Hello ,
Take the back off the phone and remove the battery. Ensure your SIM card is secure, fit that in proper,if not fit again.Wait a few moments then put the battery back in
and power the phone on. This will allow the phone to find signal. If
that doesn't work, If possible,
Go to there website >support >mobile >
http://www.lg.com/in/support/mc-support/mobile-phone-support.jsp
Download >detals guide>Download lg support tool to PC>install in conputer> and download or update through following software.
and reinstall the software.
Or you can go local technician who can update the driver or re install the driver.
Hope it will help you.
Posted on Dec 29, 2010
Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!
Posted on Jan 02, 2017
Mar 14, 2018 | Sewing Machines
Jul 07, 2014 | Ovens
Feb 03, 2014 | Kyocera Mita Fs-1016 Mfp Multifunction;...
Jul 07, 2011 | Parkinson Cowan SG320 Gas Kitchen Range
Broken heater lamp error
The temperature won't rise by 1°C/33.8 °F during warming up and the heater is turned on for 5 seconds.
The temperature won't rise by 1°C/33.8 °F during printing and the heater is turned on for 5 seconds with the duty cycle more than 60%.
1. Defective fuser thermistor.
2. Broken thermal cutout or heater lamp.
3. Defective engine/high voltage PWB.
Turn power switch off, and remove power cord.
Detach YC7 connector on the engine/high voltage PWB.
Measure resistance between pins 1 and 2 of the detached connector.
Open (infinite)?
Yes Then - Replace the fuser thermistor.
No Then - Detach YC1 connector on the power source PWB.
- Measure resistance between pins 1 and 2 of the detached connector.
Open (infinite)?
Yes - Replace the thermal cutout or heater lamp.
No - Replace the engine/high voltage PWB.
I hope this was helpful,
Shawn
Mar 06, 2011 | Kyocera FS-1016 Printer
Oct 27, 2010 | 1997 Chevrolet Lumina
Jun 01, 2010 | LG KS360 QWERTY Keyboard Phone BRAND...
May 02, 2010 | Acer Aspire 3680 Laptop
Mar 28, 2009 | LG Prada KE850 Cellular Phone
Aug 29, 2008 | GE GSS25JEMWW Side by Side
30 people viewed this question
Usually answered in minutes!
×