Question about Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

2 Answers

HI I have a 2 drawer F&P unit. the bottom draw works perfect, the top has not power and no display at all. Please help, Cheers.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 552 Answers

Hello,

Here is a video that explains how to take the drawer out.


">

Posted on Mar 03, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Fisher and P... Master
  • 3,247 Answers

The likely cause of no display lights on top drawer could be either due to the controller failing or the thermal fuse blowing which in turn caused the controller power loss.

It would be easy to check if controller is ok if you are game enough to swap it on the bottom drawer controller. (Do not try the bottom controller on the top drawer as you may loose it)

If controller ok, then it is the ardous task of replacing the heater plate assembly module under the drawer as the thermal fuse is an integral part of it.

Posted on Dec 29, 2010

Testimonial: "thank you, I have something to work with now."

  • winner690 Dec 29, 2010

    thank you so much for the response, I will research on the net a way to disassemble the unit to get to the controller/s and how to disassemble the heater plate and check them. Cheers

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Faulty top drawer on fp dishdraw can I disconnect powet to top unit to disable it


Unfortunately the power is distributed from the inside to the two drawers.
You will have to address the cause of the problem in the top drawer.
If you are good at electric repairs you could disconnect the power from the dishwasher power board itself, but this is not for the faint hearted (no offence). Might be helpful if you can provide a little details about the problem with top drawer. Generally if you are getting F1 message on the panel on bottom drawer and top drawer display is blank (ie no power), then the power board at the base of dishwasher is blown and needs to be replaced. Please clarify model number as the one you provided is for single drawer unit. Make sure the mains power is turned off when you work inside the diswasher.

Feb 05, 2013 | Fisher and Paykel DishDrawer DS605FDSM...

1 Answer

The top drawer will not take in water. The tap symbol flashes. The bottom drawer is working perfectly. I have cleaned and checked it - no obvious obstruction in the drawer.


1 the inlet valve need replacing its bottom of the draw bit tricky to replace it to check it just unclip bottom draw to the side disconect the hose from the inlet top draw valve and turn it on for a sec see if water pumps out make sure you got small bucket if that works finne. 2 its the pump under neath the dish draw thats very tricky took me 1 hour to do

Sep 17, 2010 | Fisher and Paykel 23 in. DD-603SS Built-in...

2 Answers

Top dishwasher drawer will not close


As long as there is no plates or anything stopping it from closeing i will then say that there are 2 side rails that the draw glides in & out on,get down on the floor & check up underneath the draw for smooth gliding operation.also is it possible that a fork or peice of cutlery has gotten over the top & fallen down jambing the draw from closing.

May 29, 2010 | Fisher DD603B / DD603W / DD603H Dishwasher

1 Answer

Hi please help. the top draw in my dd603


The sensor that tells the dishwasher that the drawer is closed may be faulty or dirty. This means the dishwasher thinks the drawer is open and ignores the start command.

You can clean/ replace the sensor at the back of the cabinet. Unfortunately I don't think the service manual gives instructions on location or replacement procedure for parts.

However, you can download the parts manual from Stokes Appliance & spare parts and locate and order the part.

http://www.stokes-aus.com.au/StokesAP/Manufacturer_Info/FP/DISHWASHERS/599084%20Dishdrawer-Version%203%20%20eg%20%20DD603%20etc.pdf
It should be item 5 on page 11.

If you have not taken the drawers out before, the instructions are available at

http://www.fisherpaykel.com/admin/pdfs/pdf_installations/526607O_DD_Install_USw.pdf
on page 7.

good luck.

Jan 13, 2010 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Fisher & Pykal Dual Drawer Dishwasher. Suspect after young child played with control buttoms on top drawer the power won't come on. Bottom Drawer works perfectly. Have tried turning unit off at power...


Press and hold the key or lock button for 5 sec or till you here a beep to unlock. Or till the light goes out above the lock button. You can get your manual here just find your dishwasher.

http://www.fisherpaykel.com/dishwashing/

Good luck and please rate

Sep 16, 2009 | Fisher Dishwashers

2 Answers

Bottom drawer won't clean or drain


My top draw F&P won't drain, it seems to want to go thru the cycle, but then leaves about 3 inches of water. no codes are displaying. No extra beeping. please help!

Jun 30, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

F&P double drawer (DD603) won't empty


Ok you need to remove the motor rotor it's under the spray arm and comes out like a light bulb from the top draw and check for anyting stuck under it or any damage done to it. Try swapping it with the one out of the bottome drawer and see if that works. When you first start the washer does it drain all the water?? if still no luck try swapping the motor contoller modules (computer board) from the top drawer to the bottom drawer and retry both drawers ,if the fault moves drawers with the part, then that part is faulty cheers

Mar 18, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

2 Answers

Fisher and paykel twin draw


I'm not really sure. With the double drawer configuration, I know the top drawer is larger than the bottom drawer. If I had to take a guess, I would say the single drawer might fit in the top of the double drawer.

Jun 26, 2008 | Fisher and Paykel 24 in. DD603H W Built-in...

1 Answer

Top drawer not working


sometimes if the heater is faulty only one drawer will work and the other drawer will flash f1

Nov 02, 2007 | Fisher and Paykel 23 in. DD-603SS Built-in...

4 Answers

Dishwasher not working


disconnet power to unit....circuit breaker...wait 30 minutes....try again

Jun 02, 2007 | Fisher and Paykel 23 in. DD-603SS Built-in...

Not finding what you are looking for?
Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher Logo

788 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dishwashers Experts

Brian Coughlan

Level 2 Expert

275 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Are you a Fisher and Paykel Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...