Question about D-Link AirPlus Xtreme G DI-624 Wireless Router (DI624RE)

1 Answer

How do you find the net key

I have misplaced the net key for my wireless network, so I can't use a second computer or visitor's computers on it. Is there anyway I can see the net key on my computer, which is working just fine wirelessly. Thanks

Posted by on

  • servin Nov 14, 2008

    i have a d-link dsl g604t



    i can find the encryption key. is this also known as the network key?



    if not where do i get the network key?



    Cheers

  • servin Nov 14, 2008

    Hi, i have a d-link dsl g604t.



    i can find the encryption key, is it the same as the network key?



    if not where is the network key?



    Cheers.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 77 Answers

Yes, you will have to log into your router's web based settings utility and bring up the tab labeled security or wireless security. It should be listed there. To log into the router, in an open internet explorer window type 192.168.1.1 or 192.168.0.1 into the address bar. This should open a window requesting username and password. If you haven't changed these settings both should be "admin". First page that opens usually is the basic settings of the router. You will have to click on the tab labeled security or wireless security. Passphrase should be there.

Good Luck

Posted on Jul 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Net ear wireless is not enabled, I did all of the set up, my phone line and wireless fax/printer is on but my laptop and I phone can't find the internet


Network Key (WEP, WPA, WPA2 Encryption key) To connect your computer to a wireless router, you click the Refresh network list, then Choose your wireless network and then click Connect to your secured Wireless Network, it will asks for a Network Key before allowing you to connect into your wireless network. This Network Key is either the WEP, or WPA or WPA2 Encryption key that is used to configure the Wireless Router. The Passphrase is an alternate way to setup the Encryption key.
When you are requested for a Network Key, you can just enter the Passphrase that was used to configure the Encryption key in the wireless router. http://www.fixya.com/support/r5270415-network_password_network_address For information on securing your wireless network, configuring the wireless router and configuring the wireless card in the laptop/computer, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Aug 14, 2012 | Routers

Tip

Wireless Network Key (WEP/WPA) Recovery


It frequently happens that one loses or forgets his/her wireless network key. Normally this key is cached on your computer and it connects automaticly, but what to do when you have a new computer and you can't remember the key you originally used( and you don't have access to the wireless router) ?

Instead of resetting (the password on) the router you could try and recover the key from another computer on the network which does succesfully connect to the network.

One of the tools which can do this for you is NirSoft WirelessKeyView (http://www.nirsoft.net/utils/wireless_key.html). It's free, safe and easy in use ... just download the right version (32 bits or 64-bits) onto the computer which does succesfully connect to the network and run it.

on Aug 17, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Find ssid number for linksys model wrt54g


SID broadcast allows computers to quickly locate a new network and connect to it. In wireless home networks computers often use only the home network, which makes SSID broadcast unnecessary. Disabling SSID broadcast adds a bit of security to your wireless network, because computers won't be able to see your network's SSID.
Log into the router.
  1. Open your webbrowser and type http://192.168.1.1 in the address bar. This is the default IP address of the browser.
  2. Type your login info in the login screen. Default: 'admin' (without quotes) in both fields.
  3. Go to Wireless > Basic Wireless Settings 'wireless
  4. Set SSID broadcast to 'disable'.
  5. Click Save Settings.
On the next page you will set a router password to prevent unwanted visitors from accessing your router setup.

Sep 23, 2011 | Linksys Wireless-G WRT54G Router

2 Answers

I dont know the code forgot the code for other computers to get conecct like a ipone for the computer


Hi,

Welcome to Fixya. If you forgot the code or the Network Key (Passphrase) we can access the Wireless Settings Page of the router to obtain the information needed to connect your iphone.

To access the router page you need a working computer that is connected to the router. To access your router you need to use a computer that is connected to it. Open a Browser then type 192.168.0.1 or http://routerlogin.net. The Default username is admin and the password is password. Password is case sensitive.

Go to the Wireless Tab select Wireless Security under the Security Mode you will see there Network Key or Passphrase. The Network Key serves as a password or security code on your network to make it secure. Network Key is case sensitive.

Don't forget to say thanks. Thanks for using Fixya

Feb 07, 2011 | NetGear Routers

1 Answer

Securing Wireless Network Access with Belkin 54g Router


Is there any computer connected to the router ?
If not then you will need to connect the computer to the router.
Do not change any wireless settings on the router with the wireless computer.
you will need to connect the computer to the router with the Ethernet cable.
check the IP address of the computer.
open the router set up page of the router.
Here you can change the wireless settings of the router.
Now once you change the network anme and security on the router, you will need to connect to the wireless network on your wireless computers.
Click Here for step by step instructions

May 02, 2010 | Belkin (F5D7230-4) Router (587009)

2 Answers

I cannot find my dlink network key to enable my laptop to the net


Your wireless network must be secured that is why you are now not able to connect to the wireless network. You will need to check the wireless settings of the router.
Do you have any computer connected to the router ?
If not then you will need to connect the computer to the router and open the set up page of the router. On this page you will find all the settings of the router. You will find the wireless network key also.

Apr 18, 2010 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

I MISPLACED MY NETWORK KEY. HOW DO I GO ABOUT ACQUIRING IT AGAIN? I'M TRYING TO ESTABLISH A WIRELESS NETWORK CONNECTION ON MY COMPUTER. THANKYOU


sign into your router and go to the section on wireless security. the key will be in there. linksys is usually 192.168.1.1 which you would type into your browser to access the router settings.

Oct 06, 2009 | Linksys Wireless-G Broadband Router

2 Answers

Forgot the Network Key


Ok, if her main computer is connected wireless, and still works, you may not have to reset the router at all.

Go here: http://www.nirsoft.net/utils/wireless_key.html

download it, and run it on her main computer. It basically finds the key that windows has already saved, and allows you to view it.

Let me know if you have any other issue. :)

May 28, 2009 | Westell Wirespeed VersaLink...

1 Answer

Second computer cant connet through the router..


You must reconfigure the wireless settings on the wireless computer. Go to Network and Sharing Center > Manage Wireless Networks. Now you must delete all the prefered wireless network profile there. If they are all deleted, click on ADD > Click Add A Network in range of this computer > Select the signal from your router and connect. If it asks you for a network key, you should know that, otherwise, contact your router provider to determine what your network key is. That should solve it.

May 06, 2009 | Routers

1 Answer

Linksys Wireless-G WRT54G Ver6


Try reconfiguring the Linksys router. Click on this link for instructions on how to configure the router with a cable Internet connection.
http://www3.nohold.net/noHoldCust56/Prod_6/KnowledgePortal/KPScripts/amsviewer.asp?docid=4da24a60bfc84fe9ad65ce672b4b8b52_KB3686_EN_070208_v1.xml&amsstatsid=4067617

After configuring the router and if you already have an Internet connection, then connect your second computer to any numbered port of the router (port 1,2,3, or 4) and test the Internet connection.
Configure the wireless settings of the router by following the steps on this link.
http://www3.nohold.net/noHoldCust56/Prod_6/KnowledgePortal/KPScripts/amsviewer.asp?docid=2f99c35863934424a932742692a5e83b_KB4024_EN_070329_v1.xml&amsstatsid=4067626

If you want to have a wireless security for your network, you may clck on this link for instructions.
http://www3.nohold.net/noHoldCust56/Prod_6/KnowledgePortal/KPScripts/amsviewer.asp?docid=2f99c35863934424a932742692a5e83b_KB4024_EN_070329_v1.xml&amsstatsid=4067626

Then try connecting your wireless computer to the name of your wireless network and enter the security key (if you have created one).

Sep 08, 2008 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
D-Link AirPlus Xtreme G DI-624 Wireless Router (DI624RE) Logo

Related Topics:

679 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Mike

Level 3 Expert

4331 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...