Question about Fisher Audio & Video Receivers

Open Question

I have rs-9005 stereo receiver i turn power button on and nothing shows on screen

Posted by on

2 Suggested Answers

  • 4234 Answers

SOURCE: My Technics stereo system ...the display screen shows nothing

The question is, do you hear any sound? Is just the display off or is the entire unit shutdown? Can you tell?

These displays are known to develope poor solder connections at the power input and ground pins. If you can solder, open up the unit (unplugged of course) and examine the pins for the display. This will be on the PC board attached to the front panel. The pins at either end of a long line of pins will be the power and ground pins. Reasolder those pins, taking care not to short the pins together and try the unit once done. If that does not resolve the problem (assuming it is just a display problem), update this with as many details as you can about the behavior of the unit and we'll look further.

Dan

Posted on Nov 18, 2009

Audioaholic
  • 376 Answers

SOURCE: Happy new year! my

if its a new purchase with a warranty, then take it to them first to prevent any loss of coverage, and if not open it up and check for a round cylinder glass fuse, or white ceramic fuse, possibly might have blown it.
good luck!

Posted on Dec 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yamaha R-S700 has no audio all channels, it will power on but no audio on any channel.


Have you checked all your speaker connections? And your Speaker selection a-b? If yes then Does your volume indicator show the volume increase when turning the volume up? If so, then try a different speaker . To check your speakers you can take a 9v alkaline battery and momentarily touch the leads to each speaker after disconnecting them from the stereo(black is ground and the striped wire is positive) You should hear a thump from the speaker.
Or just check them with another stereo or sound source. If the speakers are ok then you have a problem with the amplifier section of the receiver. There are no fuses internally in the Yamaha RS-700

Oct 03, 2014 | Audio & Video Receivers

1 Answer

Stuck in standby mode on Fisher RS-911A receiver


Does it power up or straight to standby? If it is on but in standby it could be speaker protection issues...check speaker wires and/or speakers for issues. If it's straight to standby and no power, it's repair shop time.

Jan 02, 2014 | Fisher Audio & Video Receivers

1 Answer

Fisher receiver rs 737


No answer, but...
I have a similar problem... I can power up my rs-911, then about 3-5 sec. later, it shutsdown (standby light still on)... What in the tarnation is going on? All 3 fuses are OK.?.

Nov 18, 2013 | Fisher Audio & Video Receivers

1 Answer

Stereo receiver won't turn on


It may be a bad power cable or on/off button.

May 06, 2012 | Audio & Video Receivers

3 Answers

How do I reset my yamaha receiver htr5730


http://www.retrevo.com/support/Yamaha-HTR-5730-Receivers-manual/id/1075bh230/t/2/

Page 52

1 Hold down STEREO on the Front Panel
"Factory Preset" appears on the front panel
2 Press STEREO to select the desired setting.
'Reset' To reset to factory presets
'Cancel' to cancel without making changes
3 Press STANDBY/ON to confirm your selection

Jan 15, 2011 | Yamaha HTR-5730 Receiver

1 Answer

Happy new year! my problem is that the stereo turn on but no sound. my stereo receiver is a fisher studio standard AV STEREO RECEIVER. RS-616


if its a new purchase with a warranty, then take it to them first to prevent any loss of coverage, and if not open it up and check for a round cylinder glass fuse, or white ceramic fuse, possibly might have blown it.
good luck!

Dec 30, 2010 | Audio & Video Receivers

1 Answer

Standby flashing


Thats the protection circuit kicking in, overheating is rarely the problem, check your speaker wires for shorts. If it does that with nothing connected you have a bad amp board :(

Cheers,

Sep 12, 2009 | Denon AVR-95 Receiver

1 Answer

Yamaha R-700 Natural Sound Stereo Receiver won't turn on.


My stereo receiver aiwa MX-NH2000 can not turn on. It has standby.

May 03, 2009 | Yamaha Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher Audio & Video Receivers Experts

Cindy Wells

Level 3 Expert

4751 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Lawrence Oravetz

Level 3 Expert

7565 Answers

Are you a Fisher Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...