How can i connect my asus PW201 to the ps3? I use the hdmi on the ps3 and the DVI-D on the monitor but I can not have video signal (only the message "no support"). Is there a way to make it work?

check your video card settings and output selections. You may want to check and update drivers for your video card to ensure they are current.

If you see a no signal message, then it means that the signal output format of the PS3 does not match . It happens if you have previous used it on another tv and now connected it to a different tv. To resolve this, turn off the PS3 . Press and hold the power button on the PS3 till you hear three BEEPS. The PS3 should automatically detect the tv's resolution and the initial setup screen should appear. After that you should just follow on-screen instructions to set it up.

Your HP2009M monitor supports (3) methods of accepting signals from a computer. They are: 1) VGA, 2) DVI and, 3) HDMI.

You would connect the computer to the monitor using one connection only. Generally the VGA is the least desirable as it is an analog signal. The DVI and HDMI method provide digital paths into the monitor and often perform better. Your computer may only offer 1 or 2 connection choices, so you'll have to choose a cable type that is supported by both the computer and the monitor. The HDMI choice will pass audio signals to the the speakers in the monitor without needing to run a second cable between the stereo audio jack of the computer and the audio input jack of the monitor (located next to the HDMI jack) or to a set of external speakers (unless of course you prefer the external speakers).

The message you're seeing is normal. Once the monitor is connected to your computer, there will only be one active selection; VGA, DVI or HDMI. Since you're using the analog VGA jacks and cable, it is expected that you'll see a message that there is no signal present on the DVI (and HDMI) inputs when attempting to view signals on other inputs.

I hope this helps and good luck! Please rate my reply, thank you.

Your TV only has a DVI input, not an HDMI which PS3 has as an output. You can buy a HDMI to DVI adapter and connect the HDMI out of the PS3 to the DVI input of the TV. To get the true HighDef video you need a HDMI input on the TV to enjoy the full capacity of the Blu ray capabilities of the PS3. DVI came out before the HDMI standard and your picture will look good but not like HDMI. I have the same problem with my samsung 65 inch. I Bought the wrong technology. I hope this helps and good luck!

the Flat Screen TV if has, a HDMI input, also has VGA Input.

You must choose :HDMI or VGA, if HDMI The VGA board must Have HDMI Connector, and you connect a HDMI cable to the TV.

The HDMI is a digital signal input/output, VGA is Analog Signal. You must have Signal Converter if you Use the 2 signals

what Frequency is the monitor set to run at ? u will get that mesg whan the monitor is receiving a signal that is greater than what it can handle say ur monitor can take 1024x768@60hz from ur PC and maybee ur PS3 is sending 720x720@100hz so ur monitor can handle the resolution but not the refresh rate that would be why u get that message

Dude, the hdmi is just for the video signal, you'll have to use a separate audio cable to get sound from the integrated speakers.

What method are you using to connect to the monitor?

If you are using the HDMI -> DVI adapter it does not support sound. HDMI does, but DVI does not.

If that's the way you are set up then all you need to do is use the HDMI -> DVI adapter for your video and use the regular RCA connections for audio.

You can set the video and audio settings in the PS3 with the "Display Settings" and "Sounds Settings"

That way you just use the red and white RCA ends to connect to a speaker system, the yellow won't be in use at all.

This message may occur if the signal from the video adapter exceeds the scan range of the monitor (monitor not HD enabled).

The video adapter setting on PS3 for updating the screen (the refresh rate) is incompatible with the monitor.

ya nothing shows up is all black no sound nothing