Question about Canon PowerShot S3 IS Digital Camera

1 Answer

Where is the reset button on the powershot s3 IS

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 4,738 Answers

"Lens error, "Restart" camera", means to try turning the camera off and on to see if that corrects the problem. Unfortunately, it rarely does.
Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ... Many cameras that fall prey to this can only be corrected by professional repair. But, here are some things that you can do that may correct it. They only seem to work for less than 40% of the lens errors, but if the camera is out of warranty, they're worth a try.

Posted on Dec 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why can I not get my Canon PowerShot S3 IS to switch to the PLAY mode?


Search Results

    [PDF]Manual

    gdlp01.c-wss.com/gds/3/0900001323/01/PSS3ISCUGba-EN.pdf
    Avoid dropping or subjecting the camera to severe impacts. Do not ... 2006 CANONINC. ... When switching between shooting and ... The camera switches to Playbackmode, but the lens does not retract ..... Play/Print/Set up/ My Camera Menus.

    Canon S3 IS Review: Full Review - Operation

    www.imaging-resource.com/PRODS/S3IS/S3ISA3.HTM
    Record Mode LCD Display: In Record mode, the PowerShot S3 IS's LCD reports ...Unlike its behavior in Record mode, the Display button will not let you view ... switchwith the red camera icon, this mode sets up the Canon PowerShot S3 IS ... exposure setting you've chosen if the camera can't get a good exposure with it.

    [PDF]Download

    galeria-zdjec.pl/ksiazki/instrukcje/Canon/canon_pss3_eng.pdf
    Shoot movies in any mode by pressing the movie button ... with My Colors ... caused by the malfunction of non-genuine Canon accessories (e.g., ... warranty does not apply to repairs arising out of the malfunction of .... Switching between Metering Modes . .....Do not get the camera caught on other objects or subject it to.

    How to give your low-end Canon digital camera RAW support

    archive09.linux.com/feature/118946

    Linux.com

Jan 24, 2016 | Canon PowerShot S3 IS Digital Camera

2 Answers

Trying to find an INSTRUCTION MANUAL for the Canon Powershot S3 IS Camera. Cannot find one anywhwere.....Can you help?


http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_g_series/powershot_s3_is#BrochuresAndManuals

Aug 30, 2010 | Canon PowerShot S3 IS Digital Camera

1 Answer

Problems with macro close ups


First make sure the lens is clean. Now set the dial to P mode. Hold down the flower button for a few seconds and the camera will go into "super macro" mode - keep watching the screen or the viewfinder until this happens. You might also feel the zoom resetting itself. You can now go right up to the subject, literally almost touching it - be careful not to damage the lens by hitting the subject! I think in normal macro mode 4" is too close.

May 05, 2010 | Canon PowerShot S3 IS Digital Camera

1 Answer

Canon PowerShot S3 Is


The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to print your pictures. Depending on the program and printer you may print the date on the image, in the margins, or on the back.

Feb 20, 2010 | Canon PowerShot S3 IS Digital Camera

2 Answers

Hard Time Turning On


Hi,

For viewing you must turn to the right, it means your switch for record on is defective.
Your Canon repaircenter can fix this for you, if not contact Rotronica in the Netherlands for repair.

Apr 19, 2009 | Canon PowerShot S3 IS Digital Camera

1 Answer

Powershot s3 is


clean off all fo your contacts on the inside and the battery door, even try puling up on the connectors so that they get a good connection

Mar 11, 2008 | Canon PowerShot S3 IS Digital Camera

Not finding what you are looking for?
Canon PowerShot S3 IS Digital Camera Logo

Related Topics:

859 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

169 Answers

old marine
old marine

Level 3 Expert

1983 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...