Question about Heating & Cooling

1 Answer

Vulcan CX Central ducted heating. RE: Following a power outage the control panel does not respond, I have checked the pilot light and it is still on. I need to know how to reset the time and get it to respondwith some heat! It is a friends house and they are not contactable and I cannot find the instruction manual.

Posted by on

  • wendypaul Jul 11, 2008

    The control panel does not respond but the pilot light is on and it is just blowing cold air

×

1 Answer

The control panel gets its power from the central heating unit's power point. Try turning the power off outside at the powerpoint next to the ducted heating unit and try turning it on again after a few seconds, see if it resets

Posted on Jul 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't gas central heater work?


some of the newer gas furnaces do not have a pilot that stays on but auto ignite when the call for heat . the best advice , is to call a professional , in your area and have them check your furnace .

Jan 30, 2016 | Vulcan Heating & Cooling

1 Answer

Pilot lights but won't stay on in my older style vulcan space heater. thermo couple was replaced last year.any ideas that i could try thanks


Most common cause of pilot light problems is air movement. If your space heater exhausts gas through the roof, ensure the cap is on and level. If not, outside air movement will blow out the pilot. If you do not have an exhaust gas duct, check that the unit is positioned so that it does not blow air back onto itself from walls, furniture, etc, and ensure no other devices that move air are aimed towards the unit. The unit also needs to be placed away from central ducting, including return vents.

Hope this helps!

Aug 09, 2010 | Vulcan AUW230A Heater

1 Answer

Can i get a new pilot light assembly for a vulcan cx 90 ducted heater


If you can not,do this,take a piece of 3/16 tubing,and cut it to fit over the pilot light,and make sure the tubing is cut long enough to extend into the flame of the pilot light,this will save you money,and time,most of the time the problem with the pilot light is,that it burns away over time,and does not stay into the flame .If this was helpful,please rate,thank you.

Jul 14, 2010 | Heating & Cooling

1 Answer

Burners on our Brivis Buffalo 52 Ducted heater aren't getting gas


test thermosat for proper operation ie-broken wire-power if good jump stat and check if unit goes on if it does than stat internal problem or wiring problem and needs replacement or repair --if stat good check fan safety/high limit sensor if good would need to check and test thermocouple thats the tube that the pilot flame burns on may be enough to keep pilot burning but not enough to open valve for heat demand

May 31, 2010 | Heating & Cooling

3 Answers

We have a Vulcan Ultra high efficiency gas ducted heating


Gas ducted central heater won't switch on all of a sudden

Nov 04, 2009 | Vulcan AUW230A Heater

1 Answer

I have a similar problem


I just went into the Bonaire website and downloaded their FAQ on gas ducted heating from their support link. Their instructions are pretty easy to understand.

Sep 08, 2009 | Heating & Cooling

4 Answers

My bonaire vulcan ducted heating isn't working it worked last week but this week it's not. I've reset it tried to work it manually but the system is not responding to the remote


well try to check the blower fan resistor on your unit... it is possible that this part is now faulty and not working...

let me know...\\

micro

Jul 08, 2008 | Heating & Cooling

1 Answer

Vulcan ducted heating not working


How many wires for the thermostat do you have? If you tell me I can help. The green flashing, instead of red, in my experience, means a thermostat problem.

Feb 24, 2008 | Heating & Cooling

1 Answer

Vulcan CX ducted heating


sounds like the thermocouple (that sensors the heat) may be faulty.
you will need a licensed gas fitter for repairs

Feb 19, 2008 | Heating & Cooling

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

1,238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

paulcarew

Level 3 Expert

2364 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...