Question about Washing Machines

1 Answer

Washer Dryer The dryer in this machine is not working properly. I put washing in to dry and instead of doing this it comes out still wet and the whole dryer is full of steam. What do you think is the problem. Unfortunately I have lost the manual.

Posted by on

  • spring3746 Mar 22, 2009

    My machine gets hot but even after 2 hours clothes still wet I called company and only got a letter stating that i should spend another hundred dollars on a waranty. I am extreemly unhappy! Does anyone have a solution. It washes very well!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,462 Answers

Washer dryers work by using a fine jet of cold water to condense the steam from your clothes drying. therefore, water has to be turned on when in the drying mode. make sure water is on.
after that, if water is in fact turned on, then the fault will probably lie in the valve being open circuit

Posted on Jul 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drying problem -


sounds like you have a washing machine problem , maybemore than a dryer . clothes should not be ringing wet from a washer ever.

Jan 20, 2015 | Malber WD1000 Front Load Washer/Dryer

1 Answer

I have jst purchased this washer today, however the dryer takes ages,,,,,,their seems to be water going in when its drying, clothes come out hot, but still as damp as when i put them into dry.


Hi, this is normal for a washer dryer, water isn't actually going in, it is condensating and then being pumped away.

when you use the dryer program your are only meant to put half the washing load or less in at a time if there is too much wet washing in the machine it will take forever to dry as it cant get rid of the amount of condensation quick enough so some of it is reabsorbed into the clothes and so it goes on.

so the trick is only to put in a maximum of half the full washing load.

Hope this helps.

Feb 11, 2011 | Hotpoint Ariston WD440G Front Load...

1 Answer

Instruction Manual for Hotpoint washer dryer wd420


Try this link:
http://www.hotpointservice.co.uk/hs/pages/manual/manual/search.do

Enter the model number in the search box, and download instructions.
Please rate my solution.
Thankyou.

Mar 02, 2009 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Wet towels & blankets stacked on working dryer


This won't affect drying time unless the load is so heavy it causes the cabinet to warp and disturb the door seal. If you haven't had any problem with this so far you can probably keep doing it. (The machine is designed to support the weight of a wet load in the drum, and should have some safety margin. But why not invest in a roll-around laundry cart like you find at laundromats and keep the wet load there until the dryer is clear?) You might need to be more concerned about rust starting on the top of the cabinet if the enamel is scratched, since it's not usually subjected to wet loads being piled there. You should also check your vent pipe frequently to make sure it stays clear with all the drying you do. Clogged lint screens and vent pipes will definitely lengthen drying time.

Feb 18, 2009 | Frigidaire FLEB8200DS Top Load Stacked...

1 Answer

How do you DRY with the Haier washer/dryer


Have you tried lengthening the dryer cycle or running it at a higher temp? The usual culprit for wet clothes is not running a dryer long enough or hot enough. (I remember some stand-alone dryers (coin-operated with a fixed drying time per coin) that needed two cycles to dry stuff.

Jul 12, 2008 | Haier 14.3 lb. Washer/Dryer Combo

2 Answers

My indesit widl126s


my washer works fine but the dryer wont heat up or dry the clothes it goes onto dry but all the clothes are still coming out wet and the drum is cold

Apr 01, 2008 | Washing Machines

1 Answer

Broken washer/dryer


This sounds like a motor control board is faulty. Please load a couple of towels in the machine run it. Watch the machine as it goes through its' cycles.

1. Do the towels tumble when the machine is washing ?
2. When it begins to spin, does it spin one way at a fast pace or does it spin one way and then the other ?

Answering these two questions will help in troubleshooting your problem.

Jan 07, 2008 | Kenmore Elite 45986 Front Load Washer

2 Answers

Not drying


Is it still under warranty? I've read that these machines are better left at the retailer...

Dec 08, 2007 | Hotpoint Aquarius WD640 Front Load...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...