Question about Lexmark Optra T612n Laser Printer

1 Answer

935 Service Print Error - Lexmark Optra T612n Laser Printer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

935 - Mirror Motor unable to reach operating speed.

This error code indicates a problem with the mirror motor in the laser unit, the cable to the engine board cable or engine board itself.
Check the continuity of the mirror motor cable connected to J3 on the engine board.
If incorrect, replace the cable.
The voltage at J3-7 measures approximately +24 V dc.
If incorrect, replace the engine board.
If correct, replace the FRUs in the following order: engine board -> printhead assembly

Or you could try if a power cycle resolves the error (at least temporarily)

Posted on Dec 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I use a Unisys uds9718 printer. I receive 935 service print head error. Any suggestions? I have wiped down all the rollers.


This is similar to an error I fixed for a relative, who has an HP printer. What you need to do is call the manuacturer, and ask for another print head. My relative got hers free, because she was under warranty. Hopefully it's the same case for you.
Just change the print head and your good to go. Hope I helped. Post on my site and I will get back to you.

codfanboys.comli.com

Nov 22, 2011 | Office Equipment & Supplies

2 Answers

935 Service Printhead error


Error 935
Printhead Error - Mirror motor unable to reach operation speed Check cables, look for chafing or damage to ribbon cable at sharp bends around rear cover. Replace printhead or ribbon cable.

May 27, 2011 | Lexmark E350d Laser Printer

1 Answer

Lexmark e450dn print head error: 935.1x, 935.2x --------------------------------------------------------------------- what can i do? i cleaned the scanner unit and error its present on...


935 error indicates that scanner motor cannot reach proper speed. Likely the scanner motor is bad but it can also be the controller board.

Mar 10, 2011 | Lexmark E450dn Laser Printer

2 Answers

935 service printer head error. how do I fix it?


The Mirror Motor of the printhead is unable to reach operating speed. This means you have to replace the printhead.

Mar 08, 2011 | Lexmark Optra M412 Laser Printer

1 Answer

Lexmark E350d erreur 935 Service Printhead error.


Yuot should let the printer toruned off at least 1- 2 hors, and then it will work again. It is a heating problem when you print a lot of pages.

Oct 13, 2010 | Lexmark E350d Laser Printer

1 Answer

935 service printhead error


Hello. Unfortunately, if that's the case, there's not much you can do about it but have it serviced. Hope I can assist you more with it.

Apr 06, 2010 | Lexmark Lemark E352DN Laser Printer

3 Answers

I have a Lexmark E450dn displaying a "935.15 Service Printhead" error message and will not print. Seeing as Laser Printers do not have printheads, instead they have Scanners and Fusers, which should I be...


a 935 printhead error is a fatal error which means the scanner motor has failed to initialize. the term printhead is short for printhead scanner. this error can be caused by either the engine board or the scanner % wise 40%engine board 60% scanner ive done 120 repairs on lexmark laser for the last 7 years trust me one of these is the problem

Jun 16, 2009 | Lexmark E450dn Laser Printer

1 Answer

Service Printhead Error


this problem come whene printer fuser chamber have faulty ,
fist of all do service of fuser and check
after than change pressure roler and teflone slive if problem not solve

Apr 22, 2009 | Lexmark E450dn Laser Printer

2 Answers

Camera error


Your lens is not communicating properly .

It is stuck it is due to mechanically problem you are having this error.

Jan 24, 2009 | HP Photosmart 935 Digital Camera

1 Answer

Optra t610 error 935/933/934


replace printhead - scanner assembly. The scanner motor is not working correctly. Need to remove side covers, back of printer assembly, the top cover. Printhead is below the top cover

Jan 03, 2009 | Lexmark Optra T610 Laser Printer

Not finding what you are looking for?
Lexmark Optra T612n Laser Printer Logo

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Don  Farrell
Don Farrell

Level 3 Expert

1018 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...