Question about Zenith D61W25 61" Rear Projection Television

1 Answer

Picture Greatly distorted all of a sudden by many yellow lines

Zenith D61w25 Wide screen Digital Projection 61 inch TV
Picture Greatly distorted all of a sudden by many yellow lines going across the top half of the picture dropping down in the center and up on each side. It also look link in other places the convergence went out with red and blue words at different places mostly vertical but I believe it is more than convergence. Sound ok

Posted by on

  • 2 more comments 
  • joe1840 Jul 07, 2008

    this

  • jrtcjt Jul 09, 2008

    my picture is similar to joe 1840's. also any wording on tv seems to have 3 shadows.I also have lines on top and on the right side of picture.

  • dgcowboy Nov 18, 2008

    My TV looks just like the picture that was posted. Does anyone know what could be wrong?

  • tidrion Dec 31, 2008

    Anyone get this fixed?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 27 Answers

Projection TV sets are known to have two common problems. The first problem that is common to these sets is convergence failure. When this happens the TV will usually look 3D, Wavy/Distorted, etc. It may also shutdown and blink an error code.

The second common problem with Projection TV sets is dull video, halos around objects, white looking video, or red overpowers the screen. This is commonly caused by the fluid in the lens being clouded overs. To get fixed either call in a local TV repair company or goto sites such as Tv Repair Kits to get a repair kit with instructions. Here is there link.

http://www.tvrepairkits.com/xcart/home.php?partner=papa1dude

They have put together complete kits for most models that include the parts, step by step photo instructions, repair assistance, etc.

Posted on Jun 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Samsung DLP HLN 5065W and recently the TV started to get Horizontal Lines in it with a 2 inch black horizontal line across the TV and the bottom half you could see the picture and the top half...


If your TV looks 3D, warped, or distorted it likely has a convergenge problem.
If however it just looks dull, washed out, redish, greenish, or blueish or if it looks like objects on the screen have halos the fluid in the lens has soured.
You can search google for parts or you can get the parts with repair instructions from sites such as www.TvRepairKits.com

Feb 27, 2011 | Samsung HL-R6168W 61" HDTV

1 Answer

Picture all of a sudden went distorted on top and bottom, like a curve shape. Is there a way to fix this or has anyone experienced?


Projection sets have two very common problems.

The first common problem is convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Nov 09, 2009 | RCA HD61LPW175 61" Rear Projection HDTV

1 Answer

My tv is blurry, showing green and red waves...zenith d61w25


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic2_bing.gif,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Sep 01, 2009 | Zenith D61W25 61" Rear Projection...

1 Answer

Hitachi Projection tv


Projection TV sets have two very common problems listed below.

Problem #1) Convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jul 17, 2008 | Hitachi 43F300 43" Rear Projection...

1 Answer

Blue circle across top of tv screen & maybe some yellow


Good Day,

Does the blue spot have tin white lines?? Is there a picture behind the 'circle'? You may a blue crt (tube) problem.

Jun 06, 2008 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

Picture and color distortion


I am having the same problem hopefully some one answers us.

It's a Blue Convergence issue but how to fix it I am still waiting.

Apr 13, 2008 | Hitachi 60SBX78B 60" Rear Projection...

1 Answer

No picture with Vertical bars across screen


It sounds like one of the flexes on the LCD cube has either become unplugged/ loose, (there is a gate that locks the flex in connector on the DMD board), or flex damaged. Has the TV recently been moved or strongly jarred?

Nov 13, 2007 | Zenith E44W46LCD 44" Rear Projection...

1 Answer

My Hitachi 65SWX20B Model, made in 02, just developed Picture disturbance


Can you post a picture of the set. This might be a convergence problem. seeing the set will confirm this.

Thank you,
shuttle83

Oct 28, 2007 | Hitachi 65S500 65" HDTV-Ready Rear...

Not finding what you are looking for?
Zenith D61W25 61" Rear Projection Television Logo

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Zenith Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...