Question about Kenwood KDC-W3534A CD Player

1 Answer

Instruction manual Hello, Im Stephen and I need to know the functions on the face of the CD player. I know how to acces the basss,treb,left, and right features, But I do not know much more than that. I need more knowledge on the other features such as how do I set the radio stations to where I can scan through them, Because right now when I hit the left or right button it takes me through the preset buttons and not the rest of the stations available.I have model # KDC-138. I got it through a pawn shop so go figure this is why I do not have a manual for it! is there a sight I can go to that has a diagram for these things? Thanx, for your help and time!

Posted by on

  • thepudd Feb 07, 2009

    hi i have a kenwood kdc w3534 and the display screen just says protect and does not allow me to do anything else i was wondering if there is some sort of lock set on it was working fine and i have not set anything before
    please can you help

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need see the manual. for adjusted the clock


    • Turn the stereo off by pressing the "source" button on the bottom left corner of the stereo's face. Press the "function" button, the lower of the two buttons to the right of the stereo display, until the clock appears on the display. Press the arrow keys at the far right of the stereo's face to adjust the time. Use the left or right arrows to toggle between hours and minutes. Use the up and down arrow to increase or decrease the hour or minute numbers. Press the "function" button once you have set the display clock to the correct time.


Source- http://www.ehow.com/how_6881633_do-pioneer-deh_p6600-cd-player_.html

Jun 23, 2011 | Pioneer DEH-P6600 CD Player

1 Answer

I purchased a Pioneer Deh-1400 cd am fm player 2nd hand with no manual. Can anyone tell me the proper wiring connections? Only the power line is labeled.


remote turn on is blue with a white stripe and antena is blue 12+ is yellow acc is red ground is black left front is white with gray stripe right front is gray with black stripe green with black stripe is rear left and purple with black stripe is right rear

May 18, 2010 | Pioneer DEH-1400 CD Player

1 Answer

I need to know what wiring harness i need for a clarion stereo model db365usb?


try this

red -Acc power
yellow -12 memory power
black -ground
blue -amplifier remote
blue/white -power antenna
SPEAKERS
white left front +
white/black left front -
grey right front +
grey/black right front -
green left rear +
green/black left rear
purple right rear +
purple/black right rear -

Sep 25, 2009 | Clarion DB365USB CD/MP3 Player w/USB

1 Answer

Im trying to install a kenwood kdc 205 and i just need to kno which wires are which as far as the ground and speakers...etc..


red -Acc power
yellow -12 memory power
black -ground
blue -amplifier remote
blue/white -power antenna
SPEAKERS
white left front +
white/black left front -
grey right front +
grey/black right front -
green left rear +
green/black left rear
purple right rear +
purple/black right rear -

Sep 02, 2009 | Kenwood KDC-205 Car CD Player

1 Answer

Color wireing codes for DEH-P730 cd player


red - acc power
yel- battery power
blk - ground
blu - power antenna out
blu/wht - amp remote out
wht - left front +
wht/blk- left front -
gry- right front +
gry/wht- right front -
grn- left rear +
grn/wht- left rear -
prpl- right rear +
prpl/wht- right rear -

Aug 23, 2009 | iLO CA3000V CD Player

1 Answer

What color wires are what on this thing like i know yellow red and black but what are the speaker wires and rem etc.


Hello foxrider_911,

Orange is for illumination and connects to the "dimmer" wire on your vehicle wiring. Yellow/Black is the mute lead and connects to your bluetooth or hardwired audio mute function. Blue/White (terminated with a quick disconnect) is the remote wire and provides a 12V positive turn-on signal for a power antenna or remote amplifier. Speaker wiring follows the industry standard color code:
White - left front +
White/Black left front -
Gray - right front +
Gray/Black - right front -
Green - left rear +
Green/Black left rear -
Violet - right rear +
Violet/Black - right rear -

If you do not have a copy of the installation/user manual, you can download a copy from Crutchfield. It will have the complete wiring diagram and color codes as well as operating instructions.

Hope this helps.

Jun 29, 2009 | Pioneer DEH-P47DH CD Player

1 Answer

Setting the time


hey i just looked at your ? and went and figured it out on mine wat u gotta do it turn it off shuld be the button bottom left beside the vol. nob then hold function down for a bit like mabey 4 to 8 sec then use arrows like u use for bass treb adjust to set time..

=-)

Feb 18, 2008 | Pioneer DEH-P2600 CD Player

2 Answers

Durabrand Db1200 installation


As per our chat session I said I would be back while I search out your product...so here is your information; http://dbproducts.net/i/product/manual/DB1200_OM.pdf

Aug 24, 2007 | Durabrand DB1200 CD Player

Not finding what you are looking for?
Kenwood KDC-W3534A CD Player Logo

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...