Question about DCS WO-130 Stainless Steel Electric Single Oven

1 Answer

DCS Single Wall Oven Model WO-130-SS

Although the oven is still working, first the temperature display began to disappear, eventually lightning so much that is now unreadable and now the time display is also gone. I'm trying to get a handle on what might cause something like this and if it is worth repairing....ie. an easy fix and too involved. Thanks!

Posted by on

  • Anonymous Jul 14, 2008

    The display on my DCS WO-130ss oven faded but the oven kept on working. Now the oven has stopped working completely. What part do I need to replace? Thanks.

  • nwgardner Jul 17, 2008

    i have the same problem

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Order part #211708 from 1-888-281-5698 DCS Fisher@Paykel new Zealand. Only need philips head screw driver and twenty minutes. This part is a upgrade for lcd only. old part was a three part system, but no need for three parts only lcd screen.

Posted on Jan 08, 2009

  • trbltd Oct 30, 2013

    This part is now unavailable from Fisher Paykel and has to be rebuilt with a minimum 6 day delay to send the part in for them to rebuild it!! Anyone know a parts store that has one in inventory.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DCS WOS-130 oven won't turn off. I've turned the breaker off and back on but each time the oven starts heating without turning it on through the controls.


This sounds like a stuck relay on the control board or in rare cases a short to ground in the oven element itself. Test the oven element terminals to the case. If there is continuity then replace the element. If it checks Ok then more than likely there is a welded relay on the board. you can try tapping the relays on the board. Sometimes this jars the contacts loose and things work again. Be prepared to replace the control if this is the case.

Feb 12, 2014 | DCS WO-130 Stainless Steel Electric Single...

1 Answer

While cleaning oven the door hs remmained locked even after oven has cooled down


Hi,

Seems like you found out the hard way what I wrote about in this tip...

Check it out it also contains some thing to try on how to unlock that oven..

Self Cleaning Oven Problem

heatman101

Asker's Testimonial " Wish I had read this first. I never would have usedthe self cleaning option. Thanks for the info!! " - amymrocks

Oct 13, 2010 | DCS WO-130 Stainless Steel Electric Single...

1 Answer

Need a service manual for wo-127ss DCS single wall oven. need to replace the control board because my display light went out. How do I take it apart?


you can call dcs, they will be happy to send you a manual,
but mostly, this should be pretty simple, three small black phillips heads hold tthe console down, the are above the door when closed
from there the panel should tilt forward and off
becareful they dont leave much room. or very long wires

Oct 13, 2009 | DCS (WOTD-227) Double Oven

8 Answers

Dcs oven display dim - need part #


I just did this same repair...same part number as above (Part #211696 "Electronic Oven Control, Double).
to install you have to remove two screws on the top of the display section of the oven, as well as several screws on the bottom of it, and the screws holding the close pin/temperature probe socket.
Then you can pull off the whole top section (slowly) and remove the two connectors to the existing control unit.
Then release the ribbon cable connected to the control unit on the inside of the top section (press the two small pins inward and slide up the small front section of the black socket to release the ribbon connector.
Unscrew the old control panel, screw in the new one, connect the ribbon, and then reverse removal steps. Easy!

Jul 19, 2009 | DCS (WOTD-227) Double Oven

1 Answer

F2 and beeping sound...what gives? How can I fix? Thanks!


open the cpu and din remove the memory and use the hair brush into the memory housing also applying hair brush into your memory and din put again into original position, and try to on it

Jul 04, 2009 | DCS WO-130 Stainless Steel Electric Single...

2 Answers

Display on our dcs oven is beginning to fade. can i fix it?


Hello just repaired my DCS wall oven. LCD screen is no good. part # lcd only is 211708. cost is $85.00 dollars with shipping. Took me twenty minutes to install. just need one philips head screw driver.Just call DCS Fisher@Paykel 1-888-281-5698 new Zealand.

Oct 03, 2008 | DCS WO-130 Stainless Steel Electric Single...

1 Answer

DCS over F7 error beeping


KEYPAD BUTTONS ARE REMAINING CLOSED FOR MORE THAN 32 SECONDS. REPLACE KEY PAD,DUE TO STERCHED PANEL MEMBRANE

Jul 25, 2008 | DCS WO-130 Stainless Steel Electric Single...

5 Answers

DCS elect wall oven LCD display


Had the same display issue with my DCS WOS-230. The display was fading and made it very hard to read clock and temp setting. Called DCS/Fisher Paykal and was told I need the Control system kit for $335.00 to fix the issue. After reading the input on this issue on this site I pushed them to sell me just the DCS EOC 211696 double display module 100-01095-00. Install took 10 minutes and everything works great. Thanks all for laying the groundwork as DCS will really push hard to sell you the more expensive kit that you do not need.

Jul 17, 2008 | DCS WO-130 Stainless Steel Electric Single...

2 Answers

DCS wall oven F7 ERROR


I TRIED SOLUTION FROM SYMAR DATED MAR 14, 08 IT WORKED FOR NOW. I HOPE IT WILL CONTINUE WORK UNTIL SERVICING...COME MORNING.

Feb 09, 2008 | DCS WO-130 Stainless Steel Electric Single...

Not finding what you are looking for?
DCS WO-130 Stainless Steel Electric Single Oven Logo

1,217 people viewed this question

Ask a Question

Usually answered in minutes!

Top DCS Ovens Experts

ray gallant

Level 3 Expert

40945 Answers

kakima

Level 3 Expert

102366 Answers

Appliance Repair by...
Appliance Repair by...

Level 2 Expert

35 Answers

Are you a DCS Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...