Question about Dryers

1 Answer

My dryer displays E1 code???? - Dryers

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 525 Answers

Warning! To avoid personal injury or even death, always disconnect your appliance from its power source--that is, unplug it or break the connection at the circuit breaker or fuse box--before you do any troubleshooting or repair work on your appliance. Also, because some components may have sharp edges, use caution while working on your appliance.

Below is a link to common solutions that will help you with parts and diagnostic procedures that are specifically tuned to your manufacturers data plate information.
It provides exploded view imagery, belt routing diagrams, parts imagery and function, parts ordering and shipping information, error code details, just about anything you need to get your appliance up and running again. Once you access the site you will be able to navigate numerous pages of information on your product. You will need to enter your model number to access your product information.

http://www.repairclinic.com/0078.asp

Tip: Always provide the complete information provided on the manufacturers product information data tag, located on the unit, and not in the user’s manual. This will help you acquire a more accurate and expeditious response to your complaint. I will post the most common solutions to your complaint. For more specific information please refer to the tip and/or link provided. Here are some things to look for:

If my assistance helped resolve this issue, please show your appreciation by rating how effective my advice was in resolving this issue.
Thank you,
Dave E. (Illeagle)

"Your satisfaction is my personal reward"

Posted on Jul 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error E1 for washing machine


Lots of info on E1 for different makes.

  • How to repair a Samsung washing machine with error code E1 ... https://www.quora.com/How-do-I-repair-a-Samsung-washing-machine... How do I repair a Samsung washing machine with error ... If your Samsung Washing Machine is showing error code E1 then ... How do I clear bosch washing machine error ...
  • E1 error in washing machine? ' Yahoo Answers https://in.answers.yahoo.com/question/index?qid=20131129013237AA7oiKP
    • RESOLVED
    • 7 POSTS
    • 6 TOTAL ANSWERS
    2013-11-29 · E1 error in washing machine? ... Haier washing machine error code E1? LG Wave Series Washer LE error message? Washing machine error code? ...
  • My washing machine is displaying an error code. What does ... www.samsung.com/my/support/skp/faq/1033803 My washing machine is displaying an error ... E1. Water supply error. ... · Check that the level of the drain hose is not lower than the base of the washing machine.
  • Related searches for Error E1 for washing machine
  • Samsung Washing Machine 4E and E1 Fault - Help & Advice https://www.northlondonappliancerepairs.co.uk/error-codes/samsung...
    • 4.3/5
    • 46 RATINGS
    Samsung Washing Machine 4E and E1 Fault. Samsung washing machine Not filling in allocated time error code 4E and E1 Fault.
  • Help & Troubleshootings - Haier ZA Products Website www.haier.com/za/help_and_troubleshootings/faq/washing_machine Help & Troubleshootings. ... Too much water in the washing machine ... Error Code-control panel display "E1" Question : Error Code-control panel display "Lock"
  • Samsung washing machine error code 4E and E1 Fault Not ... www.youtube.com/watch?v=cFlnxeB0P0g
    • BY HOW-2-REPAIR.COM
    • 9 MIN
    • 19K VIEWS
    2015-11-24 · Video embedded · ... machine-error-code-4e-and-e1-fault-not-filling-in-allocated-time/ Samsung washing ... Samsung washing machine error code 4E and E1 ...
  • Samsung washing machine error code 4E, E1, Fault Not filling www.how-to-repair.com/help/samsung-washing-machine-error-code-4e... Samsung washing machine Not filling in allocated time error code 4E and E1 Fault This is essentially a fill timeout error which will normally mean that either the ...
  • Hoover error code E1 - White Goods Help www.whitegoodshelp.co.uk > ... > Washing Machine Error Codes Hoover error code E1. ... You need to watch the washing machine to see when it aborts to get an idea which of the three areas to look at.

  • Jul 01, 2016 | Washing Machines

    1 Answer

    E1 code. water is being pumped out dry and start dryer and 3-5 min code comes back. cleaned everything inside checked all hoses and switch. everything looks fine


    Cycle is interrupted and ''E1'' appears in display.

    Condensate hose is blocked in some way. Turn off dryer and check hose.
    Condensed water not pumped out (WTL 54 condensation models only). Pump failed.

    25808741-gtkp3url2ghtdqenstp5bokb-1-0.jpg Dado

    Aug 04, 2015 | Bosch Axxis WTL 5410 Electric Dryer

    1 Answer

    Dryer will not start display works, when i push the start button it just beeps and does nothing, shows a E01 code.


    Hi, this is what the error code means,

    E1 or E2 Thermistor Failure The dryer will not operate if the exhaust temperature drops below 18 degrees F. or exceeds 250 degrees F.

    When the thermistor circuit is open (>50K ohms), the error code E1 flashes in the display.

    When the thermistor circuit is shorted (<500 ohms), the error code E2 flashes in the display.

    Normal thermistor resistance values:
    60 degrees F. - 15.3K ohms.
    70 degrees F. - 11.9K ohms.
    80 degrees F. - 9.2K ohms.
    Hope it helps.

    Jan 19, 2011 | Whirlpool GEW9250 Electric Dryer

    1 Answer

    E-1 CODE


    Hello there
    This code can sometimes be the e-1 or sometimes the e-2 here is the descrioption of what it means
    E1 or E2 Thermistor Failure The dryer will not operate if the exhaust temperature drops below 18 degrees F. or exceeds 250 degrees F.

    When the thermistor circuit is open (>50K ohms), the error code E1 flashes in the display.

    When the thermistor circuit is shorted (<500 ohms), the error code E2 flashes in the display.

    Normal thermistor resistance values:
    60 degrees F. - 15.3K ohms.
    70 degrees F. - 11.9K ohms.
    80 degrees F. - 9.2K ohms.Dryer thermistor assembly
    f2e3f51.jpg

    Jul 27, 2010 | Whirlpool GEW9200L Electric Dryer

    1 Answer

    Code E1


    E1 or E2 Thermistor Failure

    The dryer will not operate if the exhaust temperature drops below 18 degrees F. or exceeds 250 degrees F.

    When the thermistor circuit is open (>50K ohms), the error code E1 flashes in the display.

    When the thermistor circuit is shorted (<500 ohms), the error code E2 flashes in the display.

    Normal thermistor resistance values:
    60 degrees F. - 15.3K ohms.
    70 degrees F. - 11.9K ohms.
    80 degrees F. - 9.2K ohms.

    Take the top off the dryer and inside you'll find the "tech sheet." It has instructions for removing the front panel and locating the thermistor.

    Apr 21, 2010 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...

    1 Answer

    E1 code on kenmore front load dryer


    Hello there
    I have written a list of codes that should cover your problem nd give you some idea what to check ok
    E1 or E2 Thermistor Failure The dryer will not operate if the exhaust temperature drops below 18 degrees F. or exceeds 250 degrees F.

    When the thermistor circuit is open (>50K ohms), the error code E1 flashes in the display.

    When the thermistor circuit is shorted (<500 ohms), the error code E2 flashes in the display.

    Normal thermistor resistance values:
    60 degrees F. - 15.3K ohms.
    70 degrees F. - 11.9K ohms.
    80 degrees F. - 9.2K ohms. E3 Touchpad or Software mismatch Flashes when there is a touchpad or software

    Dec 16, 2009 | Kenmore Dryers

    1 Answer

    My kenmore dryer is blinking e1 can you tell me what the prolbem is.


    I have a Kenmore Electric HE3 dryer that displays the E1 error code. My husband is good at fixing just about anything so he wants to fix this himself. Is this the Thermistor? Where is it located?

    Sep 09, 2009 | Kenmore Elite HE4 Electric Dryer

    1 Answer

    What is error code e1?


    The E1 displayed indicates the thermistor is open and needs to be replaced.

    The connections can be loose but the most likely cause of an E1 error is a bad thermistor.

    The dryer will not operate if the exhaust temperature drops below 18 degrees F. or exceeds 250 degrees F.

    If you're comfortable and confident in your do-it-yourself skills and have access to a volt/ohm meter you can check and replace this part yourself.

    The thermistor is available from the following: www.searspartsdirect.com

    Enter your model # in the appropriate box to get a full parts break-down and diagrams.

    To access the thermistor see the image below.

    Remember to unplug the dryer from power first.

    The thermistor will have a black and red/white wire on it.

    You can check continuity across it with the meter and if the circuit is open then the thermistor needs to be replaced.



    When the thermistor circuit is open (>50K ohms), the error code E1 flashes in the display.

    When the thermistor circuit is shorted (

    Normal thermistor resistance values:
    60 degrees F. - 15.3K ohms.
    70 degrees F. - 11.9K ohms.
    80 degrees F. - 9.2K ohms.

    The thermistor -may- check ok when cool and freak out when warm!

    http://media.fotki.com/1_p,wkrsfrgsskrbttbxgtqsskgwtqkq,vi/wbsdwtgwgxwrgbbgsgs/1/1303472/5961857/image6767img-or.gif

    HE3 Dryer: http://media.fotki.com/1_p,wbfbgrrwtrrkfttxgtqsskgwtqkq,vi/kgwgwwwdkxkfkkgwgqs/1/1303472/5961857/image7127img-or.gif


    Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

    May 11, 2009 | Kenmore 73952 Gas Dryer

    1 Answer

    Dryer stops soon afetr cycle starts, E1 appears


    ensure lint trap is clean and venting is not restricted or blocked.

    E1 or E2 Thermistor Failure The dryer will not operate if the exhaust temperature drops below 18 degrees F. or exceeds 250 degrees F.

    When the thermistor circuit is open (>50K ohms), the error code E1 flashes in the display.

    When the thermistor circuit is shorted (<500 ohms), the error code E2 flashes in the display.

    Normal thermistor resistance values:
    60 degrees F. - 15.3K ohms.
    70 degrees F. - 11.9K ohms.
    80 degrees F. - 9.2K ohms.

    Feb 10, 2009 | Whirlpool GEW9200L Electric Dryer

    1 Answer

    I constantly got E1 Error code on my Kenmore Elite H3 GAS dryer


    E1 error code indicates an open thermistor or open thermistor circuit. A thermistor is a component that relays the temperature in the dryer to the control board. If the thermistor has failed, Error code E1 will be displayed.
    You need to call a repair person to fix it.

    Dec 18, 2008 | Kenmore Elite HE4 Electric Dryer

    Not finding what you are looking for?
    Dryers Logo

    Related Topics:

    100 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dryers Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8205 Answers

    yadayada
    yadayada

    Level 3 Expert

    70387 Answers

    Brad Brown

    Level 3 Expert

    15133 Answers

    Are you a Dryer Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...