Question about Haier ESD300 / ESD301 Built-in Dishwasher

1 Answer

I have had the dishwasher for about 2 years. I suddenly just stopped. I can't get any button to work.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

My dishwasher had the exact same symptoms. The control panel was faulty. I discovered this by testing the connector with my multimeter, looking for the LED connections. When I wasn't able to find anything, I carefully peeled it off. (See picture.) I expect at least one of the traces underneath the nasty brown line is faulty, causing the control panel to not function. On the control board, I jumpered the first pin to the fifth pin from the bottom of the connector, as viewed with the Haier brand right-side up, and pots & pans started right up.
I have had the dishwasher for about 2 years. I - flszen.jpg.
It looks like I can get a replacement control panel from Sears Parts Direct for $30.

Posted on Dec 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dishwasher Asko 1986 suddenly stopped working


Also is mainly a control board's
Did you have a power outage or power surge?
Need model

Oct 08, 2016 | Asko Dishwashers

1 Answer

13 yr old dishwasher suddenly stopped working mid pre wash. Water left in bottom of machine. Power point is fine. Will not start at all now though. No lights turn on either. Is it fixable ?


If it is 13 years old, it has most likely reached its end of life--whatever the cause, something has malfunctioned. However, a service technician would probably be able to advise.

Mar 16, 2016 | Dishwashers

1 Answer

How do I reset my mdbh955aws?


DIY fix your Maytag dishwasher on the cheap - Instructables

www.instructables.com/.../DIY-fix-your-Maytag-dishwasher...
InstructablesLast week my 1.5 year old Maytag dishwasher suddenly quit working. ... of its own for about 2 years, shutting off the breaker to reset it has worked until today.

Oct 19, 2015 | Maytag Dishwashers

1 Answer

Dishwasher only runs for 21 minute cycle


I bought and replaced the control board in the door. $145 CAD it took 5 min saved myself $300

May 07, 2009 | Dishwashers

1 Answer

Smeg Dishwasher ST 663 sometimes won't work


My dish washer stops after i5 minutes, don't know what the problem is, water is going in but just suddenly stops, i changed the hose but still the same. Any help welcome

Feb 22, 2009 | Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

2 Answers

Dishwasher stopped working. Suspect electronics issue.


An expert from another site says it's a faulty control panel and may need new actuators.

Jan 31, 2009 | Dishwashers

2 Answers

Maytag Dishwasher: MDB/C-2 Suddenly Stopped Worked


I have had this dishwasher since 2003 and haven't had a problem whatsoever. This is one of the best dishwashers I have purchased out of the 4 I have had.

Jul 21, 2008 | Maytag 24 in. MDB5600A Jetclean II...

1 Answer

Whirpool quiet partner dishwasher seems to have no power


Ok there is a thermal fuse mounted on the control board that shuts down when it gets too hot. Did you run a sanitize cycle? Even if customers dont use the sani cycle which i recommend the fuse may open due to poor wire connections. The new fuse kit comes with a new harness and new connectors. Check the old fuse to be sure its bad. Dont remove the connectors from the new switch at all - dont disturb them and they will work better.

Dec 02, 2007 | KitchenAid 24 in. KUDG25SH Built-in...

Not finding what you are looking for?
Haier ESD300 / ESD301 Built-in Dishwasher Logo

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Haier Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Tim Doolittle
Tim Doolittle

Level 2 Expert

114 Answers

Tom Chichester

Level 3 Expert

36279 Answers

Are you a Haier Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...