Question about GE 25952 Cordless Phone

2 Answers

HEADSET when call comes in we cannot talk on other headsets at same time.Do we have to program eash set somehow.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My instructions say that "You can only use one handset at a time and there is no conference and intercom features for these units."

Posted on Sep 27, 2008

Tryertert

Posted on Sep 14, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Possibility to use speaker (handsfree) dissappeared. How to program for using handsfree?


Do you have any lights lit on the 24 buttons? Somehow, in programming, you have either activated HEADSET mode, or you dialed the code to set it. From your idle phone, press PROG and dial 61 and press ENTER. If the display says Headset Mode ON, press SEL and it will change to OFF. Press ENTER to save and EXIT to quit. You can program that under a button also, it's PROG button 67 SAVE. You can read the status of all your buttons by pressing PROG and each button in turn, noting what feature is programmed under it (like S-CO 001, VTR, Headset, etc.)


Carl

Aug 20, 2011 | Panasonic KX-T7630 Corded Phone

1 Answer

How do we reset our ring back time and our headset to where we use the speaker button to pick up and hang up


To change the hold recall timer on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
enter in 1 2 3 4 1 # (that enables programming)
The code for hold recall is #52
enter in your hold recall time in sec. and in a 3 digit format. i.e. 30 seconds = 030 a minute and a half is 090 and so on.
press # when finished
For the headset opperation, with the hanset on hook dial #09 then dial 1 to turn on the headset and turn off the handset (0 to turn on the headset and turn off the headset) then dial # to save your selection.

May 19, 2010 | Samsung Prostar 816 Phone

1 Answer

I need to know if the vodavi 30 button part number 3015-71 needs a lifter for a headset or not


No. It's a programming item and a code or softkey.

The user connects the modular headset to the handset jack on
the telephone leaving the handset in place. The ON/OFF
button on the Digital Telephone is used to initiate and end calls
while using the headset.
To activate Headset Mode:
Dial [634] on the dial pad,
-or-
Press preprogrammed HEADSET MODE button. LED lights
steady.
To deactivate Headset Mode:
Dial [634] on the dial pad,
-or-
Press the preprogrammed HEADSET MODE button. LED
extinguishes.

While Headset mode is active, the ON/OFF button
activates the headset and disables speakerphone
and intercom call announce operation at your
station.
To install the headset, see the Installation Manual.
Station must be programmed in database
programming for headset operation before the
flexible button can be programmed.

Carl

Dec 23, 2009 | Vodavi 30-BUTTONVODAV XTS Telephone

1 Answer

Nortel T7316E, How to make headset work ?


Look in the System coordinator guide 5.0 for HandFree

Select type of handfree
You must set the Handsfree at: auto
Its in the deep programming
Your going to need Business Series Terminals programming overlay to put over the phone.
  1. Press Function **266344
  2. Than enter system coordinator pass word
  3. Press SHOW once and enter your phone extension number
  4. Press SHOW twice
  5. Press NEXT tree times
  6. Change the parameter at HANDFREE with MOD
  7. Set it at AUTO
I beleved this will FIX it OK!

Jan 28, 2009 | Phones

1 Answer

Trying to set up a wireless headset


There are 2 ways to turn on headset mode. One is by programming, the other is by setting up a button.

BUTTON

Find a spare button of the 24 and label it HDST. Press PROG the button and dial 67 press ENTER then EXIT. When you press the button, the display will say HEADSET MODE ON and the button will light.Press it again to turn it off.

PROGRAM MODE

Press PROG Dial 61 ENTER and then SEL until the display says HEADSET MODE ON or OFF, then ENTER and EXIT.


Both work, but only one give you an indication when it's turned on.

Carl

Oct 01, 2008 | Panasonic KX-T7630 Corded Phone

1 Answer

Headset Mode Not Working


Your phone may not be set up to use a headset. You need to look into programming for headset mode. If this is helpful, please post as such.

Aug 04, 2008 | Vodavi 30-Button XTS Telephone

1 Answer

I have a Plantronics with a headset, but the battery does not last a day. 1- is there a phone with a larger storage compacity? Sleeples in Toronto. Thank you


if the battery is to the headset then most likley the device is faulty, unless you talk alot. on the headset package it displays the amount of talk time. if you do not have the package, call radio shack, and give them the headset modle # and they could tell you the talk time(i say radio shak because it is a small store, so the associats have knowledge of most store items).

if it is your phone battery, get a new one, let it charge fully, LET THIS NEW BATTERY DRAIN COMPLETELY UNTILL THE PHONE CUTS OFF BY ITSELF, after this, let it charge fully again and its ready for use. (this gives the battery maximum life).

Mar 21, 2008 | Phones

1 Answer

Problem with the head set


It requires a headset key to be programmed in Memory Block 4-12 as a type of Feature Access Key in order for the jack underneath the phone to work. Then you just press the button to speak via the headset.

Oct 15, 2007 | NEC DTU 16-1 Corded Phone

Not finding what you are looking for?
GE 25952 Cordless Phone Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Phones Experts

kakima

Level 3 Expert

96576 Answers

Cindy Wells

Level 3 Expert

4758 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a GE Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...