Question about Packard Bell Speaker Computer Speakers

2 Answers

Packard Bell speakers screeching sound

Hello. My speakers were working just fine until they underwent some transportation which may have been too much for them. Strangely enough when I plug them into the computer, even when they are not on I can hear sound through them. Then when I switch them on and try to up either the bass or volume on the control, the subwoofer lets out a horrible screeching, high-pitched sound much like tuning an old radio! I don't think this problem is fixable unfortunately, at least without taking the thing apart...
Thanks.

Posted by on

  • sunday rose Mar 01, 2009

    hello my daughter has a apire c1 mini laptop it hasent got a cd drive, she visited you tub, while there her computer started to screech then turned itself of. so she started it back up, when she got back on a message come giving some options, start in safe mode or go to last good known configeration, she tried them both, it looked as though the windows was going to load then a blue screen with white writeing then back to were it started with the options safe mode or last good configeration, can anyone please help. thank you.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My computer has just been rebooted but now the sound dont work and iv tried other speakers and it still dont work how do i fix it

Posted on Jul 20, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 730 Answers

Are they plugged in to correct sound socket on back of computer
even if they are on monitor

Posted on Jul 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Packard bell speakers are not working, I can hear a rustling sound so there is some connection.


all of a sudden my additional speakers stop working was working ok before help me to check it or test it bplz

Nov 24, 2010 | Packard Bell Speaker Computer Speakers

1 Answer

My diamond storm speakers wont work


if they are on a computer and are not working you can try
control panel sounds and audio,volume,advanced,speakers select appropriate speakers or audio you will find 3 drop down lists make the necessary adjustments there or control panel,administrive tools,computer management,device manager,sound,could be a yellow question mark? right click to re-install drivers
hope this helps

Oct 06, 2010 | Packard Bell Speaker Computer Speakers

1 Answer

Can I fit packard bell speakers to an ibm computer?


sure the speakers are plug ad play, so just plug it to the green jack in the IBM computer

Aug 13, 2010 | Packard Bell Speaker Computer Speakers

1 Answer

I am trying to run the sound from my Packard Bell imedia x4520 computer through my Hifi amp. I think I have followed all the links on the PC regarding setting up the realtek sound for setting up external...


It sounds like the 3.5 plug is mono or the plug is not completely inserted in the computer jack (push it in until you do not see any more of the contacts). I connected one of my computers to my stereo receiver and used a splitter so I could use both my computer speakers and the stereo without disconnecting any cables. First make sure your 3.5 jack looks like the one in the link with three contacts and two insulators (the black plastic piece).
http://www.cablestogo.com/product.asp?cat_id=2009&sku=40421#
If you see only one insulator and two contacts it is mono and the second channel will be shorted out.
I would recommend using the Front Line Out which is a pre amp output into your auxiliary input on your home amplifier. If you use the headphone jack you may have clipping of the signal causing distortion.
Use the cable similar to the one in the link below or you can purchase one at Lowes or Target.
http://www.cablestogo.com/product.asp?cat_id=2009&sku=40427#
Plug the splitter male jack into the into the computer Front Line Out and the computer speakers into one female jack.
Second connect an 3.5mm to RCA stereo patch cord to the other female jack of the splitter. If you have a 3.5mm to RCA mono purchase one similar to the link below.
http://www.cablestogo.com/product.asp?cat_id=2009&sku=40613

Jan 25, 2010 | Packard Bell Speaker Computer Speakers

1 Answer

Speakers not working - PS2 plug has come out


Honestly, if they are packard bell speakers they are 1. old, 2. may have a propritery connection that is no longer found. A new set of speakers will only cost $20 at walmart, might be easier to just invest in a new set!

Oct 04, 2009 | Packard Bell Speaker Computer Speakers

1 Answer

Need help getting sound from my inbuilt speakers!


Make sure you have the right power source.  Amps make a difference,  If it requires 1 amp and you are only putting in 200 mA, then you might not have enough "juice".  You can test the speakers using an MP3 player or something of similar sort through the earphone jack.  If the speakers work, check you sound card functions.

Jun 02, 2009 | Packard Bell (160248-01) Computer Speakers

1 Answer

Logitech X-240 Sound Problem


I live in the Netherlands and i hear radio from UK, Russia and other languages. It's true it's in evening. Weather here now are rain in thunderstorm, i thought thunderstorms maybe could be the problem. Yesterday evening i heard nothing of the radio station. Hearing that radio staions is against FCC rulles. So it's possible to complain about it to radio stations. Im going to contact Logitecht tmorrow about this problem. I keep you updated.

Sep 01, 2008 | Logitech X-240 Computer Speakers

2 Answers

Speakers



Packard Bell (160248-01) Computer Speakers with a 12 volt power source worked OK,

Tried a 9 volt and it also worked.

This pair of speakers is grey with a barrel design. The mounting surface placed flat is approximately 10.25 inches by 3.75 inches. Each end has a rainbow design with a depth of 2.75 inches. By placing with the mounting surface flat on your desk gives you an out of the floor design. The front edge from the desk to the bottom edge is 1.5 from the surface to the top edge with a 3.75 inch. Suggesting you may mount them under your desk, on the side by your legs or stand them on each side of your screen.

I am told they come in white and black also I found them rather large for what I need but your decision is you should be happy before buying a pair.

1_25_2013_7_14_59_pm.jpg

Jun 23, 2008 | Packard Bell (160248-01) Computer Speakers

2 Answers

RE: "Packard-Bell speaker power requirements"


I have a power source that cam with similar speakers that is labeled Packard Bell Plug In Class 2 Power supply Model @ 012-10-1000-07 Input: 120VAC 60 hz 25W Output 9VDC 1A BPCS #:  146139 Maybe this will help

Aug 12, 2007 | Packard Bell (160248-01) Computer Speakers

Not finding what you are looking for?
Packard Bell Speaker Computer Speakers Logo

Related Topics:

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Packard Bell Computer Speakers Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

Lawrence Oravetz

Level 3 Expert

7686 Answers

Are you a Packard Bell Computer Speaker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...