Question about Kodak EasyShare LS753 Digital Camera

1 Answer

I have a camera and it comes on and stuff but it keeps saying error #E45? How can i fix that right away?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Posted on Jan 16, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error message E45 comes up on camera - What can I do to fix it? Kodak easyshare V610. Message comes up when camera turned on. Batttery charged etc.


Is the lens extended? If so, try hitting the lens a couple of times with the palm of your hand and then turning off the camera. Turn it back on and let me know what happens. Sounds crazy I know, but those things are notorious for that error and that problem. You can also try taking out the SD card and see if the error goes away. Let me know what happens. Thanks.

Jeff

Nov 23, 2010 | Kodak EasyShare V610 Digital Camera

1 Answer

Camera locked - camera error #E45


Hi

www.Kodak.com says:
"E45" appears on your camera's display when your camera requires service or repair.

I think it is a lens error. They have a page on www.kodak.com called Step-by-Step Solutions and Repair. This is for USA only.
See what they suggest.

I may be cheaper just to get a new camera.

Hope this helps.

Feb 21, 2010 | Kodak EasyShare LS753 Digital Camera

1 Answer

When i swich on it says camera error ''E45 see users guide.


E45 error code indicates the lens of your camera is already defectived. You need to contact Kodak at 1 800 235 6325 ext 12. Your camera needs repair

Feb 03, 2010 | Kodak EasyShare Z700 Digital Camera

1 Answer

I have kodak ls443 get error message camera error e45 and it says see users guide. i have looked in users guide but cannot find andy info re error e45


Hello

Firstly, at the link below you can download a updated softcopy of the manual for free.

http://www.retrevo.com/s/Kodak-LS443-Digital-Cameras-review-manual/id/200dj378/t/1-2/

As for the error code you are getting, "error 45" is a lens related problem of LS443.

If the lens is not stuck, you may try to download the firmware from the Kodak site and update the one in your camera.

As the lens is already stuck, there is no choice except to send the camera back to Kodak for servicing.

Hope this can steer you in the right direction.

Kind regards
Andrea

Dec 23, 2009 | Kodak EasyShare LS443 Digital Camera

1 Answer

#e45 camera errot comes up on my v530 camera.


Hello.
Welcome to Fixya.

I have a Kodak CX6330 and I was getting error E45 as well - once the lens had gone out, it wouldn't go back in and close upon switching off the camera.

I opened up the camera (if you can't find a screwdriver tiny enough, use a simple utility knife! you can break off the tip a little bit and it fits) ..then I CLEANED the circular metal contact surface under the selection dial carefully.
ALSO, what I think was the main problem, was that one of the four contact plates (right underneath the selection dial), was bent backwards a bit. So I used a tiny pincette from a swiss pocket knife to fix it. And that was it, then I put the cover and batteries back, switched the camera on and it worked fine, no error E45 anymore, YAY!
That’s it from me, hope it works for you too.

greetings^^

Nov 02, 2009 | Kodak EasyShare One Digital Camera

1 Answer

My camera kodak easy share v530 has error e45 the zoom doesnt go in when i turn it off. when i turn it on it says error e45


E45 means it has a lens error., the gear of the lens is already defective you need to call precision camera for repair toll free 1 800 665 6515

Nov 01, 2009 | Cameras

1 Answer

Kodak digital camera V705 -error 45


Hi!
E45 means that a focus error occurred or the MCU BOARD malfunctioned. I'm afraid you will have to give it away for a repair. It's a hardware problem. You should contact your local Kodak service center.

Tom

Aug 01, 2009 | Kodak EasyShare V705 Digital Camera

2 Answers

Screen says error#e45


mine says the same thing can anyone help? manzanero26 is my y

Jun 04, 2008 | Kodak EasyShare LS753 Digital Camera

3 Answers

Error code E45


can u help me with my camera. its a kodak LS 443. I keep getting a saying that is has a error # E45. the lens are stuck. Can u tell me wat do do or give me advice please

Nov 20, 2007 | Kodak EasyShare LS443 Digital Camera

Not finding what you are looking for?
Kodak EasyShare LS753 Digital Camera Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...