Question about Pioneer Projection Televisions

Open Question

Pioneer PDP 505HD 50" plasma. Intermittent screen flicker when hook to AC outlet with Monster HDV 1000 inline. No flicker when powered from Honda i2000 generator with Monster HDV 1000 inline.

Posted by on

6 Suggested Answers

jerryg50
  • 1635 Answers

SOURCE: Pioneer plasma media receiver problem


The Pioneer multi media reciever box is only serviceable from the manufacture. They should have authorized service reps that they equiped to do service for Pioneer devices. They normaly change boards to service it. The regular service man would only be able to fix a simple cold solder connecton or fix some other simple part of it.

Contact the place where you bought it to find out about servicing it. You may find it cheaper and easier to simply replace it completely. It is very possible that there is no service support for this box. Get an estimate before accepting to service it.

Most of the small electronics of today are throw-away anyways...

Jerry G.

Posted on Apr 13, 2008

buBruce
  • 14 Answers

SOURCE: Pioneer pdp-6010 plasma popped loudly

Blew a transformer in the set. REATURN IT IF YOU CAN. Return it for the same tv. Pioneer makes the best plasmas in the world. This still cant contribute for the product of mass production. Defects will always arise in the best mass produced items in the world. If you cant return it then use the store warranty you will hope you purchased if you were a foold and didnt purchase it well then try to **** with the manuf. warranty. But by all means if you can return this tv to the store and only accept a new in the box model. Keep this in mind it does not hurt the stores budgets to return and exchange for the same item. The defective item goes for repair and gets to be resold again. So all stores will honor this with no trouble providing. #1 You are within the return policy. and most importantly #2 you dont buy from circuit city. If you did be wary of your warranty becuase the company just filed for Bankruptcy and they may not be in the position to honor that warranty soon. So if you guys have purchased something from circuit city that that has a warratny and you are within 30 days RETURN it and buy the same thing form the competior that you can forsee being in business for the next 3 years. All major competitors will price match so you wont have to spend a dollar more in most cirmcustances

Posted on May 31, 2008

welcomejee
  • 10594 Answers

SOURCE: Friend just bought and installed

This flicker problem is the cause, companies stop production of plasma and marketing LCD :D

Posted on Aug 02, 2008

  • 264 Answers

SOURCE: Pioneer PDP - RO6U Plasma:

unplug it from the power for one hour. Than Press and hold the power button on the on the TV for 20 seconds(It wont show anything. Than Release the power button....

After that plug the power and check the same...

Posted on Sep 14, 2008

  • 80 Answers

SOURCE: i have a pioneer 50

part #AWU1316 Pdp Service Panel it is listed as no longer avaible because they do not sell the pdp to the public or non service centers
sorry
scott

Posted on Nov 05, 2008

  • 1 Answer

SOURCE: pioneer elite 504 pu 50

Pioneer plasma tv cut off while in use. Can't turn tv back on.

Posted on Apr 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony wega kdf-e50a10 hit by lightning now it will not turn


follow the power cord and just check the input fuse if you've got a surge protector on it it may have just blown the fuse from a spike. It doesn't hurt to try. This fuse is inside the tv.

Sep 15, 2009 | Sony Grand WEGA KF50WE610 50" Rear...

2 Answers

Pioneer PDP - RO6U Plasma: Says starting up, please wait when turning on. Can't get past this screen. I have tried unplugging and plugging everything back in and am still getting the same error. Are...


unplug it from the power for one hour. Than Press and hold the power button on the on the TV for 20 seconds(It wont show anything. Than Release the power button....

After that plug the power and check the same...

Sep 14, 2008 | Pioneer Projection Televisions

3 Answers

I have had a Hitachi 42" Plasma screen TV for almost 3 years and recently it has had problems. When you turn it on, the TV only stays on for about 10 minutes, and then the screen goes black with the...


The signal from the STU to the Hitachi box is going in the wrong direction.
Is the adaptor that you have switchable? If so, flick the switch in the
other direction and this will fix it. If the adaptor is not switchable get
one that is. Then set the STU output to RGB.

Hope this Helps. -CA

Jul 14, 2008 | Projection Televisions

1 Answer

I have a Pioneer PDP 60 inch plasma tv and I just recently noticed a thin line just right of center that starts at the bottom of the screen and goes straight up about 12-15 inches long. When certain colors...


This is Most likely a small crack in the screen the color is actually from the plasma it cant be fixed by yourself but i would reccomend checking the warranty or try taking it back

Nov 24, 2008 | Projection Televisions

1 Answer

I have a pioneer 50 inch plasma model no pdp507xda i need a new screen how much will it cost cheers


part #AWU1316 Pdp Service Panel it is listed as no longer avaible because they do not sell the pdp to the public or non service centers
sorry
scott

Nov 04, 2008 | Pioneer Projection Televisions

1 Answer

I just brought a 50 inch pioneer plasma and after having installed it correctly the system will not turn on. i have followed all of the steps in the back of the mannual under "system can not be...


then it is defective and you should take it back and get another one , this does happen from the moving of the tv's before they are sold

electech

Oct 30, 2008 | Pioneer Projection Televisions

1 Answer

Plasma model pdp-433pu loud pop thin no picture now 4 or 5 red blinking lightthin stop for about 15 sec


Sounds like it could be a power supply.
let me know if you want to sell it.
naturboy-at-ufl-dot-edu

Aug 26, 2008 | Pioneer Projection Televisions

1 Answer

Pioneer plasma media receiver problem



The Pioneer multi media reciever box is only serviceable from the manufacture. They should have authorized service reps that they equiped to do service for Pioneer devices. They normaly change boards to service it. The regular service man would only be able to fix a simple cold solder connecton or fix some other simple part of it.

Contact the place where you bought it to find out about servicing it. You may find it cheaper and easier to simply replace it completely. It is very possible that there is no service support for this box. Get an estimate before accepting to service it.

Most of the small electronics of today are throw-away anyways...

Jerry G.

Apr 13, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

zorbrack

Level 1 Expert

19 Answers

Are you a Pioneer Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...