My Philips DVD DVP 3005 won't play any sound. The picture is absolutely fine though. What can I do?

Contact Philips support at: http://www.support.philips.com/support/contact/contact_page.jsp?userCountry=us&userLanguage=en

f the tray won't open or close properly, check the belt for dirt or wear. Then check the tray for misalignment. If needed, remove, clean, lubricate, and reinstall the tray following the instructions in the owner's manual
God bless you

Try this:

Press home, arrow down to 'settings', press OK, arrow down to 'system'
Press 5, 0, 1, 8, 0, OK

I would take it back and exchange it ,,if you purchased it new,,But if you bought it used,,and cant take it back,,I would take the top off ,,You can acces the dvd to retrieve disk and maybe see what the prob is,,thanks and goodluck

It sounds as if you have inadvertantly locked your dvd player. Try using the code 136900. If this passcode is accepted, then access the general setup menu (using your remote) and choose the Disc Unlock option.

I hope this helps. I completely relate to the frustration of this very problem.

I think you are looking to make your DVD Player, Region Free?? If so, here is a link that has an upgraded firmware that is NOT RELEASED BY PHILIPS, so use this at your own risk. Please read very carefully before attempting any of this. Use at your own risk.

Click Me

Heop This Helps

Hi,

Pls try a full master reset which if done correctly would revert the unit back to factory default:
1. Power on the unit;
2. open the front panel lid to have access to the controls;
3. simultaneously press and hold the channel up and down buttons;
4. wait till "BYE" is displayed;
5. wait till clock switches off;
6. power on again and re-configure.

You may need to restore "Region Free"
1. Power on the DVP 3005.
2. Bring up the System Menu.
3. Navigate to the Preferences page.
4. Press the following combination of keys on your remote in this order to bring up the secret menu showing the Region Code.
1 3 5 5 6 6.
5. Use the arrow keys on the remote control to change the Region. To make it region free, set the Region code to “0′ (zero).
6. Exit the System Menu.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Sounds like a bad disc, does it do it on all discs and all at 15 mins?

Its called firmware, and you would need it on a disc, you would have to get it from Philips or maybe their website.

Don't download firmware from anyone else but Philips.

DVD player must be made region free by unlocking it.. after that you can play all the discs you want.. for ubnlocking it you can try google//