Fault h6&h8 for washing machine dwd f -1011 - Whirlpool Duet GHW9150P Front Load Washer

TRY A DEAWOO DEALER

I do not believe that is a 1E I think it's an IE error code which would be water inlet wiring or something like that. Here is the code list, scroll down until you find IE, Daewoo errors start at E2, hope this helps.

http://removeandreplace.com/2015/11/02/daewoo-washing-machine-error-fault-codes/

Jayshree, E9 error, pressure sensor error/water sensor error.
Replace water level sensor. The error display disappears if power button is turned off and on.This is what the service manual states.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Daewoo DWD M103 Service Manual Page 15 of 16
Daewoo CV701PC Service Manual Page 26 of 52
Daewoo Washing Machine Error Fault Codes
Washing Machine pressure switch

H6 fault code relates to heater problem I found cable feeding heater broken off repaired connection solved problem

Hi my washing machine ( a swan sw3010b ) keep draining the water and after a while it shows a foult IE. Can someone helps please

it is shakeing during the spin if so level it saftey switch shutting it down because of low voltage...low water''' or to much shakeing going on durning spin

I hd zs problem before,no problems in z water outlet,z pump

Clean optics and the AE sensor.

Most likely a control or motor issue. Probably should call service.

im having the problem now with my daewoo that every time i put a wash on its giving me a H6 message error