Question about Remington Health & Beauty

2 Answers

I have a remington F7790, a great razor but the foil head keeps popping up and not sitting right whenever i turn it on. does anyone know why or how to stop this

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Remington Master
  • 1,600 Answers

This problem is because the shaver has not been thoroughly cleaned. There is a build-up of hair particles where the screen snaps onto the shaver which is preventing it from latching into place. Clean it thoroughly and it should be fine

If you are certain that it is thoroughly cleaned and still have problems, your screen is worn and will need replaced. You will find replacements for model F7790 at shaveroutlet.com. See link below

http://shaveroutlet.com/shaver-replacement-parts/remington-sp-390-foil-and-cutter-set.html

Posted on Dec 31, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is another issue/solution I found in an Amazon review. I had same problem and found it was due to build up of dirt at the base of the area where the head clips in, and this stopped the head locating properly. You need to stick something thin down the sides where the head fits in (i used tweezer and then a bent paper clip). Found a load more dirt, scraped this out, and it was good as new. Shame Remington didn't spot this when designing the shaver.

Posted on Aug 15, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is it possible to replace the battery on remington f7790


Yes, open the shaver and try to match the battery, you can usually find direct fits here http://shaveroutlet.com/shaver-replacement-parts/batteries.html Although they are a little expensive as you can do some more research and find them cheaper somewhere else. The thing you need to be careful of is soldering any wires or plates to the new batteries.

Nov 30, 2012 | Remington F7790 Comfort 360 Foil Shaver

2 Answers

The foil of my 5790 razor is damaged. How to I remove the damaged foil?


remington SP390 replacment blades and screen foil for remington f5790 heads replacement parts.

608b5a14-7a71-4356-9dfb-1ecaf5711958.jpg

Aug 22, 2011 | Remington Health & Beauty

1 Answer

The cutter head will not stay on razor, when turned on it pops up will not stay down when clicks in.


This problem is because the shaver has not been thoroughly cleaned. There is a build-up of hair particles where the screen snaps onto the shaver which is preventing it from latching into place. Clean it thoroughly and it should be fine

If you are certain that it is thoroughly cleaned and still have problems, your screen is worn and will need replaced. You will find replacements for model F4790 at shaveroutlet.com. See link below

http://shaveroutlet.com/shaver-replacement-parts/remington-sp-290-foils-and-cutters-set.html

Dec 16, 2010 | Remington F4790 F4790 Pivot and Flex...

2 Answers

Remington es1000


The Remington ES-1000 was probably the best slot-head shaver ever made by Remington. I cannot believe that the market demand was so low as to prompt a cancellation of production. I believe that the production run was limited to about 4 years or so. I have 8 of these shavers and keep a couple old Remington slot heads around as well. The ES-1000 was not perfect. The batteries were way too small and stressed so battery life was poor.You could not buy individual blades as you could with past Remington slot-head units.Also, the edge of the head was too exposed and sharp and when used for body shaving would tend to cut the skin.Slot-head shavers are superior for body shaving and for skin that is suseptible to shaving bumps.They are also great for young men that are prone to ingrown hairs.My guess is that the Norelco 3 head has taken it's place. Those shavers actually use 3 small slot heads. Rumor has it that shavers.com is trying to have a new slot head manufactured in Asia.

Dec 05, 2007 | Remington ES-1000 Electric Shaver

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

634 people viewed this question

Ask a Question

Usually answered in minutes!

Top Remington Health & Beauty Experts

shaveroutlet.com
shaveroutlet.com

Level 3 Expert

1600 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2130 Answers

Are you a Remington Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...