Question about Panasonic SC-PM19 CD Shelf System

2 Answers

NO DISK message

All 5 disks are showing NO DISK message when loaded and turned on. The disks are new so its not that.  What can I do to fix it?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 624 Answers

There is nothing an end user can do to fix this unit except to try and run a lens cleaning disc thru it. If cleaning the lens helps, you have just dodged a bullet. It says "no disc" because the laser pick up can't see, it is blind. It can't read any disc's so it says "no disc" even if there is one in it. I work at a Panasonic authorized service center and have repaired this exact model many times. The repair will cost about $125 or more to replace the laser. This is due to the high cost of the laser pick up.

Unless this is under the warranty, you really should just get a new one. This model of Panasonic normally has an issue with the trays getting jammed and are a technicians nightmare to repair. So, I don't really like to see them in my shop. It was a very bad design for Panasonic, they have had more trouble with the cd mech in this model than any other cd mech I have seen for them in the last 17 years I have been repairing them.

I am sorry to give such bad news, but it really is true. If I can be any further help, please feel free to let me know.

Dave

Posted on Jul 07, 2008

  • Sims Benson Sr Mar 29, 2012

    Dave....I, up until now have always thought panasonic made durable, long lasting products but, you will never have to work on a panasonic product for me because I will never buy another one!

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,224 Answers

Ummm i hate to say this but it is the disks
not too long ago found out the manufactures are using a new disk format makeing old players obsolite
this is counter piracy there is nothing really wrong with your player your just using new disks with new setup format
you will still have to go out and buy a new player for your entertainment
i bought a new player 8 months ago it played all old disks but when i bought a new movie a month ago it wouldnt play found out that the player and disks were no longer compatible with each other so i had to buy a new player things are now back to normal

Posted on Jul 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a singing machine, model STVG-1009, and the disk is not spinning and nothing reads on the screen. what could be the problem? how expensive is it to fix?


There appears to be a problem with the printed circuit board on these machines.
A possible fix is to remove the back cover then loosen the 4 screws holding the printed curcuit board.

Jan 28, 2012 | The Singing Machine Audio Players &...

1 Answer

I have a RCA RS2664B 5 Disc Player and the disc door won't open and you can not play CD'S. Help!!!!!


unplugged the unit for 5-10 mins........ when u plug it back to ac outlet....press the stop/eject...the cd player by default is trying to load the disk again...you wish to open the disk tray..once all disk are recover try another disk to play

Sep 12, 2010 | RCA Audio Players & Recorders

3 Answers

My RCA Stereo system 5 disc cd drawer keeps opening. When I put a cd in it, the unit opens and keeps opening. It only stays closed when I turn off the unit and manually push it closed. What could be...


These units are actually nice units. There is a "loading belt" inside that controls the tray movement as well as the final "load" of the mechism into the play position. If the load does not complete, the unit will "eject" or open up. This is most often cured by replacing the loading belt. This is a common problem with any rubber component. As it ages, it gets a little slippery and thus will not have the grip to complete the loading sequence. The belt for this will run about $5.

Dan

Aug 26, 2010 | RCA 100-Watt Stereo System With 5-CD...

1 Answer

Cd disk not turning . takes disk ,lifts disk ,and does not turn or plays cd


There may be a dirty leaf switch under the load tray thats in need of cleaning or the load mech may have slipped a tooth on the gear and may not be full enguaged. Does the laser assembly try to focus on the disc? The lens should move up and down right after loading. If not the unit may think drawer isnt fully closed.

Jul 15, 2009 | Audio Players & Recorders

1 Answer

All 3 CDs will not eject


When Turned on Hardrive keeps reading BOOTING UP but never ends
also cannot load

Can anyone HELP

Jul 05, 2009 | Bose Wave Music System CD Shelf System

1 Answer

Cd & g drive quite working


I had the same problem. The fix is a bit unorthadox. I removed the 4 screws holding the circuit board that is mounted directly under the CD player. Now with the board hanging free the unit works fine.
Good luck.

May 19, 2009 | The Singing Machine DVD/CDG Karaoke System...

1 Answer

How do you reset the 5 cd disk?


Try this to rest unit.With cd selected press and hold 'Stop' for about 5 sec. keep holding then press and hold 'skip FF' for about 5 more sec. Take off power then unplug unit, then power back on. A line shows across the screen if it works.

Nov 10, 2007 | Panasonic SC-AK78 CD Shelf System

1 Answer

'no disk' error message


Hello
Replace the strip connection wire that connects the Laser Picku Unit to main board. If the fault prevails, the Laser Beam emission to your devices' Laser pickup unit is less, and must be replaced with same type and number. OK.

Dec 25, 2006 | Sony CMT-NE5 CD Shelf System

Not finding what you are looking for?
Panasonic SC-PM19 CD Shelf System Logo

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

kakima

Level 3 Expert

98774 Answers

Are you a Panasonic Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...