Question about Aprilaire 700 Humidifier

1 Answer

Model 700. The water runs constantly while the furnace is on despite what the humidistat is set to. Can you give me some tips on how to fix?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Aprilaire Master
  • 1,033 Answers

Can you turn off the water flow with the humidistat is set to off?

Posted on Dec 28, 2010

  • chrros7 Jan 05, 2011

    Same problem for me. i have 2 units, each equipped with an Aprilaire 700. One kicks on at a dial setting of "4" but the other is on at barely even "1" (basically on all the time). Any suggestions on how to fix/troubleshoot?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Solenoid valve


The humidistat could be defective.

Dec 04, 2013 | Aprilaire 700 Humidifier

1 Answer

2005 Aprilaire 700 humidifier. Replaced a non-working circuit board. Now, the humidifier works fine when the furnace is running. It starts and stops as it should based on humidistat setting. Problem: ...


It sounds like it is just miswired. The low voltage wiring off the humidistat should be on W and C on the circ. board at the furnace. If you have it on R and C then it will power it constantly regardless if the heat is running or not. W is only energized on a call for heat which is typically when you want that type of humidifier to run

Feb 02, 2013 | Aprilaire Humidifiers

1 Answer

Water and motor always run on Aprilaire 760, even when furnace is off.


Hope this solves your problem, look for the humidistat, it should be located on cold air return duct near furnace, make sure it is not set in the on position, if it is, then this is why it is staying on, please set humidistat any where from 20 to 35%, never over 40%. If the humidistat is set properly and is still running, you may have a electrical problem, humidifier circuit should only receive power(24 volts) when the indoor blower motor of furnace receives power, also if you have galvanized plumbing in your home, you may have a piece of rust or lime deposit in the humidifier solenoid valve preventing it from closing, turn water off to humidifier and disconnect water supply line entering solenoid valve inspect & clean protector screen. Good luck.

Mar 03, 2010 | Aprilaire 700 Humidifier

1 Answer

Honeywell HE260 leaks somewhere


Neither, even if the solenoid or humidistat stick, it should always drain properly. Is the unit mounted on the cold air return duct or the supply plenum? If it's mounted on the supply plenum, the water panel might be getting blown forward and spilling the water. High efficient furnaces also can leak water on the floor if its drain is restricted. If hum. is mounted on return duct make sure drain is clear by blowing through it. On Honeywell hum's I've seen the rubber hose from the solenoid valve to the distributor tray leak too, check the rubber 1/4" hose.

Dec 28, 2009 | Honeywell HE260A1010 Whole House...

1 Answer

My humidifier is set at 40% but the humidistat reading never


Have you measured the amount of water dripping into the drain? The specification is 1 quart in 2 and half minutes. If it is much less, get your solenoid checked. I had the same problem and got it replaced and it works as per specification now. You also need to see how many minutes in an hour your furnace is actually running. The humidifier runs only when the furnace is, so the more it runs the better. The specification is 35% with the furnace running at 70%.

Jan 29, 2009 | Aprilaire 700 Humidifier

1 Answer

Water runs when furnace is off, but stops when furnace is on.


the 760 humidifier does not need a transformer wired externally. the 760 has its' own 24v transformer inside the fan compartment. this transformer will provide the power to enrgize the water solenoid as needed. it sounds like to me the additional trasnformer is hot all the time. when the furnace comes on, the unit gets power and the internal transformer is cancelling the power from the external transformer. this would explain why it quits running when the heat is on. since the external transformer is hot all time, when the heat shuts off, the solenoid is getting energized by the external transformer. to make this run correctly, you need to get rid of the external transformer. leave the humidifier high voltage wires hooked up so they are only hot when the furnace runs. if you have a humidistat that has a r and c terminal, you will need to wire these directly to the r and c on the furnace control board and move the switch inside the humidistat to "power". make sure it is not on "bypass". then wire your 2 brown wires from the humidifier to each of the "h" terminals on the humidistat. if you have a humidistat that only has 2 terminals, wire one brown wire to each of the terminals. this should allow it to run properly.

Jan 28, 2009 | Aprilaire 700 Humidifier

1 Answer

Fan running but no water flow


the humidistat on this unit just acts as a set of dry contacts. with the humidifier plugged in, you should be able to touch the 2 brown wires by the water solenoid together and get the power fan to run and the water solenoid to enrgize. if you do this and water does not flow, you most likely have a bad water soenoid. it is either electrically bad, or just plugged with water deposits. sometimes you can pull it apart and clean it, sometimes you just have to replace the solenoid.

Jan 26, 2009 | Aprilaire 700 Humidifier

1 Answer

Aprilaire 700 never shuts off


Thanks for your question,
Sounds to me like you have a bad solenoid valve in your Humidifier, this will need replaced, the solenoid is supposed to open and close when there is a call for humidity only when the furnace is running, then when the proper amount of humidity is sensed by the humidistat, then will it shut off, with the solenoid not working it will let water flow through like an open faucet, the solenoid is the componet that the 1/4in copper tubing connects to at the humidifier, has two wires running from it, you will need to shut the power off before changing this out, also shut the water off at the valve at the other end of the 1/4in copper line, or you might get soaked,please be careful when installing the new solenoid, making sure the water line connection is secure, or you will have leaks, hope this was helpful, please leave a rating, thanks again for your question,
mr.grzz

Jan 25, 2009 | Aprilaire 700 Humidifier

1 Answer

Aprilaire 700 operating at wrong time


You want the humidifier to run in heat mode which is the r-w1 terminal on the stat.

Nov 17, 2008 | Aprilaire 700 Humidifier

2 Answers

Humdifier on furnace


I have the exact same problem. At this time I am looking for a new solinoid (part on the bottom) to install. Anyone else having this problem and know where to find replacement parts

Jan 22, 2008 | Aprilaire 700 Humidifier

Not finding what you are looking for?
Aprilaire 700 Humidifier Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aprilaire Humidifiers Experts

Paul Carew

Level 3 Expert

3238 Answers

jdthefixer

Level 3 Expert

744 Answers

Mack Baxter

Level 3 Expert

383 Answers

Are you an Aprilaire Humidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...