Question about Xerox Fax Machines

1 Answer

Xerox WorkCentre XD105f auto doc feed fails. The roller does not descend far enough to contact the page being fed

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

There is a spring wound clutch that is slipping in the doc feeder.
You can try cleaning it or google a place called The Parts Drop.
Call and ask for Britt he can help you with ordering the right part at a fair price.

Posted on Jul 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sln for Xerox wc 5330 error code 092-315


092-315 ATC Fail RAP
BSD-ON: BSD 9.3 - Development and Toner Dispense Control
The frequency at which the ATC Average Fail or the ATC Amplitude Fail has been occurring
has exceeded the threshold value.
NOTE: •
Although this Fault can be cleared by turning the power OFF and ON and it will be possible to output a few sheets of printouts, when this Fault has occurred a certain number of
times, it will no longer be clearable by turning the power OFF and ON. To clear it, clear the
value of NVM location [752-022] (ATC Average Fail) or NVM location [752-023] (ATC
Amplitude Fail) to "0" (
NVM Read/Write). If the machine is not repaired back to normal
status, this Fault will occur again during the operation.
• When turning the power OFF, turn OFF the power switch first and then the main power
switch.
Procedure
Check the following:
• The connection between the MCU PWB
P/J413 and the Xero/Developer Cartridge P/
J615
for open circuit, short circuit, and poor contact
• The Toner Dispense Motor for revolution failure:
Component Control [093-002] (PL 8.2)
• The Toner Cartridge for internal toner blockage
If no problems are found, replace the following parts in sequence:
• Drum Cartridge (
PL 8.1)
• MCU PWB (
PL 18.2)

See Service Manual page 827 (2-831):
https://docviewer.yandex.ru/?url=ya-disk-public%3A%2F%2FEXv3f5bJ9f7WprcvyqxuiVsXMlmyrp4nx2LzJa50u6s%3D&name=Xerox_WC_5335F_SD.pdf&page=827&c=55716712dd0d

Xerox WorkCentre 5335 Family 5325 5330 5335 Service Manual

Jun 05, 2015 | Xerox WorkCentre 5325 5330 5335 Black...

1 Answer

Xerox workcentre 3325: What do you do when you are having lines on copies when using the top feed?


NO NO NO.

Don't rush things. If you don't know how a laser printer functions, please don't touch anything. Let someone with knowledge clean the machine. Rubbing the wrong roller, can damage the printer bend repair.

Only clean the parts you are allowed to clean. Like removing dust on places outside the printing area.

Jul 15, 2014 | Xerox WorkCentre 3325/DNI - multifunction...

1 Answer

Printer producing dirty copies


it could be that the roller needs cleaning, how you do that, I don't know, but that's my guess. try printing blank white pages and see if they come out dirty

Nov 26, 2013 | Xerox WorkCentre Pro 555 Plain Paper Laser...

1 Answer

Try powering down then on again please call for assistance


WorkCentre 4250 Support - Xerox Support and Drivers

www.support.xerox.com/support/workcentre-4250/.../enus.html
XeroxProduct support for WorkCentre 4250. ... WorkCentre 4250 Support & Drivers. Fast Track to the Expert > Contact an experienced service technician ...

Jan 22, 2013 | Xerox WorkCentre 4250

1 Answer

I need the part # for a pickup roller


If anything else fails, call Xerox and ask for parts support. They might be able to sell you the part. Keep in mind you might have to purchase the whole paper feed assembly, not just the roller.
good luck.

Sep 10, 2009 | Xerox WorkCentre Pro 580 Plain Paper Laser...

1 Answer

My plain paper will not feed to print incoming fax????


If it is a WCP 580. clean the feed tire very well with something like formula 4009 then rinse it with alcohol.
Most likely that feed roller is cracked and worn. Will need replaced.

Jul 01, 2009 | Xerox WorkCentre Pro 580 Plain Paper Laser...

1 Answer

Workcentre XD105f has error code 2


Just a 2 ? No flashing e-2 or h-2 C-2 or L-2 ???
Very very odd if its just 2.

Aug 05, 2008 | Xerox Fax Machines

1 Answer

Change the drum on xerox workcentre m20, book was lost


Here is the pdf for the manual. Check out chapter 2 page 10 it has step by step instructions on installing the drum.. This should help in the removal of the drum also!

http://download.support.xerox.com/pub/docs/CopyCentre_C20/userdocs/any-os/en/UG_Eng.pdf

Good luck and dont forget to rate my response!!

May 30, 2008 | Xerox Fax Machines

2 Answers

Xerox WorkCentre Pro 785


My best guess with the A4 is that the tray guide is not set correctly. Or the machine has been told that your tray has A4 in the tray.
If you resolve the A4 issue, you will most likely resolve the jamming problem since it is looking for a longer piece of paper.
Additionally, take a cloth with a soapy cleaner. Fantastic, some cleaner like that, take out the drum, and toner cartridges and clean all the rollers you can see throughly.
If that doesnt resolve the issue then you may also have some very worn out rollers. See if they feel slick .

Nov 19, 2007 | Xerox WorkCentre Pro 785 Plain Paper Laser...

Not finding what you are looking for?
Fax Machines Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Fax Machines Experts

Whit
Whit

Level 1 Expert

185 Answers

CheckitRight
CheckitRight

Level 3 Expert

1352 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

Are you a Xerox Fax Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...