Question about Computers & Internet
I have a optus pre-paid usb and am wondering how to connect to the internet I have tried several things but still have had no luck
Posted on Jan 19, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 31, 2015 | Tablets & eReaders
Feb 13, 2015 | NetGear Computers & Internet
Aug 14, 2014 | Sierra Wireless Unlocked Telstra 308 4g...
May 14, 2012 | Computers & Internet
Jan 01, 2011 | Microsoft Xbox 360 Elite Console
NOTE: The image may vary depending on the computer and modem you're using.
Once an active Internet connection is established through the modem, connect the modem and the computer to the router by following the instructions below.
Connecting the Devices Together
After ensuring that you have an active Internet connection, connect the modem to the router's Internet port and the computer to any of the four Ethernet ports. For instructions, click here.
After connecting the devices, check the LEDs by following the instructions below.
Checking the Router's LEDs
The Linksys router's front panel will indicate the status of the connection. After connecting the broadband modem to the WAN or Internet port, the computer to an available numbered port and powering on the router check the lights on the front panel of the router. For instructions, click here.
After checking the router's LEDs, configure the router for cable Internet. For instructions, follow the steps below.
Configuring a Linksys Router for a Cable Connection
For Telstra Cable internet users, please contact Telstra to confirm if your internet connection is using DHCP or HB (Heart Beat) signal. There should be no other machine running HB client upon doing this procedure.
Access the router's web-based setup page. For instructions, click here.
NOTE: If you are using Mac to access the router's web-based setup page, click here. If you forgot your IP address, click here. If you forgot your router's password, click here.
When the router's web-based setup page appears, click the drop-down arrow under the Internet Connection Type field and select Automatic Configuration - DHCP.
(a) If you are NOT using Telstra HB, proceed with DHCP setup.
NOTE: If you are a Telstra Cable internet user and you're using WRT120N, WRT160N v1, WRT320N or WRT610N, please select Telstra Cable.
(b) If you are using Telstra Cable, proceed with the following setup. Obtain your user name and password from Telstra. Please disable any HB client that might have been previously running on the PC after the router is configured.
Click MAC Address Clone.
Select Enabled and click Clone My PC's MAC.
Click Status. Check the value of the Internet IP Address. If the Internet IP Address has numbers, this means the router has been properly configured. You should now be able to access the Internet. If you're not online, perform a power cycle to synchronize the router with the modem. For instructions, click here.
NOTE: If the Internet IP Address is all zeroes (0.0.0.0) click first then click . If the Internet IP Address is still all zeroes (0.0.0.0) perform a power cycle. For instructions, click here.
If the IP Address starts with 192.168.1.xxx or if it has the same first three numbers (octets) as the router's IP address, change the router's LAN IP address to a different LAN segment. For instructions, click here.
Once the router is configured, perform a power cycle. For instructions, follow the steps below.
Shutdown the computer.
Unplug the router's power cable.
Unplug the Broadband modem's power cable and wait for 30 seconds.
Plug in the Broadband modem's power cable and wait for its lights to appear stable.
Plug in the router's power cable once the modem's lights appear stable.
Power on the computer on and test the Internet connection.
NOTE: If you're not online after performing this procedure, you may need to upgrade the firmware of the router.
Sep 28, 2010 | Linksys Wireless-G WRT54G Router
Jun 22, 2009 | Computers & Internet
May 23, 2009 | Sitecom xDSL/Cable Broadband Router DC-200
Mar 26, 2009 | Lenovo 3000 N100 CoreDT2080 VB PC Notebook
Dec 25, 2008 | Sony Playstation 3 (PS3) Console
119 people viewed this question
Usually answered in minutes!