MY PRINTER RECENTLY STARTED TAKING A VERY LONG TIME TO PRINT AND WHEN IT FINALLY STARTS TO PRINT IT PRINTS THE DOCUMENTS IN A SORT OF MIXED UP INCOHERNENT LETTER JUMBLES FOR THE HEADINGS AND SENTENCES. EVERYTHING SEEMS LIKE GIBERIDGE, IF THERE'S SUCH A WORD. THANK YOU FOR UR KIND AND URGENT ASSISTANCE.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When not used for any length of time, ink jet printer print heads will clog with dry ink. You can try to manually clean the printhead with a cloth moistened with water or maybe alcohol until you get some ink on the cloth. Then reinstall and run cleaning cycle. If unsuccessful, new cartridges are needed.
If you are using one printer in the same office, i mean if all the other employers also using it than this problem arises. Because if many employers using it than printer will always print in order of the print commands given. It works as prints given in order by time. If this is not the case than you can try to delete old print commands by switching the printer off and than deleting. I think this must help you.
If my advice helps you please feel free to rate me thanks.
Try to press the photo and copy at the same time it will print a diagnostic page
look how is the quality of the text.
if it prints very light or if it doesnt print open the access door and try to remove the ink cartridges and put it back again and make sure you hear a click sound after you put the cartridges back in and close the printer access door
try to print again a demo page press photo and copy and check if there is improvement
if no improvement open the kodak aio home center software click on the question mark(?) on the upper right corner and click on maintenance..then select printhead cleaning.After the printhead cleaning print again demo page (press photo and copy at the same time) if still no improvement on the quality of the text call the kodak hotline 1 800 421 6699..you might need a printhead replacement..