Question about Projection Televisions

1 Answer

Been given a sagem ITD62 freeview box from inlaws, only no manual available and dont know intallation code?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi exactly same problem donated box and no manual for code. help!

Posted on Jul 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you tell me how to tune in a channel when ppreparing to use a freeview box on a onyx sw 1536 ld


Unless you've got an "expensive" Freeview box that modulates its output on to the RF (Aerial) connector then you can't. Most Freeview boxes have 2 aerial connectors - 1 IN from the Aerial itself and 1 OUT to connect to the TV - BUT this is ONLY a PASS-THROUGH connection. This means that the digital Freeview signal which is decoded from the aerial signals is NOT output on the OUT connector and sent down the co-axial cable to your TV. Only the "old" ANALOGUE (not Freeview NON DIGITAL) comes down that co-ax. What you should do is connect the Freeview box to your TV with a SCART cable via the SCART connectors on both. You need to select the AV input on the TV using the remote.
Even if you do have an "expensive" box that does modulate the digital decoded programmes and output these of the RF OUT connector, you should still use a SCART cable as the picture produced will be far better
Hope this helps

Jul 06, 2010 | Projection Televisions

1 Answer

My freeview player will not let me retune it, it haws a pin code block!!!


If you havent selected a PIN yourself, then it should still be the default.

The manual that came with it will tell you the default, but if you dont have the manual anymore, defaults commonly are 0000, 1111, 1234, 9999.

If you have set a PIN but cant remember it, somewhere in the menus is usually a "reset to factory defaults/configuration" that may reset the PIN back to the default. Otherwise, you'll just have to keep guessing your PIN !

Nov 09, 2009 | Projection Televisions

1 Answer

Cant retune my digtal freeview as my picture keeps freezing


The retuning process is as follows:

  1. Press the [i+] or MENU button on the remote control to display the DIGITAL INFO menu.
  2. Press the BLUE button to display the MAIN MENU.
  3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
  4. Press the RED button to start the auto tuning process for all available digital channels.
  5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Jun 02, 2009 | Samsung HL-S5086W 50" HDTV

1 Answer

I need a remote control code for my nikkai a88jb freeview box so that I can programme a universal remote control. Any ideas?


my nikkai a88jb after connected still come up with "empty data base" . no signal of anything showing and i did plug in antenas! pls what shoul i do?

Apr 18, 2009 | Projection Televisions

2 Answers

Panasonic TX28DTM1 can see picture through a blue hayse on digital freeview The analogue picture is OK


So what is your problem it looks like a statement . Specify your problem clearly with necessary details .

And old is your tv and have you faced any problem or replaced any component recently .


post back these details



Oct 04, 2008 | Panasonic Projection Televisions

1 Answer

Ref sagem itd 612 will download 89 tv and only 1 radio and every few minutes graphics display other chan have been detected. keep trying but to no avail.


Allow the box to re-scan. when prompted to 'save' new chans select 'no' and 'ok'

This will produce your prior scan results with all the progs.

You may have to do this each time you bring it out of stand-by, but only takes a few mins.

Let me know how you get on at aerialsat@hotmail.co.uk

Regards, Chris Hewson.

Aug 14, 2008 | Projection Televisions

2 Answers

Do not understand how to set up my alba digi box to my television and recieve basic digital channels help!


Hi.

Ok
1) plug aerial in to the antena in sock on freeview box.
2) plug short aerial type lead in to rf out socket on freeview & antena in socket on TV.
3) plug A scart lead in to the socket marked TV on freeview box & the other end of scart in to one of the scart sockets on the TV.
If your TV has more than one socket plug it into the one marked AV1 or AV2.

4) plug in freeview to mains electricity & switch box on.
5) Turn TV on freeview should appear automatically if it doesnt look on your TV remote for A button marked AV or a button with either A circle or square with an arrow going through it you may need to press this several times until you see digi picture come up.
Thats basically it but do check that you dont need a new aerial etc to be able to get digi signal in your area.

http://dysonmanuals.llc.nu/

Jul 26, 2008 | Projection Televisions

1 Answer

After attaching a freeview box to my Acoustic Solutions LCD32NK750HD 32" inch LCD HD TV the picture started to scramble and **** about the screen, this would stop when I turn the TV off and back on...


How have you got freeveiw connected to your set and what input are you using?
when connecting the freeveiw unit to the tv did you have the power connected and turned on to either tv or freeveiw?
how many sets are connected to the freeveiw unit,
All these things can affect this equation,

it sounds like the set had a power surge from the plugging in of the freeview,
the f connection output from the freeveiw set has a live voltage feed that powers either the mast head amp or the balun in the center of the dish,
for these to work correctly the cable between the freeveiw and the aerial/dish needs power,
this annoying little fault can only be remedied by taking it to the repair man,

Let us know the outcome thanks ,
hope this helps,

Jul 19, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...