menu

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 62 Answers

  1. Unplug Kindle from power adapter or computer.
  2. Slide and release the power button. The LED light that surrounds the power button will display green for two seconds.
  3. Shut down Kindle by sliding and holding the power button for five seconds. The LED light will blink three times. Wait for the screen to go blank, then release the power button.
  4. Turn on the Kindle by sliding and releasing the power button.
  5. If Kindle is still not working, you can perform a hard reset by sliding and holding the power button for 15 seconds.
  6. If Kindle is still unresponsive, try charging Kindle before trying to restart the device once again.
  7. Make sure you have the latest software version available installed on your Kindle. The latest version is available here: www.amazon.com/kindlesoftwareupdates

Posted on Dec 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost my charger for old "amazonkindle". Need advice re correct replacement. Model D00111. Has bottom keyboard, side tabs, and R side channel w roller button. Back power, bottom volume control.


We do not sell remotes or anything else for that matter. Contact Amazon for a replacement they would be the only source I can think of.

Jun 28, 2017 | Tablets & eReaders

1 Answer

How do I forward a port on my 2wire970 router.


The sad answer is that you really can't forward a port on 2wire equipment. Since the hardware is provided by the ISP they only give you basic settings (security keys, firewall etc). There are advance features you can hack into (http://www.mydigitallife.info/2007/04/29/advanced-configuration-page-for-2wire-homeportal-residential-router-gateways-singtel-mio/) but I wouldn't recommend it. If you do the advanced settings and mess anything up they may charge you for the router or cancel your service. The easiest solution is to get a personal router that supports port forwarding and just connect it to the 2wire router you already have or just replace it with the ISP (if it's a wireless router) for a normal box.

Apr 03, 2011 | 2wire (1000-400108-001) Router

1 Answer

My nat type is 3 and restricts my gaming experiance how do i fix this problem


1) Type in "192.168.1.1" into the address bar of your browser. The log in page for your browser appears. 2) Enter your password - by default this is "1234", but you might have changed it. If you have changed it before log in with that new one.
A page should load with a lots of information. On the left side there should be a panel of stuff, what you want is "advanced settings". If advanced settings IS there on the left go to step "a" below. If advanced settings (or in fact anything) IS NOT down the left proceed to step "b" below.
a) Happy days. All you have to do is click the "+" beside advanced settings to expand it, then select UPnP. Then just click ALL of the boxes (there's 3 of them I think). That's it.
b) You are logged into some sort of stupid mode where you can't change anything. All you can do is refresh the page or log out. This is probably because you entered "1234" as the password, but in fact this password has previously been changed by you or someone else. So go back to the log in screen (192.168.1.1 in the address bar) and put in the one you changed it to, if you can remember it. If you do remember it and log in successfully (successfully being that you can see "advanced settings" on the left), go back to step "a" above. If you still can't get to that page it means you don't know your password. So you're going to have to reset your router. Go to step "c".
c) Resetting your router. Turn the router off. Then hold the reset button for 30 seconds and power on the router at the same time. Now I think you'll have to set up your router again like when you got if first, to connect to the internet, so do it. Then log in to 192.168.1.1 again. This time the password "1234" should bring you to the proper screen with advanced settings. If it does go to step "a". If it doesn't go to step "d".
d) You'll have to default reset your router. Turn it off. Turn it on and hold reset for 15 seconds. Some light will flash. Release button and let it reboot. Now log in to 192.168.1.1 again. If it works and you can select "advanced settings" go to step"a". If you STILL can't see advanced settings you're at the end of the line and I don't know what to do. Contact your provider or something.
If you haven't done this already...on your ps3: Open up network >> internet connection. Choose wireless/wired - whichever you want. Choose "Address settings" - "custom", "IP address" - choose manual.Enter these:
IP address - "192.168.1.50" Subnet Mask - "255.255.255.0" Default Router - "192.168.1.1" Primary DNS and Secondary DNS same as default router.
Then enter than. Don't know what MTU is (it'll come up next). You're done.

Mar 07, 2011 | Zyxel P660HW-D1 Router

1 Answer

I need to de_militarised (DMZ) my router for my ps3 so im able to connect with my madden league game players


1) Type in "192.168.1.1" into the address bar of your browser. The log in page for your browser appears.
2) Enter your password - by default this is "1234", but you might have changed it. If you have changed it before log in with that new one.

A page should load with a lots of boring information. On the left side there should be a panel of stuff, what you want is "advanced settings". If advanced settings IS there on the left go to step "a" below. If advanced settings (or in fact anything) IS NOT down the left proceed to step "b" below.

a) Happy days. All you have to do is click the "+" beside advanced settings to expand it, then select UPnP. Then just click ALL of the boxes (there's 3 of them I think). That's it.

b) You are logged into some sort of stupid mode where you can't change anything. All you can do is refresh the page or log out. This is probably because you entered "1234" as the password, but in fact this password has previously been changed by you or someone else. So go back to the log in screen (192.168.1.1 in the address bar) and put in the one you changed it to, if you can remember it. If you do remember it and log in successfully (successfully being that you can see "advanced settings" on the left), go back to step "a" above. If you still can't get to that page it means you don't know your password. So you're going to have to reset your router. Go to step "c".

c) Resetting your router. Turn the router off. Then hold the reset button for 30 seconds and power on the router at the same time. Now I think you'll have to set up your router again like when you got if first, to connect to the internet, so do it. Then log in to 192.168.1.1 again. This time the password "1234" should bring you to the proper screen with advanced settings. If it does go to step "a". If it doesn't go to step "d".

d) You'll have to default reset your router. Turn it off. Turn it on and hold reset for 15 seconds. Some light will flash. Release button and let it reboot. Now log in to 192.168.1.1 again. If it works and you can select "advanced settings" go to step"a". If you STILL can't see advanced settings you're at the end of the line and I don't know what to do. Contact your provider or something.

If you haven't done this already...on your ps3:
Open up network >> internet connection. Choose wireless/wired - whichever you want. Choose "Address settings" - "custom", "IP address" - choose manual.Enter these:

IP address - "192.168.1.50"
Subnet Mask - "255.255.255.0"
Default Router - "192.168.1.1"
Primary DNS and Secondary DNS same as default router.

Then enter than. Don't know what MTU is (it'll come up next). You're done.

Mar 02, 2011 | Zyxel P660HW-D1 Router

1 Answer

I have a Belkin wireless G Router and have just purchased a Linksys Wireless-N USB Adaptor WUSB300N. Currently my new desktop fails to recognise the Belkin Router with or without the adaptor. Does the...


Connection and signal strength depends upon the router. Just go through the settings on the wireless router, try changing the wireless channels.And also change the wireless mode on the router to 802.11g.This should be the compatible mode for your wireless adapter. to do this first connect the router with the help of an ethernet cable .Please follow the below steps:
1)Using your Internet browser, you can access the Router’s Web-Based
Advanced User Interface. In your browser, type “192.168.2.1” (you do
not need to type in anything else such as “http://” or “www”). Then
press the “Enter” key.
2)
You will see the Router’s home page in your browser window. The
home page is visible to any user who wants to see it. To make any
changes to the Router’s settings, you have to log in. Clicking the
“Login” button or clicking on any one of the links on the home page
will take you to the login screen. The Router ships with no password
entered. In the login screen, leave the password blank and click the
“Submit” button to log in.
3)
Clicking on the header of the “Wireless” tab will take you to the
“Wireless” header page. From this page, the Router’s wireless radio
can be enabled or disabled (the default setting is enabled). Under the
“Wireless” tab, there are links that allow you to make changes to the
wireless network settings.
4)
Your Router can operate in three different wireless modes:
“g and b”, “g only”, and “b only”.
5)
Change the wireless channel to 9 or 11
Click on save changes once you have done this
This should work,if it doesnt work let us know the exact problem in detail.

May 18, 2009 | Linksys WUSB300N Wireless Adapter

1 Answer

Firewall enabling on DI-524


Here is the link to the D-link DI-524 manual
its is in PDF format so please have adobe acrobat reader installed

I have the same exact router and this router has default firewall settings enabled. You must go under Advanced tab and then click firewall, in this area you can add your own firewall policy's.

Hope this helps
Please rate my solution, thanks

May 06, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Nat3 chanche to nat 2


Yeah I had this problem but she's fixed. No need to upgrade the firmware me thinks.

1) Type in "192.168.1.1" into the address bar of your browser. The log in page for your browser appears.
2) Enter your password - by default this is "1234", but you might have changed it. If you have changed it before log in with that new one.

A page should load with a lots of boring information. On the left side there should be a panel of stuff, what you want is "advanced settings". If advanced settings IS there on the left go to step "a" below. If advanced settings (or in fact anything) IS NOT down the left proceed to step "b" below.

a) Happy days. All you have to do is click the "+" beside advanced settings to expand it, then select UPnP. Then just click ALL of the boxes (there's 3 of them I think). That's it.

b) You are logged into some sort of stupid mode where you can't change anything. All you can do is refresh the page or log out. This is probably because you entered "1234" as the password, but in fact this password has previously been changed by you or someone else. So go back to the log in screen (192.168.1.1 in the address bar) and put in the one you changed it to, if you can remember it. If you do remember it and log in successfully (successfully being that you can see "advanced settings" on the left), go back to step "a" above. If you still can't get to that page it means you don't know your password. So you're going to have to reset your router. Go to step "c".

c) Resetting your router. Turn the router off. Then hold the reset button for 30 seconds and power on the router at the same time. Now I think you'll have to set up your router again like when you got if first, to connect to the internet, so do it. Then log in to 192.168.1.1 again. This time the password "1234" should bring you to the proper screen with advanced settings. If it does go to step "a". If it doesn't go to step "d".

d) You'll have to default reset your router. Turn it off. Turn it on and hold reset for 15 seconds. Some light will flash. Release button and let it reboot. Now log in to 192.168.1.1 again. If it works and you can select "advanced settings" go to step"a". If you STILL can't see advanced settings you're at the end of the line and I don't know what to do. Contact your provider or something.

If you haven't done this already...on your ps3 (or similar on xbox):
Open up network >> internet connection. Choose wireless/wired - whichever you want. Choose "Address settings" - "custom", "IP address" - choose manual.Enter these:

IP address - "192.168.1.50"
Subnet Mask - "255.255.255.0"
Default Router - "192.168.1.1"
Primary DNS and Secondary DNS same as default router.

Then enter than. Don't know what MTU is (it'll come up next). You're done.


Jan 26, 2009 | Zyxel P660HW-D1 Router

2 Answers

HOW DO I INSTALL MY ROUTER TO WINDOW VISTA


reset your wireless router. How press the reset button with a pen for 10 secs with the power on.

then connect it to the modem. then on the windows connections connect it. let me know if you need help

Aug 08, 2008 | Belkin (F5D7230-4) Router (587009)

1 Answer

REconfiguration of belkin router


Sure, you have two options;
  1. The easiest way to install the router is to run the "Install Wizard Software" that was shipped with your router. You can download the software from the Belkin Support website: http://www.belkin.com/support/article/?lid=en&pid=F5D7230-4&aid=5096&scid=221
  2. Or using your Internet browser, you can access the Router’s Web-Based Advanced User Interface. In your browser, type “192.168.2.1” (you do not need to type in anything else such as “http://” or “www”). Then press the “Enter” key.

    The Router ships with no password configured. In the login screen, leave the password blank and click the “Submit” button to log in.

    The router's home page is the first page you will see. The home page shows you a quick view of the Router’s status and settings. All advanced setup pages can be reached from this page.
Good Luck!

Aug 02, 2008 | Belkin (F5D7230-4) Router (587009)

1 Answer

HOW TO RENAME MY BELKIN ROUTER


Using the WEB BASED INTERFACE.
Using your Internet browser, you can access the Router’s Web-Based
Advanced User Interface. In your browser, type “192.168.2.1” (do
not type in anything else such as “http://” or “www”) then press the
“Enter” key.
You will see the Router’s home page in your browser window.
Clicking on the header of the “Wireless” tab will take you to the
“Wireless” header page. From this page, the Router’s wireless radio
can be enabled or disabled (the default setting is enabled). Under the
“Wireless” tab, there are links that allow you to make changes to the
wireless network settings.

Changing the Wireless Network Name (SSID)
To identify your wireless network, a name called the SSID (Service
Set Identifier) is used. The default SSID of the Router is “belkin54g”.
You can change this to anything you want to or you can leave it
unchanged. If there are other wireless networks operating in your
area, you will want to make sure that your SSID is unique (does not match that of another wireless network in the area). To change the SSID, type in the SSID that you want to use in the “SSID” field (1) and click “Apply Changes”
(2). The change is immediate. If you make a change to the SSID, your wireless-equipped computers may also need to be reconfigured to connect to your new network name. Refer to the documentation of your wireless network adapter for information on making this change.

Apr 22, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...