Question about Belkin Wireless-N Wireless Router with 4-Port Switch

1 Answer

Ntl:Home Compatibility Attempting to set up a wireless network. Networking works fine but whenever I connect my 'Ntl:Home 200' broadband modem the router doesn't seem to want to register it as working. I checked that the modem is working fine on its own so I'm at a loss.

Posted by on

  • SteHarris Jul 09, 2008

    The router is set to Dynamic IP by default. I've tried it with the mac address cloned and uncloned.

    Also tried using the first computer as a gateway rather than running the broadband through the router but that didn't work either.

    Beginning to think it might be an issue between the two pieces of hardware, but I couldn't find anything about it online.


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 287 Answers

When you say the networking is fine, I assume that you can connect all wireless devices together and access the router menu on IP 192.168.2.2 (refer page 23)

Is it possible that when you connect the router to the modem that both are trying to assign an IP to the other?

My router is set to get it's WAN IP from the modem (it's a d-link though)

refer to the manual on page 28- try setting the WAN/internet setting to dynamic. You should leave the host name blank and not clone the MAC address.

MANUAL

Post back results and I will try to assist further if required

Posted on Jul 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Direct access through LAN cable internet was working fine. whereas while connecting through DLink(Dir 600) pages were not loading correcly. I tried Netgear modem it was working fine. What is the probl


I would contact your ISP for help with this one. It should work but you would want to check the LAN and WAN settings to make sure they work on the network since there have been changes.

Aug 31, 2014 | D-Link Dlink Dir-600 Wireless Router...

1 Answer

How to use cwa-854 other than bridge mode?I would like to have an internet access point obtained with user name and pasword where i can conetct more than one comp (ip obtained automatically)?


Two aspects have to be considered to establish a network with brideable functions

1. The computer infrustrure have to be built, for example the computers have to be connected to each other by physcal cables to achieve the first steps the the second steps requiring wireless functionality.

2.The wireless devices like modems transfer signals between the two device to communicate otherwise would have communicated by wire connectivty of cables. The wireless device creates a bridge between the two devices also called an access point located on the computer networking area ( open my computer, click system settings and select networking functionality for any alteration purposes)

3.Once each device in the connection is ready functioning, the access point becomes visible message that could be manipulted by the computer administrator.

4. Clicking on the system networking settings will allow customisable features explanable

a. The network area would have the option of creating passwords to every device for reasons of that each device on the network is a separate entity only possible to achieve connectivey by another device providing wireless capability.

b. manipulate the wireless features that would only be displayed after each gadget on the infrastructure has been phically connected with wires amongs one another and to power supply in which instance to be powered on.

c. the modem once powered on should recognise an available computer physical establishment because wireless chips are embeded in every entity of the setup.

d. The computer display of message about wireless signal recognistion is then manipulated to suit the administrators specifications explanable.

1. A user name and password are established for reasons of contolling access to the connection of several devices

2. The device could function without passwords and username only becomes available to every demander making possible connectivty so several untilities and infructure.

Important notes

1. Your computer set up of networks are a network that when capable of communicating elswhere with additional networks insfrustures together is an internet.
2. Rememer to setup your newkwork properly or esle access could not be made into another network and vise versa.

3. If you set up any passwords and user names in the process of establishing a network,, other persons requiring connectivety woudld requrre what is called Codes in computer temnology to acess the network. whenever the passwors are lost would compromise your acess to the link of wireless signals as well.


Dec 02, 2010 | Cnet CWA-854 (CWA854) 802.11b/g Wireless...

1 Answer

My belkin n series keeps losing internet connection hard wired to my computer and three wireless computers in the house. when hard wired to the virgin broadband modem everything works fine


I would suggest taking a look at your modem LEDs. What happens exactly when you lose connection? A look at the LEDs should give you some thought as what might be causing this. You can also try resetting your Belkin to default factory settings by pressing the Reset button at the back for 30 seconds, and then putting back your Belkin settings.

Nov 16, 2010 | Belkin N1 Wireless-N Wireless Router

1 Answer

The wireless network is being picked up by the laptops in the house, but there is no internet connection between the modem and the router. MY router is a Belkin G Wireless


if you connect the computer directly to the modem, does it work?
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

Mar 06, 2010 | Belkin Wireless-G Plus MIMO Router with...

1 Answer

Connect D-Link DWL-G700AP to dreambox decoder


you can connect to your box via FTP via a crossover cable. If you can’t, you might want to read up on that before attempting this.
Now, what we’ll need is…
Ethernet cable (crossover or patch)
Router
Modem
We’ll also assume that you have a router (wireless or not) and that your modem is connected to the ‘Internet’ or ‘WAN’ port.
If you have a free port on your wireless router, you can connect your dreambox to this. Use the ethernet cable (crossover or patch, most modern routers will accept either) connect one end to your dreambox and one end to a free port on your router. You don’t need to change any settings on your router or PC.
Over to the dreambox. Navigate to the networking page on your dreambox.
Setup -> Expert Setup -> Communication Setup

Dec 09, 2009 | D-Link DWL-G700AP (S2984376) 802.11g/b...

1 Answer

We had to replace our modem & our wireless router isn't working


You have got a new modem. You will need to change the settings of the router according to the new modem.
First make sure that your computer is able to go online when connected directly to the modem. If that works then connect the computer to the router and the modem to the router.
open the set up page of the router and set up the router.

Click here for more info

Nov 28, 2009 | Dynex Wireless-G Broadband Router

1 Answer

The modem light is flashing when all others are solid


whenever ur noderm light flashes then it means that there limited or no connectivity at all so plz try configuring or try checking the moderms ip and see if that solves the problem

Apr 07, 2009 | Dynex Enhanced-G Wireless Broadband Router

1 Answer

Wireless signal keeps dropping/dissapearing


Check my tip
Using Router and Wlan adapter from different brand (Dynex + Belkin) is sometime calling for trouble: you must configure both to be sure to be on same standard (or change Both).
I'm using Netgear + Belkin and tune is not easy
On router config check radio power, reduce the used standard (B/G A/N) to the only one used by Belkin adapter (N).
Be sure you removed Windows zero wireless configuration (= use windows to manage my connection= OFF)
edit your belking wireless networking utility to automatic reconnect:
moz-screenshot-1.jpg
9db77e5.jpg

try downgrading to G standard from router side
Check your network connection plugging your laptop to router via lan cable.and check network params (DHCP DNS etc.).
Then check wlan connection near router, if you experience wlan drops only when far from router, find any possible interferences source (Microwave, cordless, remote) remove it or be ware you cannot have wlan when your wave is working.

Dec 13, 2008 | Dynex Enhanced-G Wireless Broadband Router

1 Answer

Trouble setting up work laptop to use Internet thru home computer


Do you have any firewall installed on your computer?
If so, try disabling it. If it doesnt work, keep going.

does your modem have a green light on the "internet" or "activity" status? if not, you have a problem in your modem.

hope it helps.

Aug 07, 2008 | Belkin (F5D7132) 802.11b/g Wireless Access...

1 Answer

Networking


You actually have a couple of issues here. Fix these in this order. 1.) Login to router and turn off wireless (if you're not wanting to use wireless) 2.) Connect the ADSL modem CAT5 port to the WAN port of the Belkin router. 3.) Login to router and turn on NAT and make sure DHCP is enabled. 4.) On your Windows machine turn on DHCP under the network settings. This should allow your connection to be setup automatically and stop wireless access on the Belkin router. Let me know if you need more help. JC

Jun 24, 2006 | Belkin Wireless (F5D7130) 802.11g/b...

Not finding what you are looking for?
Belkin Wireless-N Wireless Router with 4-Port Switch Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Wireless Access Points Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Are you a Belkin Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...