Question about Sony FD Trinitron WEGA KV-36FS120 36" TV

4 Answers

Sony FD Trinitron Vega 2004 Stanby Flashes TV will not turn on

Stanby button flashes. TV will not turn on. I have tried unplug it and turning it back on and still the same problem. How do I resolve this.

Posted by on

  • 7 more comments 
  • dkeir Jul 08, 2008

    The flash count is 4 times.

  • MikeLivonia Jul 10, 2008

    I have a Sony Wega Trinitron 20-inch that won't turn on either.

    The standby light flashes four times, whether the TV is on or off.

    Pressing the on button results in sound for a few seconds, nothing on scree, then the TV shuts off.

    Any light you could shed on this is much appreciated.


  • rc_bigcastle Sep 21, 2008

    i adjusted the tv to the enhanced 16" by 9" feature put a dvd movie that was already in that mode and it made the picture shrunk it self to a line at the bottom of the screen and then went away now sound is ok the tv has a dark rainbow of colors and it turn off in a few seconds. the stand by flashes i believe 4 times in the tv ruined or is there a fix

  • julsea Sep 26, 2008

    My mother has a Sony Trinitron and she turned the tv on walked out of the room to find it off, but the stand by light flashing 4 times. Unplugged - even for days and it won't come on. A friend of mine has a different model - purchased around the same time and her stand by light was flashing - she unplugged the tv and it worked, but then it happened again and now it won't turn on. Is there something defective with Trinitrons?

  • ai-ling logan
    ai-ling logan Oct 10, 2008





    blinks about a dozen times upon plug in, then cycles 5 blinks - won't turn on at all. What possible problems (and approximate repair cost?)









  • jclerk Oct 13, 2008

    My Trinitron flashes 4 times and won't turn on. Any ideas what to do?

  • jlps1953 Oct 18, 2008

    My sony 36" will flash 5 times then stop. it will not turn on.

  • billhoneywel Dec 27, 2008

    Same problem with CY2001 KV36H5500 Sony WEGA. Stand by lights turn on - TV doesnt. Sometimes if you wait a week, it turns on. But repeats problem - and now it wont turn on at all. Help - besides throwing it (actually its too heavy to throw) away appreciated.

    BD.

  • Anonymous Jan 04, 2009

    the stby light flashes 7 times and tv will not turn...any suggestions?

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

This unit shouldb e flashing a repeated count on the standby light. That count will indicate the circuit in which a problem was detected causig the shutdown. Please post that count and we should be able to provide details on the repair.

Thanks,
Dan

Posted on Jul 07, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Stanby button flashes. TV will not turn on. I have tried unplug it and turning it back on and still the same problem. How do I resolve this.

Posted on Nov 14, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It's flashing 4 times for me - any ideas?

Posted on Sep 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Sony FD Trinitron Wega KV-34HS420 will not power on. Stanby red light flashes 6 times. TV will have problem for several days and then work fine for several days. It's out again now, who knows for how long? I've tried unplugging TV for several minutes but this does not help!

Posted on Aug 15, 2008

3 Suggested Answers

ginko
  • 19396 Answers

SOURCE: Sony FD Trinitron Vega 2004 Stanby Flashes TV will not turn on

Try first unplugging power cable for two minutes.

Posted on Aug 15, 2008

welcomejee
  • 10594 Answers

SOURCE: Sony FD Trinitron Vega 2004 Stanby Flashes TV will not turn on

what exact model number of your Sony tv to help you out.

Posted on Oct 10, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a sharp aquos tv model lc-32m400x. When i turn the power on via button at the back the green light comes on for about 10secs then turns to red and flashes about every 11/2 - 2secs. Any ideas.


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 11, 2017 | Sharp Televison & Video

1 Answer

My Sanyo tv is flashing different colours how can I stop it


Unplug from wall, and hold power button it for about a minute. Replug and turn on and see if that resets unit. If not, it needs repair.

Jan 10, 2017 | Sanyo Televison & Video

1 Answer

I have a 60 inch sony tv that have a red flashing on the lower left side,no picture when I turn it on and there is ringing sound.


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 09, 2017 | Sony Televison & Video

1 Answer

Hi Bush tv is flashing but not turning on at all. What can i do?


Hi press & hold on-off button while holding unplug power plug from the wall continue holding for 30 seconds.,.Plug in the POWER plug while holding on/off button hold for another 30 seconds ......,.Good luck.,

Jan 08, 2017 | Televison & Video

1 Answer

Sony bravia shuts off


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Aug 30, 2014 | Televison & Video

1 Answer

No Video Or Sound - Stand By Light Flashes 5 Times


If the tv was made before December 2008, there is a capacitor settlement from a class action lawsuit by Samsung. Supposedly (at no charge) they will send a repairman to replace the capacitors.

Nov 27, 2013 | Televison & Video

1 Answer

Would like to know the codes for a LG tv, Sony tv, and a TOSHIBA DVD ?


How to Program


Remotes With SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press "SET" Hold until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


Remotes Without SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press and hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed, at the end of the 4th digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


MAGIC SEARCH FUNCTION
1. The magic search function enables you to scroll through the entire code list one by one by pushing the on/off button. Each time you push the on/off button the remote automatically switches to the next code in the list and sends a signal to the device you have chosen.
2. Choose and press a device key i.e TV. LED will flash once.
3. Press and hold the SET button or if no SET button then hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
4. Enter the 4-digit Device code (refer MAGIC list) i.e TV is 0001.
5. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process.
6. Start scrolling by pushing the ON/OFF button as soon as your TV or Chosen device turns OFF lock the code in by pushing the DEVICE key again.

Mar 27, 2013 | Televison & Video

33 Answers

TV just flashes different colors


You have entered a diagnostic colour test. With the TV powered on, hold the 'Menu' & 'Enter' together, then press the power button. Problem resolved

Jun 25, 2006 | ViewSonic N2750w 27 in. HD-Ready LCD...

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-36FS120 36" TV Logo

1,124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

98868 Answers

The Knight
The Knight

Level 3 Expert

69845 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...