Question about Hotpoint WMA32 Front Load Washer

1 Answer

Control panel hotpoint fills for a minute then does nothing. The drum doesn't turn, can here a click as if the timer is trying to move on. Have checked the pipes and seems fine. The top lid has been took off and the wires seem in tact with no burn out.

Posted by on

  • sal214 Jul 07, 2008

    Thanks, we had a part replaced on the door a year ago as it got stuck and wouldn't open. The door seems fine and thought it was the dial, programmer or control. We stopped the insurance on this, would it be better to get new machine, than paying out for call out and repairs? It's 8+ years old and very noisy.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 76 Answers

Its the door latch its playing up you need to get it looked at by a pro

Posted on Jul 07, 2008

  • Jacob McNamara
    Jacob McNamara Jul 09, 2008

    Yes i think its time to get a new one electronics these days are practicly desposible and if you get a new one try to aim for the analog ones cause the digital ones break real easy and its like a $100 just to get it looked at.





    Hope you find a good one!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My front loader fills with water but then does nothing. The drum doesn't turn. Can hear clicking sound from the control panel as though it's moving through the cycle. Checked the belt and is in good c


Does it spin if you turn to spin cycle?
Try this:
Jam lid switch with something plastic or wood.
Put on spin cycle.
Spin the tub by hand.

If the bowl then starts spinning properly, your problem is the motor starting capacitor.

May 21, 2014 | Daewoo Washing Machines

6 Answers

Problem with Hotpoint WD64 Washer Dryer


this possibly a bad contact on the panel board, thats why the system malfunction by itself. better to check on the every switch contact and clean for any moisture on the board.

Oct 31, 2008 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Washer won't rinse, drain or spin.


My guess would be that you have a faulty timer if you can manually move it and the operation of the washer resumes.
http://tclaundryrepair.com/

Feb 18, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Washing machine won't spin


Do you hear the motor spinning loud whirring noise,when drum is not,if so drum belt has come off or snapped,if no noise possible brushes on motor need replacing

Jan 18, 2009 | Hotpoint Ultima WD72 Front Load...

1 Answer

WMA54 Hotpoint Aquarius drum does not turn during wash or spin


If the machine pumps water inside but does not start :

Start checking the lid switch, if this is stuck the machine wont start.

If the drum does not move at all, the motor, the motor control unit, the motor coupler, the control board may be faulty.

For more details , see: It doesn't spin

See also a general diagram here: redarrow.gif Front Load Frigidaire/GE/Kenmore Style

Jan 06, 2009 | Hotpoint WMA30 Front Load Washer

2 Answers

WMA54 Hotpoint Aquarius drum does not turn during wash or spin


Start checking the lid switch, if this is stuck the machine wont start.

If the drum does not move at all, the motor, the motor control unit, the motor coupler, the control board may be faulty.

For more details you need to observe if machine is draining and pumping water inside during cycle, see: It doesn't spin


Jan 06, 2009 | Hotpoint WMA54 Front Load Washer

1 Answer

Drum not turning


My problem is the same as colins my hotpoint wm63 is starting okay i.e. water fills up but drum is not turning. I can hear it clicking through the cycle but drum doing nothing. i to have just put in new carbon brushes but still no joy please help

steve

Apr 08, 2008 | Hotpoint Aquarius WD63 Front Load...

2 Answers

Hotpoint WD61 stops near start of wash cycle


all in the timer. but there may be nothing wrong. sometimes in the cycle there will be a gap between water full and agitate or between drain and spin depending on settings. try it again and let it go and if there is a gap of more than 5 minutes than it needs a timer. most machines timers are right around $75 and you can most likely replace it yourself. sears appliance parts is the place to buy it. you can order it and they will deliver it to your door. or if you can get the phone # most of the outlets have a parts dept. also they take parts back for full credit for any reason.

Mar 05, 2008 | Hotpoint WD62 Front Load Washer / Dryer

Not finding what you are looking for?
Hotpoint WMA32 Front Load Washer Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...