Question about KitchenAid KPES100PM Espresso Machine

Open Question

My steamer don't work anymore. It's only responding with a small click and nothing happens. Is there a fuse or anything that might have been burned off?

Posted by on

  • gunnar392 Dec 30, 2010

    Thanks for the manual - but it does not say anything about my specific problem with the steamer.
    The problem must be inside the steamer kettle or a inside fuse or something alike.
    G/

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

47lx6500 buttons on tv don,t respond. Cannot switch of the television


touch button module isdead ir module also attached to the same board so replacing it might solve both of your problems

Jul 05, 2014 | LG 47LX6500 47-Inch 3D 1080p 240 Hz LED...

1 Answer

Fuse burn out all the time. Interior light, door locks, trunck relese and radio.


Check what circuits are connected around this fuse, then check each one, test voltage and wire connections.

Good luck.

Jan 03, 2014 | Chrysler Concorde Cars & Trucks

1 Answer

Touchscreen wont work, and it wont mount my SD card anymore. One day they both just stopped working no water damage or anything.


The SD card is probably bad, had the same thing happen to a card on my phone, the phone we just rpeatly try and mount it. You can try connecting it to a computer. Right click on computer > manage > Disk Management if the card is detected here right click on it and format it, you have a corrupted file system. If it isn't detected at all the the card is trash. As for the digitizer(touch sensor) these can be replaced although they tend to cost $100+ and you usually need to replace the front glass cover, as they are usually fused together. ifixit.com sells a lot of parts as well as full picture guides for many devices.

Dec 07, 2013 | Straight Talk LG Optimus Zip Cell Phone

1 Answer

Just bought a pair of used Beringers Truth b2031a monitors. one of which doesnt work anymore at all... opened the back of it (took those 6 screws out) and saw that the power connection has been cut of......


Here is the service manual schematics for your speakers:

http://elektrotanya.com/behringer_b2031.pdf/download.html

Scroll doen to "get manual" and click on it to download the manual... Do not click on the other downloads at the site, they are for viewers you don't need.

Take the schematics to a COMPETENT electronic service technician to get units repaired. You obviously bought units that had been hacked before...

Jun 21, 2011 | Behringer Truth B2031a 225-watt Powered...

1 Answer

Phillips dvd drive/cd burner does not burn cds


Might be the regestry, errors can accure throught the reg, nothing you did it just happens. Try this and see, "Start" "Run" type in "regedit" then ok in the left field click on the "+" next to Hkey_Local_Machine" + next to "System" + next to :CrurrentControlSet" + next to " Control" + next to "Class" then click on " {4D36E965-E325-11CE-BFC1-08002BE10317} " in the right fild click on "Upper Filters" then "delete" now "Lower Filters" then "Delete" restart pc. Hope this is helpfull.

Jun 22, 2009 | Computers & Internet

1 Answer

Francis francis milk steamer not operating


Steamer tubes can get plugged up with dried milk and/or calified water deposits in the tube.
With the machine unplugged, turn the tube up to check it, Clean it with a small guage wire.
Soak it in a small cup of vinegar, if needed.
Further cleaning, you can add a bit of vinegar to the water and steam it thru...
Let me know how it goes.
K

Jun 03, 2009 | FrancisFrancis! X1 - Stainless Steel...

3 Answers

Cigarette lighter plug not working


hopefully nothing serious. if you can, make sure your wires did not burned or got too hot.Visually inspect them. Then, if you have a voltmeter check to see if you getiing power to it. no voltmeter? Go to your nearest auto parts store and ask for a test light. Back to the lighter, if you have power on the wires or wires leading to the back of the lighter, more than like it you lighter burned out.  No power on the wires? make sure wire did not get fryed or burned, all wires look good? check fuses again.  worst case scenario, can't find problem ? you can run another wire from your fuse box to the lighter. 

May 13, 2009 | 1994 Toyota Celica

1 Answer

Whirlpool microwave does not switch on - no power


A problem with a door switch or door switch mount (like this one) will cause the fuse to blow when the door is opened or closed.

There may be a second fuse inside.

You also need to check the door switches and latches to be sure all the debris is out.

There is often a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting & testing.


Sep 01, 2008 | Microwave Ovens

Not finding what you are looking for?
KitchenAid KPES100PM Espresso Machine Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Coffee Makers & Espresso Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

graybeard32301

Level 3 Expert

352 Answers

Ismael Rodriguez...

Level 2 Expert

171 Answers

Are you a KitchenAid Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...