Question about Kenmore Kitchen Ranges
Tiger.......I have a Kenmore Model 790 as well, and am getting the F10 Error code. It says in the manual that it is either the RTD (Resistance Temperature Detector) or the EOC (Electronic Oven Control), but I am trying to find troubleshooting tips myself, as I do not want to pay $130 for a tech to come to my house. I know you can press the oven (off) button to stop the beeping momentarily, but the manual also says that the oven may need to be reprogrammed.....which is what I'm trying to find how to do. Sorry I couldn't give you a quick fix solution, but I'm am still searching.
Posted on Aug 03, 2010
(F10 only) Check RTD Sensor Probe & replace if necessary.
If oven is overheating, disconnect power. If oven continues to
overheat when the power is reapplied, replace EOC. Severe
overheating may require the entire oven to be replaced should
damage be extensive.
Posted on Feb 04, 2010
Tips for a great answer:
Mar 01, 2015 | Kenmore Kitchen Ranges
Feb 26, 2015 | Kitchen Ranges
Aug 26, 2014 | Kitchen Ranges
Jul 08, 2014 | Kenmore Kitchen Ranges
Nov 12, 2013 | Kenmore Kitchen Ranges
Oct 15, 2012 | Kitchen Ranges
Hello - Typically error code F10 indicates a variety of issues. The range could possibly have a runaway temp (higher than normal temps), shorted keypad, faulty EOC (Electronic Oven Control) or, display wire harness missing/not connected. Usually, these codes mean to replace the EOC. You may be able to reset the range by disconnecting the power to the unit for up to 30 seconds. This will clear most false error codes. You can disconnect power by either unplugging the unit or flipping the circuit breaker off and back on. If resetting the unit proves to be ineffective, I would recommend contacting a professional to move forward accurately.
Oct 02, 2012 | Electrolux EW30DF65GS Dual Fuel (Electric...
Oct 02, 2011 | Kitchen Ranges
Feb 04, 2010 | Kitchen Ranges
871 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: