Question about Dryers

3 Answers

Whirlpool AWZ 650 condenser dryer is not heating - cold air only

Posted by on

  • 4 more comments 
  • Anonymous Aug 06, 2008

    I have the same problem.



    Drier not heating - could it be the heat exhanger?

  • tonycaf Aug 21, 2008

    Not heating blowing cold air only, water condenser light is on when empty

  • Anonymous Sep 21, 2008

    have the exact same problem

  • walshfamily Nov 23, 2008

    Have to same problem ie only cold air so not drying & the filter light comes on when both filters & clean.

  • Niggles Nov 28, 2008

    I have the same problem, whereby only cold air blows and the filter light is on all the time.

  • Anonymous Nov 29, 2008

    I have the same problem...anyone know how to fix it?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

MY FILTER LIGHT IS ONN ALL THE TIME, HOW DO I CLEAN THE FILTER...WHERE IS IT, IS IT THE ONE BELOW THE FRONT DOOR THAT PULLS UP AS IN THAT CASE I'VE CLEANED THAT?

Posted on Aug 27, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Attached to the sucket but no lights and not working

Posted on Dec 06, 2012

  • gen sian Dec 06, 2012

    my whirlpool condenser just almost 2 months suddenly stopped .and i tried to put it on it wont work anymore.what do you think the problem and how it will work again.hope you can help me.ty

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same problem

Posted on Nov 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool AWZ 410 washer dryer is not generating any hot air when drying. The dryer drum is tumbling but with cool air only.


Unplug the unit and take the top with the screws holding the lid on. Take a look at all of the wires on the top of the machine. You might notice broken/burnt wires on the safeties that are close to or that directly activate the heating element located in the blower housing located at the top of this washer/dryer condensing unit.

Nov 26, 2013 | Whirlpool LER4634J Electric Dryer

1 Answer

Whirlpool AWZ-7813 won't dry - no heat


it will either be you element or the thermostats that have failed.

Mar 20, 2010 | Whirlpool Dryers

2 Answers

HOW DO I LOCATE THE HEATING ELEMENT ON THE 6TH SENSE DRYER


take the back panel off it is located in the rear.

Mar 19, 2010 | Whirlpool Dryers

2 Answers

How to clean a whirlpool awz7913 condenser tumble dryer heat exchanger


how do i clean my heat exchanger on the whirlpool awz 7913 condenser tumble dryer?

Jan 19, 2010 | Whirlpool Dryers

2 Answers

Whirlpool tumble dryer model NO- AWZ 121/3-belt replacement


how do i replace my belt on my tumble dryer

Jan 09, 2010 | Whirlpool Dryers

1 Answer

Whirlpool AWZ 7303 tumbling but not drying.


blower wheels will get loose in dryers. Sometimes they will get a whole lump of lint in them or you can hear a rattling noise in the dryer, this is the blower wheel, its worn out and it can cause the fuse to blow too,or it can half *** work and take fifty forever's to dry the clothes.Or it could be just that the dryer needs a good blowing out .I use a lawn blower to get all the lint out of the dryer as well as the vent pipe and vent to outside. I take the filter HOUSING out and wash it also. That is, I remove the housing and clean is good! Making sure that the dryer is properly flowing air is a good thing!

Sep 11, 2009 | Dryers

1 Answer

Door latch broken on my Whirlpool AWZ 650 dryer


it is very easy to replace you just have to lift the top to press the clip and push it out please rate

Jan 03, 2009 | Whirlpool LER4634J Electric Dryer

1 Answer

Condenser dryer not getting clothes dry


There must be one or two circuit breakers, usually at the back of the dryer, check them out.

If this does not fix the problem, then possible faults are the thermistor or the heating element.

Most likely you will need to have the heating element replaced.

If you decide to call a technician you can use the phone number listed on the owner manual.

You can find parts and diagrams here.

See also this website, the also sell parts and have some schematic: What is wrong with your Dryer?

Nov 05, 2008 | Whirlpool LER4634J Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

2,101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...