Question about Sansui DTV2700 27" TV

1 Answer

Audio Garbled or Absent

Mom's TV has a great picture, but the audio is either absent or badly garbled. TV is 8 mos. old and she just entered a nursing home. I live 2,000 miles away so getting this problem resolved is challenging. Do we need to contact a service tech?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 47 Answers


Posted on Jul 05, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My quasar tv is playing audio but it has no picture how to I get it to show picture?

Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.

Nov 14, 2014 | Standard (CRT) Televisions

1 Answer

When i turn tv on there is no picture

If audio is OK, main board is faulty. If audio too is absent, main power regulator section circuit is faulty. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter".

Jul 04, 2014 | Standard (CRT) Televisions

1 Answer

Akai tv picture no sound

If picture is OK, sound should be there. Check the settings to sound first, ie, 'system' 'mute' etc, by entering the sound menu. If an improper system is selected, the sound will be either absent or distorted. If all the other settings are OK, and still there is no sound, you have to check the audio output section circuit, speakers etc?

Jul 19, 2013 | Standard (CRT) Televisions

1 Answer

My tv is connected to a UHF/VHF antenna but doesnot give sound.what could be the problem

If picture is OK, and sound is absent, you have to check its speaker first. If it is found OK, check and replace damaged component/s at the audio output section circuit.

Feb 28, 2013 | Standard (CRT) Televisions

1 Answer

Toshiba tv, model cf32c50 has a garbled sound issue.

distorted sound sometimes accompanied by buzzing is caused by detuned circuit in the SIF amplifier and sound detector circuit. a distorted sound alone is caused by a breakdown in AF amplifier circuit so try to change the sound ic since its the only options left. good luck!

Jul 27, 2010 | Toshiba Standard (CRT) Televisions

1 Answer

Bad sound-garbled and goes off on certain channels.

Go into the menu and make sure the SAP is off.

Oct 24, 2008 | Sansui DTV2760 27" TV

1 Answer


your problem is a dirty filter in your audio resistance .. need to be clean the audio module ... or tring to change to other output will solve the problem

Dec 23, 2007 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

Sony KV36XBR200

Picture tube is bad, time to retire this one!.....T.

Oct 22, 2007 | Standard (CRT) Televisions

1 Answer

Brief Startup Problem

the tv has an intermittent problem in the video circuit and related could be some cold solder that needs to be the tech to do the repairs.good luck

Apr 03, 2007 | Toshiba 36A43 36" TV

Not finding what you are looking for?
Sansui DTV2700 27" TV Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sansui Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68301 Answers


Level 1 Expert

13 Answers

rugby prop

Level 3 Expert

446 Answers

Are you a Sansui Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides