- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Please clean the gold contacts of your memory card.Take any lead pencil. Take the eraser and rub it on the gold contacts
on the memory stick as if you are erasing writing on paper. Do this for
about 30 seconds or more until you get all the gold contacts. Put the
stick in the camera, switch to 'Setup', then turn the camera on. The
'C:13:01' error will automatically disappear. At this point, quickly
format the memory stick using the camera's format feature.NOTE: Al;ways use the camera's built in function to format your memory card.Do not use the computer to format the memory card.
If you still face any problems then you will have to get it repaired.
I experienced the same problem. I did not updated the firme ware because my F828 already came with latest version.
To view the firmeare information in your camera you must have the AC power adpater conected otherwise it wont show. This is all I know. From here I think you have only to follow the steps of SONY guide.
Hope I could help in any way.