Question about Televison & Video
I'm trying to program a universal remote to work with a ViewSonic LCD TV/Monitor model VS 11265-1M. The remote is a Trisonic TS-RC488. Works with other TV's. It will not learn the code from this TV. Any idea of what codes will work???
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Trisonic TS-RC488
I HAVE A TRISONIC TS-RC488 AND LOST THE PAPER THAT WAS INSIDE THE REMOTE , THE INSTRUCTIONS CAN ANYONE TELL ME THE CODE FOR A SONY TV AND THE INSTRUCTIONS OF HOW TO SET UP THE UNIVERSAL TRISONIC ,,,, THANKS ,,,,, SINCERELY JOHN
Posted on Jul 26, 2008
SOURCE: trisonic ts-rc488
OK EVERYONE I FOUND ALL YOUR ANSWERS , IM JOHN FROM NEW JERSEY JAC1NJ@AOL.COM , FOR THE TRISONIC UNIVERSAL REMOTE CONTROL , TC-RC488 AND MAYBE OTHERS , INSTEAD OF THE CODES THIS IS EASIER,TURN ON THE TV OR VCR ETC. FOR THE POWER MUST BE ON WHILE DOING THIS PROCEDURE , PRESS THE YELLOW SET UP BUTTON AND THE DEVICE KEY U WANT SUCH AS TV1 OR VCR1 AND HOLD THEM BOTH DOWN UNTIL THE RED LIGHT ON UR REMOTE STAYS ON THEN IMMEDIATELY AFTER HIT THE YELLOW SETUP BUTTON AGAIN UNTIL UR RED LIGHT STARTS BLINKING THEN POINT THE REMOTE AT YOUR TV OR VCR AND KEEP HITTING THE RED POWER BUTTON AS THEN YOUR REMOTE IS TRYING TO FIND A CODE AND WILL EVENTUALLY FIND A CODE , AND YOUR TV OR VCR WILL SHUT OFF , THEN THE RED LIGHT WILL BLINK LET IT BLINK UNTIL IT GOES TOTALLY OFF, THEN HIT THE POWER BUTTON AND YOUR REMOTE SHOULD WORK , SOMETIMES YOU HAVE TO HIT THE DEVICE KEY AND YELLOW SETUP KEY SEPARTELY AND THEN THE RED POWER BUTTON, I CALLED TRISONIC AND ACTUALLY HE HELPED ME AND I HELPED HIM , HE SAID I SHOULD WORK FOR TRISONIC , THIS IS A QUICK SEARCH , NOT REQUIRING ANY CODE NUMBERS, HOPE I HELPED YOU ALL SINCERELY , JOHN A.CLINE , CHECK OUT MY LIST OF LYRIC BOOKS AND MUSIC AT WORDCLAY.COM BYE!!!!!!!!!!!!!!!!
Posted on Jul 28, 2008
SOURCE: Codes List for my RC
you can try this one...109 only one listed....
A: power on the device you want to controll
B:press and hold the (set) keyand press the device key at the same time..
C:the LED will light at that moment then release the pressed keys..
D:PRESS THE SET KEY AGAIN THEN RELEASE IT. THE REMOTE ENTERS THE QUICK SEARCH MODE AND THE LED KEEPS FLASHING...
E:Point the remote at the device,then press the power key.see if it reacts
Posted on Feb 03, 2009
Tips for a great answer:
Oct 30, 2011 | ViewSonic N3251w 32 in. LCD HDTV
Basic LCD monitor and TV troubleshooting guide:
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.
Apr 13, 2011 | ViewSonic VX900 19" LCD Monitor
Aug 02, 2010 | ViewSonic N3251w 32 in. LCD HDTV
Jun 09, 2010 | ViewSonic PRJ-RMC-002 Remote Control
May 30, 2010 | ViewSonic N2060w 20 in. LCD Television
Apr 09, 2010 | ViewSonic PRJ-RMC-002 Remote Control
Jul 13, 2009 | One For All URC-4605 Remote Control
Dec 17, 2017 | ViewSonic N3251w 32 in. LCD HDTV
Dec 16, 2007 | ViewSonic N2750w 27 in. HD-Ready LCD...
264 people viewed this question
Usually answered in minutes!