Question about Televison & Video

1 Answer

I haven't used this tv for a while. I have set it up again and tuned it. nHowever, it is asking for a 3 digit password. I don't recall ever entering one originally. Is there some way of accessing the TV? Purchased Harvey Norman 13/11/2008

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,140 Answers

Hi,

If you don't recall ever having set a password then it's likely that the TV is still set to the default manufacturer code. On many TVs this code is often something simple like 000, 111, 222, 999, 123, etc.

I would try some of these obvious codes. If you can tell me the brand and exact model number of the TV, I should be able to check the default codes or a way of deleting the code.

Hope this helps. Please post back with these details if you need further assistance.

Regards,
BElectric

Posted on Dec 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find the password for my AOC TV?


You might need to do a hardware reset if somebody programmed a password into your TV. This will erase all settings and set it back to the factory defaults.

Try this:
1. Press and hold "Menu" and "Channel+" on the TV. (do not use the remote)
2. Using the other hand, press the Power button.
3. A small screen should appear in the top left part of the screen.
4. Using the remote, select "Memory Recall" and Enter.
5. Power off and reboot the TV and Computer.
6. Run channel auto-scan to regain the picture.

May 19, 2014 | AOC Televison & Video

3 Answers

I forgot the password of dany hdtv-600 tv device please tell what to do?


thanks
yes Default password 0000 works i used it and resolved the issue

Feb 20, 2012 | Televison & Video

1 Answer

Bought a 2nd hand N64 & don't know how to set it up on the tv as no instructions.


You now need to find a channel on your TV that ins't used for anything else (eg an old vhs player or non-digital tv) then whilst on that channel you need to go into your TV's menu, there is often a button both on the remote and TV itself for this. This is where you turn on your N64 if you haven't already. You then will need to go onto automatic tuning (or if you prefer, manual tuning, in the programme section (if you dont have a programme section, just srcoll through each section till you find automatic tuning) your TV should then start to search for channels, after a little while of searching it should find the N64's frequency it may be a terrible picture that is mostly fuzz you can either carry on the tuning to see if it'll find it better or just head straight to fine tuning (if you decied to keep going you can still fine tune for the best picture quality possible and also if the TV doesn't find it just follow the previous steps till it locates the N64 again) once fine tuned you will need to store this new channel and then you can go ahead and enjoy countless hours of fun on the worlds best gaming console. (If the automatic tuning doesn't find the N64 at all try manual tuning). If you have any other issue with the console itself just drop me an e-mail at garleet@hotmail.co.uk. Hope I was a help.

Jan 20, 2012 | Video Game Consoles & Games

1 Answer

Does tuning stations in a dvd/vhs change the tv settings?


no, it will not change your tv settings. because your only tuning the stations of your lgv271. so don't hesitate on tuning your lg v271.
if you have any questions, just ask me.

Jan 14, 2012 | LG V271 DVD Player/VCR

1 Answer

Try to set the clock on my samsung MR1032BB microwave in my 2003 Georgie Boy Pursuit motorhome. It sets and then after 3 minutes it starts beeping and gives the numbers 8888 and 6666 and you can't...


Yes it is on recall and asks that you don't use it, as well as unplug unit if at all possible, and if not, leave door ajar and don't store anything in it.Here's a number to call at Samsung.
Owners may contact Samsung at 800-932-3837

Aug 22, 2011 | Samsung SMH8165STE Microwave Oven

1 Answer

Hi. i lost my password of my Projector Benq MP610, with code 22504-15078-7347-9687. i'm looking ford to your help.


If you forget the password: You will be asked to enter the four digit password every time you turn on the projector. If you enter the wrong password, the password error message displays. You can retry by turning off the projector (by pressing Power and start again, or if you did not record the password in this manual, and you absolutely do not remember it, you can use the password recall procedure. To enter the password recall procedure: Press and hold Right for 5 seconds. The projector will display a coded number on the screen. Seek help from the local BenQ service center to decode the number. You may be required to provide proof of purchase documentation to verify that you are an authorized user of the projector. To change the password: 1. Open the on-screen menu and go to Setting->Change Password 2. Press Left or Right (button). A "Password Change" message displays. 3. Enter the old password. i.If the password is correct, you can go on to enter new password.
IMPORTANT: Write your selected password down here in this manual so that it is available to you should you ever forget it. Password: __ __ __ __
ii.If the password is incorrect, a "Password Error" message displays. Press Up to try again or press Down to cancel. 4. Check the new password. i.Pressing Auto completes the procedure. ii.Press Up to try again. iii.Press Down to cancel the set-up and return to the on-screen menu.

Good luck!

Mar 10, 2011 | BenQ MP610 Multimedia Projector

1 Answer

Camera Canon A710 IS started to ask set time date when turned on


When the camera is left without power for an extended period of time, the time and date settings are gone. You need to reset them and when you're finished, click the set/ok button twice.

Feb 25, 2010 | Canon PowerShot A710 IS Digital Camera

1 Answer

I have a BenQ Projector MP610. I lost my password and now i cannot use my projector. I get the code: 22504 13898 6789 8507. Please help...Please email me the decoded password... vmonacillo@yahoo.com


If you forget the password: You will be asked to enter the four digit password every time you turn on the projector. If you enter the wrong password, the password error message displays. You can retry by turning off the projector (by pressing Power) and start again, or if you did not record the password in this manual, and you absolutely do not remember it, you can use the password recall procedure. To enter the password recall procedure: Press and hold Right4 for 5 seconds. The projector will display a coded number on the screen. Seek help from the local BenQ service center to decode the number. You may be required to provide proof of purchase documentation to verify that you are an authorized user of the projector. To change the password: 1. Open the on-screen menu and go to Setting > Change Password. 2. Press Left 3 or Right4. A “Password Change” message displays. 3. Enter the old password. i. If the password is correct, you can go on to enter new password. IMPORTANT: Write your selected password down here in this manual so that it is available to you should you ever forget it. Password: __ __ __ __ Keep this manual in a safe place. ii. If the password is incorrect, a “Password Error” message displays. Press Up 5 to try again or press Down 6 to cancel. Password Setup Enter Password Press Auto to Confirm Press 5 or 6 to change number Press 3 or 4to move 0 0 0 0 Password Setup Do you want to use 0 0 0 0 as your password? Yes Auto No 5 Cancel

Feb 17, 2010 | BenQ MP610 Multimedia Projector

1 Answer

I have lost channels 5,itv 3,and itv 4,and do not know how to retune my tv, all other channels appear to be alright slightly confused when i press the menu button and not know which links to follow?


All Freeview channels need re-tuned after 30th September.
To re-tune your Sony TV...

1.Press Menu button then go to settings...

2.Scroll down the menu icons until you get to 'Digital Set-up'

3.Press enter/centre key next to direction arrows

4. Select spanner icon and digital audio tuning.

5. You will then be asked if you want to start digital audio tuning.

6. Press enter/centre button....and thats it!.... TV will automatically re-tune.

Oct 01, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...