Question about HP OfficeJet 7110 All-In-One Thermal Printer

1 Answer

All the lights on the printer are flashing off and on, the message it gives is turn it off and on. I did that and the whole thing starts over again. also my computer no longer recognizes my printer.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 4,338 Answers

Re-initialize the HP all-in-one

Force the HP all-in-one to reinitialize by following the steps below:

1. Turn the unit off by pressing the ON button.

2. Disconnect the power cord.

3. Wait five seconds, then reconnect the power cord.

4. but before plugging the unit back in, press and hold the # and 6 keys on the HP all-in-one numeric keypad. Continue to hold these keys down for a few seconds after plugging the unit back in to reset it. Once the all-in-one re-establishes communication with the computer, reset the language and country.


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe

Posted on Dec 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error Message 37,004.40:194943


Turn off the printer and open the printer back door. Use a spot light and give look inside properly. Make sure there no paper. Some time small part of the paper creates the problem. So you can do one thing after open the back door, top side etc make the printer upside down etc. So if anything inside that's will come out. After cleaning again connect it with PC and turn on. Now give a look. If you face same problem then Un-install the printer driver and software from the PC. Then restart the PC and Printer both. Now connect the Printer with PC via USB and install again the driver & software. Then try to print and let me know the result.

Aug 09, 2012 | Xerox Phaser 8400 Laser Printer

1 Answer

Lights flash and message appears "Turn off and on again." Have tried disconnecting the printer from the data cable and turning the power off and on. Have disconnected the power cable from the...


Please remove the cartridges from the printer. Take a dry lint free paper towel and gently wipe the contacts on the back of the cartridge (not the bottom from where ink is present). Wipe the contacts inside the printer (on cartridge carrier). Please snap the cartridges back into the cartridge carrier and please try to print a printer self test.

Aug 28, 2011 | HP Photosmart C5580 All-In-One InkJet...

1 Answer

Everytime I turn my printer on (Epson Artisan 700 series printer) it waits for about 5 to 7 seconds and then displays a message that says "A scanner error has occured. Please see your...


when I turn my printer on (Epson Artisan 700 series printer) it waits for about 5 to 7 seconds and then displays a message that says "A scanner error has occured. Please see your documentation". Then all the lights start flashing, And then I cant do anything, but turn the printer off.

I have turned it off and unplugged it and tryed again always same result.

bdl12920@aol.com

May 10, 2011 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

When I put my memory disc in for the pictures, it comes up what resembles a clock with both hands on 12 and the message B8801390. It then goes to another screen that reads turn power off and then on again....


Does it do this with the interface cable (USB or Ethernet) cable disconnected? If it does, there is a compatibility problem with the memory card, or the card reader slot has a problem. I wish I could use the error message to give you more detail, but HP doesn't have anything posted on its website yet for that series of error messages. There is a critical firmware update on your model (A909g) that fixes a number of really annoying problems, but I didn't see this one mentioned. Try it - you may get lucky.

Nov 18, 2010 | HP Officejet Pro 8500 Wireless All-In-One...

1 Answer

Hp all in one 6310


If align cartridges never goes away, you must replace all ink cartridges for a sucessful alignment..

I'm afraid i;ve never heard of align PAPER

Dec 29, 2008 | HP Officejet 6310 All-In-One InkJet...

1 Answer

Epson 220 not printing cd labels anymore


Clean the white areas on the tray with a light solvent cleaner like windolene/windex liquid. Also try giving the tray a helping hand as it is started to be fed into the printer

Nov 08, 2008 | Epson Stylus Photo R220 InkJet Printer

1 Answer

Problem w/3300 laser printer


Take the unit out right away and reseat it again,repeat if nessecary.

Oct 01, 2008 | Minolta magicolor 3300 Laser Printer

1 Answer

Flashing lights and 00C515C4 error message


Hello,

According to Hp's website the product needs to be restarted in a particular way. The link below will give you step by step instructions.

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00489814&dlc=en&product=3204464

Thanks

Aug 10, 2008 | Office Equipment & Supplies

1 Answer

Problem with HP 7450 and "Paper Jam"


hi, mezz

try this

There are 2 different types of flashing patterns with those two lights on the printer.
***
Resume light and power light BLINKING ALTERNATELY
Problem: Paper is jammed in the printer.
***
Resume blinking SIMULTANEOUSLY with power light

Problem:
The print cartridge carriage is stuck.

Solution:
1. Open the top of the printer.
2. Remove anything that is blocking the carriage path.
3. Turn the printer off.
4. Turn the printer on.

Problem:
There is something wrong with the printer. (I didn't write it, I am pulling this from actual HP tech documents, so don't blame me on this one) :)
Solution:
Turn the printer off.
Turn the printer on.
If the printer will not turn off, unplug the power cable from the electrical outlet or wall outlet.
Unplug the power cord from the back of the printer.
Wait about 30 seconds.
Plug the power cord back into the wall outlet.
Plug the power cord to the back of the printer.


oke, post in me back

tq
cropp

Jan 24, 2008 | HP Photosmart 7450 InkJet Printer

3 Answers

All available lights on printer are flashing


More or less your printer fuser has gone bad. Replace the fuse. I suggest that when buying a printer you don't with dell 1710N these printers gives a lot a problem. I work with them every day at work.

I suggest that you go with HP.

Oct 09, 2007 | Dell 1710 Laser Printer

Not finding what you are looking for?
HP OfficeJet 7110 All-In-One Thermal Printer Logo

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...