Question about Samsung HLN5065W 50" Rear Projection HDTV-Ready Television
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It sounds like your rptv lamp is going out. If this is an older DLP this is most likely the cause. You can get a replacement at www.laptopsforless.com part number BP96-00224J for $151. If the tv is still under warranty, I would have them do it, otherwise replace it yourself. If so here is a link to give you step by step instruction. Please give me a good rating. ;-)
Posted on Dec 19, 2007
SOURCE: Samsung Projection TV
You need to take out the DMD bord and open it up then remove the DLP Chip very carefully and blow out under the chip and all the components in the box with dry air something with a dryer on it then reassemble the chip on to the bord and make sure that the three screws that holds the mount that houses the chip are snug then you will need to put the Bord back in and have someone Else watch the pitcher so you can center the pitcher. This happened to me with my samsung tv and ran across this in sum service notes for this problem. Hope this helps
Posted on Jan 02, 2008
There is a problem with the AV2 input. Since this is a new set, return it for repair or exchange. DO NOT open it up as that would void the warranty.
Posted on Jun 05, 2008
Tips for a great answer:
Sep 26, 2017 | Samsung Televison & Video
Mar 13, 2016 | Samsung LN40B610 LCD TV
Oct 20, 2015 | Samsung Televison & Video
Dec 09, 2014 | Samsung Televison & Video
Sep 01, 2014 | Samsung Televison & Video
Nov 05, 2012 | Samsung TXN1430F 14" TV
Nov 02, 2009 | Samsung LA40A450 40 in. LCD TV
229 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: