Question about Frigidaire Affinity ATF7000E Front Load Washer

1 Answer

Shacky washer i have a frigideire affinity and i ballanced out on its stand and when irun a load of cloths threw it it shakes like crazy and i do have it ballanced what can i do to stop it

Posted by on

  • 4 more comments 
  • noisyone Jul 21, 2008

    Mine is on concrete floor. And when it spins, it wobbles so much that it manages to unplug itself. Does anyone have any solutions about that?

  • hildecj Aug 26, 2008

    when it goes to the sspin cycle it bounces all over the place and will eventually unplug itself. Some oone said a pedistol would help is this true? I am about ready to back to a traditional machine

  • rwgray01 Sep 11, 2008

    2 identical units, both on trussed floors.

    Balanced and level - checked several times runs wobbly even when empty

  • Anonymous Oct 20, 2008

    My front loader I've had since June and have only been able to use it maybe 5 times due to it shaking so bad. We removed the shipping bolts and re-enforced the floor and still nothing. We also have the pedestals and still shakes like crazy. I don't know what else to do. I really am very disappointed with this and regret spending as much as I did and have to do laundry at my in-laws

  • benham May 11, 2010

    Is it on concrete or a "main floor" with floor trusses?

  • robert samples May 11, 2010

    how old is it



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try taking the yellow shipping bolts out of the back of the washer that hold the drum in place while shipping. f

Posted on Sep 29, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My frigidaire affinity front load washer buzzes and will not cycle what wouldcause that?

Good Morning Friend,

I see that your Frigidaire Affinity washer, model# ATF7000E, is buzzing and will not cycle. Some possible causes of this could be:

-Your washer is overloaded with clothes. Try taking some clothes out and restarting.
-There could be an article of clothing that might have slipped in between the gasket and the drum that might be stopping the drum from spinning. Check to see if there are any clothes that might be missing and possibly stuck between the drum and gasket.

If you have tried the above solutions and are still having trouble, I suggest giving your washer a hard reset. You will do this by either unplugging it or shutting the power off at your home's circuit breaker for 2-3 minutes. After the time has passed, restore power and start a cycle. If your appliance is still buzzing and not spinning, I suggest that you contact your local authorized technician for further assistance. They will be able to diagnose your washer and determine the cause of the buzzing and why it is not spinning. Hope this is helpful.

-Best Regards-

May 05, 2014 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

My Frigidaire affinity washer leaks water into the washer stand. Whenever I open the drawer after washing a couple of loads there's water in the drawer.

That's what I thought was wrong with mine to I had 1.75 in change and a piece of a wash clothe in the screen. I toke all that out and it still leaked. Took it apart further and found a piece of the weight that is made out of cement broke of and rubbed through the drum. That sounds like junk to me!!!

Oct 30, 2012 | Frigidaire ATF6000ES Front Load Washer

1 Answer

How to fix a shaking washer bosch 100

there is no special ballancing act that they do.... there is only heavy springs that try to keep up holding it straight. maybe one is wore out or you just simply overloaded it

Feb 04, 2012 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

A lot of water standing in washer. clothes are clean and spun, the water seems to increase each time.

You have have some debris in the drain boot. Remove the back access panel on the washer. Look on the bottom of the tub and you will see a hose (boot) the comes off the tub going to the pump. Remove the boot and clear any debris that may be hampering the draining. Also, while you have the boot off, stick a finger up into the tub to check if there may be a small article of clothing that may be blocking the drain hole.

Feb 12, 2011 | Frigidaire Affinity ATF7000ES Front Load...

2 Answers

Ge WASHER WHRE5260E shakes violently and makes loud noises during spin cycle

the cloths in the washer needs to be ballance... too much load on one side

Nov 14, 2010 | GE WHRE5260E Top Load Washer

1 Answer

Washing machine is not ballanced. every load

There is a balance spring that keeps the machine balance. it broke or rusted and came off. Lean the machine back 45 degrees and look under
you should see the spring. reattach the spring to the base and the back. (you need to look at a manual if you dont understand) but try your best

Mar 22, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Door lock doesn't release automatically; clothes still very wet


You need the Factory Repair Manual for your Affinity Washer. There is alot that can go wrong with these machines and you will need to run the washer through its diagnostics.

Here is a Link where you can Download the Affinity Washer Repair Manual


Jan 07, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Washer shakes violently

The drum mounts to a spindle on the back. On these units, it is common for the tripod mounts for this particular design to crack and break. On every call I have had for a terrible vibration on these models, this has been the problem. The remedy is to replace the front and rear tub, as well as the basket. It is also recommended that you replace the drain pump at the same time. Most of this should be covered under at least a parts warranty.

Oct 25, 2008 | Frigidaire Affinity ATF7000ES Front Load...

1 Answer

Frigidaire Affinity e 25

dip as much water out as possible remove bottom panel remove hoses from pump ckd hoses and pump for blockage

May 21, 2008 | Frigidaire Affinity ATF7000ES Front Load...

Not finding what you are looking for?
Frigidaire Affinity ATF7000E Front Load Washer Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides