Problem with Asus display drivers

First boot the computer without connecting Graphic Card, then go to BIOS and find for VGA option change the option to compatible mood, save the setting and come out of it. now off the computer re connect your graphic card and start the computer.

get the motherboard out of the case and clean the AGP slot with contact cleaner and amd clean the graphic card contacts to.

Hello sifian_786, did you try to uninstall old video driver and restart computer and go to nvidia website and download latest driver for you video card and install, restart computer this should solve problem you have, are you trying to run dual LCD monitors ?

*Please Read full post before trying Also download the Online manual for this motherboard it takes only a minute and probably will answer a lot of questions you might have regarding *********** Board.*

Um... i am assuming your able to still see the display on the monitor if you plug your monitor into the on board video card. I am also assuming that the problem your talking about accursed when you plug in a video card into *********** board and then plug your monitor into that video card. I am also assuming your graphics card that you want to plug into *********** board is a AGP slot card.

If both of these conditions apply to you then try this.

Start your computer with your on board graphics card and unplug any other graphics card form *********** board.
Next go into your bios, and follow these instructions:

Go to "Advanced", "Chipset", And then "AGP configuration".

Next change your "Select AGP 3.0 Data Ratio" to "4X".

Next change your "Graphics Adapter Priority" to "AGP/Int-VGA"
*make sure its set to" AGP/Int-VGA" or your display will not work and you will need to reset your bios via the mother boards jumper cables.*

After that hit esc and go to "Exit" select "Exit

Hi,

Please check the VGA cable properly its working fine if any brokage then replace with goods one,if still same situation then your display setting has been changed from operating system .go to desktop /right click/properties/setting/advanced/select graphics card/graphics properties/color correction/and select all adnd apply it.

mother board have a problem,if warranty is still now u sent mother board service center,my friend is same problem,he send mother board and now it is ok.

if your pc wont display after the installation. the problem is centered on your video hardware. try to install the driver of your video hardware.or go to the bios setup menu then system performance down agp aperture increase the number if your using agp video cards it will help you.

you would need a new mother board or change the graphics card

Hi there
try going into the bios settings and disable the on board graphics and change it to PCI or PCI Express.
You may have to plug the monitor into the on-board VGA port to do this, once done shut the computer down and change graphics port, then restart the pc, your problem should now be solved

Good luck and kind regards

a2+b2-c2=