Question about Veo Observer Network Camera
I also lost the software for this camera
The software is on the camera, all you have to do is connect it to your network and let it get an IP address, after it shows an address on the side window, use internet explorer to go to that address ( 192.168.1.XXX) or whatever the mask is for your network, make sure internet explorer is set to allow activex controls downloading, the browser will download the control and ask for password and user name, the default is "password" and "admin" good luck
Posted on Jul 24, 2008
This was great help However when I try to input the password admin Password it tells me in correct. please help
Posted on Sep 14, 2008
1st You download Webcam Driver.
Veo network camera Driver After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Veo Camera Drivers for Windows XP Vista Windows 7
Posted on Feb 24, 2014
Pushing the Veo power button "off" and then "on" should reset the cam to the default settings: admin and password
Posted on Oct 24, 2010
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 31, 2009 | Veo Observer Network Camera
May 23, 2008 | Veo Advanced Connect Webcam
1,270 people viewed this question
Usually answered in minutes!